Cant use showEnd icloud cal

[sdetweil]

I have posted an updated fixcaldates2

this also resolves the showEndsOnlyWithDuration
and adds support for showEnd:true with full day events (non-repeating)
like vacation mon-fri, all day

just

git pull

to update…
this is my fork, not the official pull request at this time

if you are just getting this for the 1st time. do

git clone https://github.com/sdetweil/MagicMirror.git newmm
cd newmm
git checkout fixcaldates2
npm run install-mm

[evroom]

@sdetweil

Sam,

The option showEndsOnlyWithDuration is not described yet on https://docs.magicmirror.builders/modules/calendar.html.

The interaction / dependancy with showEnd also needs to be documented.

I do not know if documentation issues also can / should be done on https://github.com/MagicMirrorOrg/MagicMirror.

[evroom]

@sdetweil

Sam,

Whilst testing your last changes, I sort of see a need for a new date format parameter.
For an event with duration, spanning multiple days.
E.g. spanningDayEventDateFormat.

[TestCal: TIMESPAN_HOLIDAY]

BEGIN:VEVENT
DTSTART:20241125T110000Z
DTEND:20241127T160000Z
DTSTAMP:20241026T091719Z
UID:1lk06o70p9bp21ln3pdfda4ng0@google.com
CREATED:20241026T090035Z
LAST-MODIFIED:20241026T090035Z
SEQUENCE:0
STATUS:CONFIRMED
SUMMARY:TestCal: TIMESPAN_HOLIDAY
TRANSP:OPAQUE
END:VEVENT

For events with duration. spanning one night, like an overnight flight, it is not really necessary, but not really bad either.

[TestCal: OVERNIGHT_FLIGH]

BEGIN:VEVENT
DTSTART:20241202T190000Z
DTEND:20241203T030000Z
DTSTAMP:20241026T091719Z
UID:0s4flhmaf7p6q5atemshns4upp@google.com
CREATED:20241026T090148Z
LAST-MODIFIED:20241026T090215Z
SEQUENCE:0
STATUS:CONFIRMED
SUMMARY:TestCal: OVERNIGHT_FLIGHT
TRANSP:OPAQUE
END:VEVENT

The reasoning behind it is following:
For a ‘normal’, single, event I am not really interested in the full end date format (dateEndFormat).
That is why I normally use dateEndFormat: "HH:mm".
But for an event with duration, spanning multiple days, the setting dateEndFormat: "ddd MMM D - HH:mm" makes more sense.

dateFormat: “ddd MMM D - HH:mm”
dateEndFormat: “HH:mm”
fullDayEventDateFormat: “ddd MMM D”
[good for normal events, ‘bad’ for spanning events]:

dateFormat: “ddd MMM D - HH:mm”
dateEndFormat: “ddd MMM D - HH:mm”
fullDayEventDateFormat: “ddd MMM D”
[‘bad’ for normal events, good for spanning events]:

I hope I could explain it well enough.
And that it makes sense. :-)

Best regards,

E.J.

[sdetweil]

@evroom there is a documentation repo

[evroom]

@sdetweil said in Cant use showEnd icloud cal:

@evroom there is a documentation repo

Found it:

https://github.com/MagicMirrorOrg/MagicMirror-Documentation/issues

[evroom]

@evroom said in Cant use showEnd icloud cal:

@sdetweil said in Cant use showEnd icloud cal:

@evroom there is a documentation repo

Found it:

https://github.com/MagicMirrorOrg/MagicMirror-Documentation/issues

Opened:
https://github.com/MagicMirrorOrg/MagicMirror-Documentation/issues/266

[sdetweil]

@evroom and thinking about it, i think i just messed up the implementation (Which was broken already)

showEnd:true

should show the end for all events fullday or not

showEndsOnlyWithDuration:true should NOT show the end for full day events but DO show end for others ( because of showEnd:true)

[sdetweil]

@evroom i replied there

[sdetweil]

@evroom I just posted an update to fix showEndsOnlyWithDuration

doc added

[evroom]

@sdetweil said in Cant use showEnd icloud cal:

@evroom I just posted an update to fix showEndsOnlyWithDuration

Okay, so to recap (me talking to myself :-)):
It basically applies to a fullday event that spans multiple days.
Because a single fullday event has an equal start and end date.
And a fullday reoccurring event is just X times a single fullday event.

Google Calendar makes it a bit more difficult to understand the begin and end dates (hence the need to calculate and adjust) :

TestCal: SINGLE_FULLDAY_EVENT
Thursday, October 31

BEGIN:VEVENT
DTSTART;VALUE=DATE:20241031
DTEND;VALUE=DATE:20241101

TestCal: FULLDAY_EVENT_SPANS_3_DAYS
November 1 – 3, 2024

DTSTART;VALUE=DATE:20241101
DTEND;VALUE=DATE:20241104

Here a fullday event that spans multiple days:

BEGIN:VEVENT
DTSTART;VALUE=DATE:20241101
DTEND;VALUE=DATE:20241104
DTSTAMP:20241026T152207Z
UID:2srults5ctu7t3n4piick00gv8@google.com
CREATED:20241026T152154Z
LAST-MODIFIED:20241026T152154Z
SEQUENCE:0
STATUS:CONFIRMED
SUMMARY:TestCal: FULLDAY_EVENT_SPANS_3_DAYS
TRANSP:TRANSPARENT
END:VEVENT

‘prevent’ means: when set to false (default), you will see the end date.
When set to true, you will not see the end date.

Test with latest updates (git pull on Sat 26 Oct 16:51:00 CEST 2024):

showEnd: true.
showEndsOnlyWithDuration: false,

!

showEnd: true.
showEndsOnlyWithDuration: true,

!