Help with MMM-EmbedURL

TK421_VT

I am not going to lie, I wish I understood what you just said.

sdetweil

@TK421_VT read his instructions. you have to enable electron webView before u can use it in a module

TK421_VT

@sdetweil Thank you for trying to help, but even after reading the readme there are terms or concepts I don’t follow.

This is at the beginning of the config file:

let config = {
electronOptions: {
webPreferences: {
webviewTag: true,
}
},
address: “localhost”, // Address to listen on, can be:

Then this in the module:

{
module: “MMM-EmbedURL”,
position: “top_right”,
header: “Current Weather”,
embedElementType: “webview”,
basicElementType: “div”,
config: {
updateInterval: 120,
attributes: [
“frameborder=0”,
],
embed: [
“https://www.wunderground.com/dashboard/pws/KVTCAMBR4?cm_ven=localwx_pwsdash”
]
},
},

this is what I see in the terminal log:

[16.12.2022 21:55.38.765] [ERROR] (node:57092) electron: Failed to load URL: https://www.wunderground.com/dashboard/pws/KVTCAMBR4?cm_ven=localwx_pwsdash with error: ERR_BLOCKED_BY_RESPONSE

wishmaster270

@TK421_VT Hi,

your config looks good.
There is one last thing we can try. Can you please use your IP address (the one of the Pi) instead of localhost at the address setting.

You can get your IP either by hovering over the network icon in the top right corner of the screen or by entering

ip a

in the shell.

I had this changed for some other modules in my config cause of Cross-Origin problems and it is the only thing that is different in my setup.

TK421_VT

@wishmaster270 Thanks I will give that a try, I know the IP as I set it statically.

TK421_VT

@TK421_VT Sorry for the delay, I have been busy with Holiday stuff. I added the IP address in the config file

it still doesn’t load anything in the top right region.

This is what is in the module section in the config file

Any other thoughts?

wishmaster270

@TK421_VT Hi,

that’s weird.
Do you still have Webview enabled in the config with:

electronOptions: {
  webPreferences: {
    webviewTag: true,
  }
},

TK421_VT

@wishmaster270 I will look, I ‘think’ so. but I am not sure.

TK421_VT

@wishmaster270

wishmaster270

@TK421_VT Sorry for the late response. I will need to set up a identical environment to debug the problem. I will try to figure things out in the next days.