MMM-CalendarExt3 only one calendar not updating

sdetweil

@emlowe waitfetch is from CalendarExt3 start to latest broadcast

i cannot see start but latest is at 11:01:33

find start time and subtract. add a couple seconds for variability

his default waitfetch is 5 SECONDS

Then after that, next screen refresh is at updateInterval time

also 23 events seems small, if this is mm v2.23.0, you did put on the clipping fixes right?

is this the SAME calendar broadcasting?
then to its first broadcast from ext3 start

emlowe

I am on the develop branch

The entire start is at 10:54:23

[2025-01-27 10:54:23.207] [LOG] Starting MagicMirror: v2.31.0-develop

I’m not sure when Ext3Agenda starts as there is no log item specific to that afaik - but I assume it’s sometime around:

[2025-01-27 10:54:26.290] [LOG] No helper found for module: MMM-CalendarExt3Agenda.

so Ext3 start is no earlier than 10:54:23 and the first broadcast was at 10:55:44 - this is much less than the 5 minutes I have manually configured for waitFetch.

(in other words, I am waiting much longer than should be needed, but it does not work unless I manually refresh)

The log at 11:01 is the second broadcast of the same calendar

I am only pulling 5 days of data and not broadcasting past events, 23 is correct.

module: "calendar",
hiddenOnStartup: true,
position: "top_left",
config: {
    broadcastEvents: true,
    broadcastPastEvents: false,
    maximumNumberOfDays: 5,
    maximumEntries: 100,
    fetchInterval: 5 * 60 * 1000,
    calendars: [
    {
        name: "family",
        URL: "<redacted>"
    }
    ]
}

module: "MMM-CalendarExt3Agenda",
position: "top_left",
config: {
    showMiniMonthCalendar: false,
    firstDayOfWeek: 1,
    startDayIndex: 0,
    endDayIndex: 0,
    calendarSet: ['family'],
    waitFetch: 5 * 60 * 1000,
    refreshInterval: 7 * 60 * 1000,
}

sdetweil

@emlowe ok, in the case of modules that only have a browser component ( no node helper) then
starting application message is the start time

another use just resolved the same issue w waitfetch, but he had multiple calendars
https://forum.magicmirror.builders/topic/19359/mmm-calendarext3agenda-on-a-higher-screen-resolution?page=2

emlowe

Further strangeness.

Let’s say I change waitFetch to something that shouldn’t work (eg 5 seconds) - clearly, this doesn’t work since the first broadcast is after a minute or so.

But if I manually refresh the browser as soon as I see the log entry about the broadcast - everything appears just fine.

So for example, setting

waitFetch: 5 * 1000,
refreshInterval: 2 * 60 * 1000,

Nothing will appear in the calendar - not at start (expected) and not after 2 mins (1 refresh), or 4 mins, or 10 mins or however long I want to wait - nothing.

But if I manually refresh - everything appears right away as long as I refresh after the broadcast log line

sdetweil

@MMRIZE will have to advise. this is the depth of my knowledge

i work on the default calendar
well, one thing
when you refresh the page, all the modules web components are reloaded. the default cal sends a request to its node helper to get events. and it has them already, so sends immediately

and of course because the default cal will be shown, its shows with the correct events, right??

emlowe

Yea, I believe the default calender is working and broadcasting correctly - not sure exactly where Ext3Agenda is having problems - but I have a few ideas I plan to try out.

emlowe

Bah! I have to apologize - I was on the develop branch but apparently, I was some commits behind and I think I was missing the commit that fixed the “clipping” problem

I made sure to update to the head of develop and things are working much better now. So it seems all along it has been the known issue

Doh!

emlowe

Actually have to take this back. Currently testing running in server only mode and a browser so I can see the console easier

When I see in the log this line:

[2025-01-27 13:52:24.893] [INFO] Calendar-Fetcher: Broadcasting 22 events from <redacted>

I can say that modules are NOT getting any calendar notifications, despite this log entry. They are not broadcast. I added some code to Ext3Agenda to print out when it gets any notification, and it never gets any CAL items. (I see it getting DOM_CREATED, DOM_UPDATED, etc,etc)

I see in the console log the following:

sorting events count=0
slicing events total maxcount=100

which seems odd given that the helper reported broadcasting 22 events. Those items repeat in the console log , but it’s always sorting events count=0

UNTIL I refresh the browser - Now I see the Ext3Agenda module getting CALENDER_EVENTS and sorting events count=22

emlowe

I guess I should have run some tests with just the standard calendar module.

Now just using the standard calendar module - and it just says “Loading” despite having also printed “Broadcasting 22 events from”

sdetweil

@emlowe as you updated to the develop branch, did you also redo the npm run install-mm