Read the statement by Michael Teeuw here.
PIR-Sensor - put your mirror to sleep if not used
-
@McSorley Thanks for the response!
Unfortunately my TV doesn’t have a sleep mode option. It automatically displays the No Signal message and turns off after a few minutes of no signal. To make that more difficult, if the TV is turned back on with the remote, it loses the resolution settings and blows everything up until the RPi is rebooted.
I’m not sure how to address this, but I think it would be ideal in my circumstance to have this module, but triggered by the PIR sensor. Idk if I can finagle that, but I suppose I can give it a shot.
-
Do we still have this problem with the node version? (v5 works, 6 not)
-
@phrazelle hi! did you find a way to disable this message? i have the same annoying one :)
-
@bibi Yes! Here is the post I submitted around the new module. Remember that you still need the MMM-PIR-Sensor module by paviro installed for this to work.
-
@phrazelle interesting! thx a lot will check this :)
-
-
Nevermind, I’m back on the white page problem… It keeps saying “Error: Module version mismatch. Expected 50, got 51”
I tried either: npm rebuild --runtime=electron --target=1.4.0 --disturl=https://atom.io/download/atom-shell --build-from-source
and: npm rebuild --runtime=electron --target=1.4.5 --disturl=https://atom.io/download/atom-shell --abi=50but it doesn’t change…
-
@AlessandroRa
Please runnpm list
and check for your electron version. Then rerun the command you already tried with the right version number -
@yawns thank you, that solved it! Now I need to understand why nothing happens even if I wave in front of the sensor…
I’m starting to think that the PIR sensor doesn’t work -
Hey all,
I am a relative novice when it comes to the Pi, and have been trying to identify why I am unable to install the dependencies via “npm install”.
I cloned the repository into my “modules” folder via the “git clone…” command (Step 1).
I then navigated into the new “MMM-PIR-Sensor” folder and ran “npm install”.
However, I got an error during the install suggesting I have an issue with electron-rebuild. Is anyone familiar with what could cause this error to be thrown, and what I could do to resolve it?
Here is the error:
Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall /home/pi/MagicMirror/modules/MMM-PIR-Sensor
electron-rebuild -e …/…/node_modules/electron-prebuilt
An unhandled error occurred inside electron-rebuild
Unable to find electron-prebuilt’s version number, either install it or specify an explicit version
Error: Unable to find electron-prebuilt’s version number, either install it or specify an explicit version
at _callee$ (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/cli.js:74:17)
at tryCatch (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/regenerator-runtime/runtime.js:63:40)
at GeneratorFunctionPrototype.invoke [as _invoke] (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/regenerator-runtime/runtime.js:337:22)
at GeneratorFunctionPrototype.prototype.(anonymous function) [as next] (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/regenerator-runtime/runtime.js:96:21)
at GeneratorFunctionPrototype.tryCatcher (/home/pi/node_modules/bluebird/js/release/util.js:16:23)
at PromiseSpawn._promiseFulfilled (/home/pi/node_modules/bluebird/js/release/generators.js:97:49)
at /home/pi/node_modules/bluebird/js/release/generators.js:201:15
at Object. (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/cli.js:197:4)
at Module._compile (module.js:570:32)
at Object.Module._extensions…js (module.js:579:10)
at Module.load (module.js:487:32)
at tryModuleLoad (module.js:446:12)
at Function.Module._load (module.js:438:3)
at Module.runMain (module.js:604:10)
at run (bootstrap_node.js:394:7)
at startup (bootstrap_node.js:149:9)
npm ERR! Linux 4.4.38-v7+
npm ERR! argv “/usr/bin/nodejs” “/usr/bin/npm” “install”
npm ERR! node v6.9.2
npm ERR! npm v3.10.9
npm ERR! code ELIFECYCLE
npm ERR! Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall:electron-rebuild -e ../../node_modules/electron-prebuilt
npm ERR! Exit status 255
npm ERR!
npm ERR! Failed at the Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall script ‘electron-rebuild -e …/…/node_modules/electron-prebuilt’.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the Magic-Mirror-Module-PIR-Sensor package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! electron-rebuild -e …/…/node_modules/electron-prebuilt
npm ERR! You can get information on how to open an issue for this project with:
npm ERR! npm bugs Magic-Mirror-Module-PIR-Sensor
npm ERR! Or if that isn’t available, you can get their info via:
npm ERR! npm owner ls Magic-Mirror-Module-PIR-Sensor
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /home/pi/MagicMirror/modules/MMM-PIR-Sensor/npm-debug.log