Online Radio

[tanvir586]

@wishmaster270 Just updated. Think I’m doing it right. First I’ve installed the streamlink. And then I went to the MMM-MplayerRadio folder and execute git pull.
I was bit confused about the streamlink. Didn’t understand where to install it , on the MMM-MplayerRadio folder or just normal installation. Finally I installed normally. Hope I’m doing it right.

[wishmaster270]

@tanvir586
Normal installation is the right thing. If you got sound with the new configuration everything is fine.
Hope the disconnect will be recognized correctly and your stream restarts now.

[tanvir586]

@wishmaster270 I’m not getting any sound.
config is right?

	{
		module: "MMM-MplayerRadio",
		header: "Radio",
		position: "top_center",
		config: {
			stations: [
				{
					title: "Almubarak",
					url: "https://relay.emasjidlive.uk/almubarakradio",
					logo: "https://almubarakradio.com/wp-content/uploads/2021/04/logorectangle-1024x326.png",
					customCommand: "/home/pi/MagicMirror/modules/MMM-MplayerRadio/scripts/streamlinkWrapper.bash",
					customCommandArgs: ["10", "30", "###URL###"],
				},
			],
		},
	},

I added this line aswell
customCommandArgs: [“-I”,“dummy”, “–http-reconnect”, “–http-continuous”, “###URL###”],

but didn’t work

[tanvir586]

@tanvir586 If I used this config then the sound works but open vlc in separate windows

{
	module: "MMM-MplayerRadio",
	header: "Radio",
	position: "top_center",
	config: {
		stations: [
			{
				title: "Almubarak",
				url: "https://relay.emasjidlive.uk/almubarakradio",
				logo: "https://almubarakradio.com/wp-content/uploads/2021/04/logorectangle-1024x326.png",

customCommand: “/usr/bin/vlc”,
customCommand: “/home/pi/MagicMirror/modules/MMM-MplayerRadio/scripts/streamlinkWrapper.bash”,
customCommandArgs: [“10”, “30”, “###URL###”],
},
],
},
},

[tanvir586]

If I use this config then vlc open is separate window and it’s looks like this.

	{
		module: "MMM-MplayerRadio",
		header: "Radio",
		position: "top_center",
		config: {
			stations: [
				{
					title: "Almubarak",
					url: "https://relay.livemasjid.com:8443/activestream",
					logo: "https://almubarakradio.com/wp-content/uploads/2021/04/logorectangle-1024x326.png",
					customCommand: "/home/pi/MagicMirror/modules/MMM-MplayerRadio/scripts/streamlinkWrapper.bash",
					customCommand: "/usr/bin/vlc",
					customCommandArgs: ["10", "30", "###URL###"],
				},
			],
		},
	},

picture ;-

[wishmaster270]

@tanvir586 Sorry, i am not at my pc at the moment. You only need the first customCommand line. The one with vlc is wrong.
You can try to run the run the command directly on the shell and see what happens.

/home/pi/MagicMirror/modules/MMM-MplayerRadio/scripts/streamlinkWrapper.bash 10 30 https://relay.emasjidlive.uk/almubarakradio

You can end it by pressing CRTL+c

[tanvir586]

@wishmaster270 Hi, it’s says this

tanvir@raspberrypi:~ $ /home/pi/MagicMirror/modules/MMM-MplayerRadio/scripts/streamlinkWrapper.bash 10 30 https://relay.emasjidlive.uk/almubarakradio
bash: /home/pi/MagicMirror/modules/MMM-MplayerRadio/scripts/streamlinkWrapper.bash: No such file or directory

[tanvir586]

@tanvir586 and I installed mplayer.

[wishmaster270]

@tanvir586 Are you sure you are running the latest version of the module?
The error says that the wrapper script I added yesterday does not exist.
Can you please check the script folder and check if the file is executable?

[tanvir586]

@wishmaster270 I’ve updated yesterday. I’ll check again now