Weatherunderground - currently - hourly - daily - configurable

Crispis

Did an update with:
cd ~\MagicMirror
git pull
and then removed the “,” … still getting the black screen.

When I remove THIS particular module from my whole set, the mirror works fine. I’m not sure whats wrong in that section.

Shockwave

@Crispis Can you post your full config.js please? (if the above is just truncated) I’m wondering if there’s something just before the MMM-Wunderground module that’s causing you grief.

chrisfoerg

Are you sure that CO/Denver is correct?

Crispis

@chrisfoerg I am not sure if CO/Denver is correct. I thought it was the “STATE/CITY” and Denver happens to be very close to me so I went with that initially. It wasn’t working with the “IUTRETCH” or “NY/New_York” inputs either.

@Shockwave I already began to…start…I tried to call up the file through 192.XXX/config/config.js but that gives me a file to save, which then I can’t open as it continues to prompt the save file. When I drop it into notepad, its…word wrap made it too difficult to read and the line was not gonna happen. I’ve got… the entire config.js that I guess I could e-mail? I don’t think attaching it to this would be a good move? Better yet…what is the correct method for acquiring/posting the full config.js?

Shockwave

@Crispis
CO/Denver should be okay as that’s the same format I’m using for one of my entries which is AZ/Yuma. You could also try an airport identifier such as KDEN for Denver International.

As for saving the file, I assume you’re copying and pasting from Putty? Does turning off word wrap make it any better? Could you copy from putty and paste it in here as a code block?

Crispis

@shockwave When it comes to saving the file, I open up a file and type in the ip address then /config/config.js …I’m not too sure what Putty is… Turning off word wrap just makes the data appear on two lines but for 100 yards. It doesn’t clean things up. Have not tried the KDEN but I’ll give it a go when I’m home!

Crispis

@Shockwave Here is my current full config.js -minus the API keys. Gives me the black screen for some reason…

/* Magic Mirror Config Sample
*

By Michael Teeuw http://michaelteeuw.nl
MIT Licensed.
*/

var config = {
port: 8080,

language: 'en',
timeFormat: 12,
units: 'imperial',

modules: [
	{
		module: 'alert',
	},
	{
		module: 'clock',
		position: 'top_left'
	},
	{
		module: 'calendar',
		header: 'US Holidays',
		position: 'top_left',
		config: {
			maximumEntries: '3',
			calendars: [
				{
					symbol: 'calendar-check-o ',
					url: 'webcal://www.calendarlabs.com/templates/ical/US-Holidays.ics'
				}
			]
		}
	},
	{
		module: 'compliments',
		position: 'bottom_bar',
		config: {
			updateInterval: '1800000',
			compliments: {
				morning: [
					'What a beautiful morning!',
					'Enjoy your day!',
					'Good Morning!',
					'How was your sleep?'
					],
				afternoon: [
					'Hey good lookin!',
					'Looking good today!',
					'You\'re doing great!',
					'Looking good!'
					],
				evening: [
					'Wow, you look great!',
					'You look nice!'
					]
				}
			}
	},
	{
		module: 'currentweather',
		header: 'Firestone, CO',	
		position: 'top_right',
		config: {
			initialLoadDelay: '100',
			location: 'Firestone',
			locationID: '5577008',
			appid: '###'
		}
	},
	{
		module: 'weatherforecast',
		position: 'top_right',
		header: 'Weather Forecast',
		config: {
       	            location: 'Firestone, CO',
			locationID: '',  //ID from http://www.openweathermap.org
            		appid: '###'
		}
	},
	{
		module: 'MMM-WunderGround',
		position: 'top_right',
		header: 'WEATHER TIME',
		config: {
			apikey: '###',
			pws: 'KDEN',
			lang: 'NL',
			fctext: '1',
			fcdaycount: '5',
		fcdaystart: '0',
		hourly: '1',
		hourlyinterval: '3',
			hourlycount: '2',
			}
	},
	
]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== ‘undefined’) {module.exports = config;}

Shockwave

@Crispis Thanks for posting it. I think you’re missing a comma after appid in the weatherforecast and currentweather modules. Being at the end that may not be it, I seem to have instances where they aren’t on the last line either.

You said it works without the Wunderground module, correct? Could it be setting the language to Dutch without having Dutch selected in the International Settings within raspi-config? It sure looks okay unless there’s a hidden symbol in there. How are you editing it on the mirror?

Here’s mine if you want to try.

	{
		module: 'MMM-WunderGround',
		position: 'top_right',
		header: 'Ankeny Weather',
		config: {
			apikey: 'api key here',
			pws: 'KIKV',
			hourly: '0',
			fcdaycount: '7',
			fade: 'false',
			fadePoint: '1',
			alerttime: 10000,
			UseCardinals: 1,
			roundTmpDecs: 1,
			}
	},

Crispis

@Shockwave Copied yours exactly and I’m still gettin’ that black screen of death! I’m editing on the pi/mirror itself with the terminal+keyboard. Tried CO/Denver and NY/New_York… nothing. I’m not too sure… I’ll try to “reinstall everything” from step one and see if that fixes it.

Crispis

Honestly not too sure what I did… I mean I just re-cloned things in the module folder and now things are working. …So I guess if someone is having problems, simply start over from the beginning and try again?? No…idea… Anyways thanks for your help!