Read the statement by Michael Teeuw here.
MagicMirror install on proxmox LXC Container?
-
thanks sam…YOU ARE THE BEST :-)
-
one question: Where can i change the position from horizontal to vertical?
In what config can i change that?
-
@kusselin well that becomes much more troublesome…
the container doesn’t have display, so u can’t force it there
also, server mode doesn’t know orientation of display system .so this would typically be done on system w browser. full system in portrait or landscape.
I don’t know how you would do it just for one browser/tab…
-
ahh o.k. with installation on a pi there is the config.txt in boot an there you van change the display_rotate =1
O.K: in Container is difficult. Its ok. then thanks
-
@kusselin if u are running container on pi, AND displaying on pi, then it’s the same. if u are running container on windows, displaying on pi, it’s the same.
if displaying on windows, then have to turn windows portrait mode
-
@sdetweil said in MagicMirror install on proxmox LXC Container?:
if displaying on windows, then have to turn windows portrait mode
how is this going under win 10?
-
but there is a problem…when i started the server in the container with “npm run server” with putty… and i shut down the laptop the server is not reachable anymore :-(
means if I then eb on the ipad the 192.168.200.74:8080 enter the mirror is not accessible :-(
I have to enter again in putty then “npm run server” and then it is there…I shut down the laptop the server is no longer accessible :-(
What can be the reason for this now?
pi@MagicMirror-live:~/MagicMirror$ npm run server > magicmirror@2.21.0 server > node ./serveronly [16.10.2022 15:55.38.561] [LOG] Starting MagicMirror: v2.21.0 [16.10.2022 15:55.38.563] [LOG] Loading config ... [16.10.2022 15:55.38.566] [LOG] Loading module helpers ... [16.10.2022 15:55.38.567] [LOG] No helper found for module: alert. [16.10.2022 15:55.38.582] [LOG] Initializing new module helper ... [16.10.2022 15:55.38.582] [LOG] Module helper loaded: updatenotification [16.10.2022 15:55.38.583] [LOG] No helper found for module: clock. [16.10.2022 15:55.38.712] [LOG] Initializing new module helper ... [16.10.2022 15:55.38.712] [LOG] Module helper loaded: calendar [16.10.2022 15:55.38.713] [LOG] No helper found for module: compliments. [16.10.2022 15:55.38.713] [LOG] No helper found for module: MMM-OpenmapWeather. [16.10.2022 15:55.38.714] [LOG] No helper found for module: weather. [16.10.2022 15:55.38.722] [LOG] Initializing new module helper ... [16.10.2022 15:55.38.722] [LOG] Module helper loaded: newsfeed [16.10.2022 15:55.38.722] [LOG] No helper found for module: MMM-Traffic. [16.10.2022 15:55.38.723] [LOG] Initializing new module helper ... [16.10.2022 15:55.38.724] [LOG] Check MagicMirror² version for node helper 'MMM-Fuel' - Minimum version: 2.15.0 - Current version: 2.21.0 [16.10.2022 15:55.38.724] [LOG] Version is ok! [16.10.2022 15:55.38.724] [LOG] Module helper loaded: MMM-Fuel [16.10.2022 15:55.38.919] [LOG] Initializing new module helper ... [16.10.2022 15:55.38.921] [LOG] Module helper loaded: MMM-RNV [16.10.2022 15:55.39.141] [LOG] Initializing new module helper ... [16.10.2022 15:55.39.158] [LOG] Module helper loaded: MMM-PublicTransportHafas [16.10.2022 15:55.39.158] [LOG] Initializing new module helper ... [16.10.2022 15:55.39.158] [LOG] Module helper loaded: MMM-ioBroker [16.10.2022 15:55.39.209] [LOG] Initializing new module helper ... [16.10.2022 15:55.39.209] [LOG] Module helper loaded: MMM-COVID19-AMPEL [16.10.2022 15:55.39.211] [LOG] Initializing new module helper ... [16.10.2022 15:55.39.211] [LOG] Module helper loaded: MMM-SoccerLiveScore [16.10.2022 15:55.39.211] [LOG] No helper found for module: MMM-Snow. [16.10.2022 15:55.39.212] [LOG] No helper found for module: MMM-Carousel. [16.10.2022 15:55.39.212] [LOG] All module helpers loaded. [16.10.2022 15:55.39.277] [LOG] Starting server on port 8080 ... [16.10.2022 15:55.39.315] [WARN] You're using a full whitelist configuration to allow for all IPs [16.10.2022 15:55.39.321] [LOG] Server started ... [16.10.2022 15:55.39.332] [LOG] Connecting socket for: updatenotification [16.10.2022 15:55.39.332] [LOG] Starting module helper: updatenotification [16.10.2022 15:55.39.333] [LOG] Connecting socket for: calendar [16.10.2022 15:55.39.333] [LOG] Starting node helper for: calendar [16.10.2022 15:55.39.333] [LOG] Connecting socket for: newsfeed [16.10.2022 15:55.39.333] [LOG] Starting node helper for: newsfeed [16.10.2022 15:55.39.334] [LOG] Connecting socket for: MMM-Fuel [16.10.2022 15:55.39.334] [LOG] Starting module helper: MMM-Fuel [16.10.2022 15:55.39.334] [LOG] Connecting socket for: MMM-RNV [16.10.2022 15:55.39.449] [LOG] Connecting socket for: MMM-PublicTransportHafas [16.10.2022 15:55.39.450] [LOG] Connecting socket for: MMM-ioBroker [16.10.2022 15:55.39.451] [LOG] Connecting socket for: MMM-COVID19-AMPEL [16.10.2022 15:55.39.452] [LOG] Starting node helper for: MMM-COVID19-AMPEL [16.10.2022 15:55.39.452] [LOG] Connecting socket for: MMM-SoccerLiveScore [16.10.2022 15:55.39.453] [LOG] Starting node helper for: MMM-SoccerLiveScore [16.10.2022 15:55.39.453] [LOG] Sockets connected & modules started ... [16.10.2022 15:55.39.453] [LOG] Ready to go! Please point your browser to: http://0.0.0.0:8080and then this:
Ready to go! Please point your browser to: http://0.0.0.0:8080 ^C[16.10.2022 15:55.50.516] [LOG] [SIGINT] Received. Shutting down server... [16.10.2022 15:55.50.516] [LOG] Stopping module helper: updatenotification [16.10.2022 15:55.50.517] [LOG] Stopping module helper: calendar [16.10.2022 15:55.50.517] [LOG] Stopping module helper: newsfeed [16.10.2022 15:55.50.517] [LOG] Stopping module helper: MMM-Fuel [16.10.2022 15:55.50.517] [LOG] Stopping module helper: MMM-RNV [16.10.2022 15:55.50.517] [LOG] Stopping module helper: MMM-PublicTransportHafas [16.10.2022 15:55.50.517] [LOG] Stopping module helper: MMM-ioBroker [16.10.2022 15:55.50.518] [LOG] Stopping module helper: MMM-COVID19-AMPEL [16.10.2022 15:55.50.518] [LOG] Stopping node helper for: MMM-SoccerLiveScore -
Sam, can you help me? What stopped the Server when i closed the putty Software?
-
@kusselin
Hi,if your problem is only to keep the command running while/after you disconnected to the container you can use the “screen” command.
It you should be installed with Ubuntu already. If not you can install it withsudo apt update && sudo apt install -y screenYou then start a new screen with
screen -S NAMEwhile NAME is simply an alias and could be something like “mm”.
After this you can start the mirror with
npm run serverAnd you can leave the screen with the keyboard combination
CRTL+adThe screen then keeps running. If you want the resume to the screen you can use
screen -r NAME -
@kusselin when u disconnect a terminal session any app still running is terminated…
u can spinit off in the background with & at the end of the command
npm run server &
-
@sdetweil You are right in running apps with & in the background but if you disconnect the ssh session all background commands will be disconnected as well.
Either screen or a command like nohup needs to be used to keep the command running. -
@wishmaster270 never had one disconnected w &
-
@wishmaster270 said in MagicMirror install on proxmox LXC Container?:
@kusselin
Hi,if your problem is only to keep the command running while/after you disconnected to the container you can use the “screen” command.
It you should be installed with Ubuntu already. If not you can install it withsudo apt update && sudo apt install -y screenYou then start a new screen with
screen -S NAMEwhile NAME is simply an alias and could be something like “mm”.
After this you can start the mirror with
npm run serverAnd you can leave the screen with the keyboard combination
CRTL+adThe screen then keeps running. If you want the resume to the screen you can use
screen -r NAMEThanks, so it is going :-)
-
@kusselin and typically you would setup the container to run MM inside without user intervention… so none of those commands would be needed
-
@wishmaster270 said in MagicMirror install on proxmox LXC Container?:
npm run server
have today what changed at the mirror udn had to make reboot… now it no longer works :-(
After I executed the commands like :
screen -S MM (MM is the Name)
then
npm run server
and when i close the terminal the MMis stopping:-(
and the same when i going to cd /MagicMirror
and then i take this:
npm run server &
when i close the terminal MM is stopping…
what is my problem guys?
-
@sdetweil said in MagicMirror install on proxmox LXC Container?:
@kusselin and typically you would setup the container to run MM inside without user intervention… so none of those commands would be needed
Hi sam, unfortunately I have not yet understood why the server always stops when closing putty???
With the command npm run server I start the server… why does the container stop again?
-
@kusselin because that is the way it works. when the terminal window closes, any running app also is forced closed. it’s a security thing
during development I would not close the window. after you are happy, I would make the container auto start mm as part of it’s startup.
a containers design is to run ONE app.I do not know how I do this w lxc containers
w docker, u add a property to the Dockerfile to tell what app to start -
@wishmaster270 said in MagicMirror install on proxmox LXC Container?:
@kusselin
Hi,if your problem is only to keep the command running while/after you disconnected to the container you can use the “screen” command.
It you should be installed with Ubuntu already. If not you can install it withsudo apt update && sudo apt install -y screenYou then start a new screen with
screen -S NAMEwhile NAME is simply an alias and could be something like “mm”.
After this you can start the mirror with
npm run serverAnd you can leave the screen with the keyboard combination
CRTL+adThe screen then keeps running. If you want the resume to the screen you can use
screen -r NAMEAnd what about this… yesterday i installed screen and i Type the Commander in putty and the Containers was already online…
Now, After an reboot Nottingham is Gong :-(
-
@kusselin did the IP address change?
-
Hi sam,
This was my Solution Now
https://forum.iobroker.net/topic/52195/magic-mirror-zusammen-mit-iobroker/173?_=1666207319057
Crontab
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login