[MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras

Vauxdvihl

@shbatm
THANKS A LOT
Thumbs up to you
It works

nagaculun

@shbatm
It works. But I have issue with global zoom.

With the zoom value 1.5, the module size is enlarged by 1.5 while the actual video feed is not.

How do I fix this ?

Thanks

shbatm

@nagaculun You’ll have to set the width and height of the stream manually because and OMXPlayer should resize the video for you. It’s a bit trial and error, but you should be able to get it lined up very close.

Refer to the README and the moduleOffset module setting and width, height, and absPosition stream settings.

Let me know if you have issues getting it to work.

goprojojo

I need some help with this module. I can see the RTSP stream without issues BUT when I use it with the MMM-Wallpaper then the stream doesn’t show. Any suggestions?

evroom

Hello,

I have been playing with MagicMirror for 2 weeks now and am slowly getting the hang of it.
It was the MMM-RTSPStream that sparked it all and made me decide to dedicate a monitor for all the other nice modules.

Now I have a question concerning MMM-RTSPStream.
The streams are ordered from left to right and then from top to bottom, all depending on the size of the windows.
I would like to have a bit more control, like with tables.
My goal for now is to have a bigger window on the left and 2 little windows on the right.

I have no idea how to place a picture, so I try to place a link to a picture.
This shows the current implementation, with 2 streams.

Current implementation - 2 streams

Any idea where and how to achieve that (if possible at all) ??

I guess the MMM-RTSPStream.css is a place to start, but for the moment I fail to understand it to be able to make the wanted changes.
Due to a lack of knowledge of css, but I am willing to learn.

Thanks in advance and best regards,

Erik-Jan

shbatm

@evroom said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

I guess the MMM-RTSPStream.css is a place to start

@evroom – First of all welcome to the community.

You should be able to do what you’re asking by manipulating the CSS (or another way I’ll mention below).

For CSS:

First, you should put all customizations in the ~/MagicMirror/css/custom.css file so they don’t get overwritten by any module or MagicMirror updates.

Try adding this to custom.css:

.MMM-RTSPStream .innerWrapper {
    float: left;
}

Without float (original):

With float (and reducing the size of the other two streams by half and the moduleWidth settings in my config):

Background if needed for further changes: the MMM-RSTPStream draws all of the streams inside of a single, outerdiv with the "MMM-RTSPStream wrapper" classes. Each stream consists of an "MMM-RTSPStream innerWrapper"-classed div block which contains all the controls, canvas, and screenshot for each stream. This is the tag you’ll need to manipulate to get it to do what you want. If you need to override one particular stream’s size/container, you can reference it in CSS by using it’s ID, which ends in the stream number. For example, something like this:

#iw_stream1 {
    width: 123px;
}

Additional option If you’re using Raspberry Pi directly attached to the monitor and using OMXPlayer to play the streams, you can also turn off the borders and send exact sizes and locations for each stream on the monitor using the absPosition parameter. See the README on GitHub for more details. This will break any thumbnail or remote playback, though.

evroom

@shbatm said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

.MMM-RTSPStream .innerWrapper {
float: left;
}

@shbatm
Thanks a lot! Works just fine.
A bit of calculating and adjusting the margin, and it does what I wanted.

evroom

Hi,

Quite happy with MMM-RTSPStream so far; thx to those that contributed to it.

Next thing I am trying to use MMM-RTSPStream for, is streaming sat-tv from a Dreambox & VU+ receivers.
I am able to stream a channel using:

omxplayer --vol -3000 --win “0 0 480 320” --live http://192.168.178.28:8001/1:0:19:283D:3FB:1:C00000:0:0:0:

It is not a rtsp stream, but it can use omxplayer for streaming.
When I try to use MMM-iFrame, I can add the URL, but then it tries to open a program that can play mpg (and MagicMirror won’t start).
When I use it to stream using my browser (on my PC), I have it open VLC player, but installing VLC on Raspberry (using HW acceleration) is quite an act, so I would prefer to use omxplayer.

Could this be done ?

I am not so familiar with JavaScript and CCS (yet), more a Perl guy, but am willing to assist and test-drive.

evroom

Hi,

To come back to my own request.

The line that works from the command line is:

omxplayer --vol -3000 --win “0 0 480 320” --live http://192.168.178.28:8001/1:0:19:283D:3FB:1:C00000:0:0:0:

When I look at the code
https://github.com/shbatm/MMM-RTSPStream/blob/master/node_helper.js

I notice following:

–vol : not present, not really necessary, yet
–win : present
–live : present
–avdict rtsp_transport:tcp : present, needed ?
-–video_queue 4 : present, needed ?
–fps 30 : present, needed ?

When home I will try:

$ omxplayer --avdict rtsp_transport:tcp --win “0 0 480 320” --live -–video_queue 4 --fps 30 http://192.168.178.28:8001/1:0:19:283D:3FB:1:C00000:0:0:0:

And I will try:

node_helper.js :

if (this.config[s.name].protocol == “http”) {
args.unshift(“–vol 3000”);
}

evroom

Okay, it is actually quite simple.
It works without any modifications.

stream1: {
	url: 'http://192.168.178.28:8001/1:0:19:2B66:3F3:1:C00000:0:0:0:', // ZDF HD
	//url: 'http://192.168.178.28:8001/1:0:19:283D:3FB:1:C00000:0:0:0:', // ARD HD
	protocol: "tcp",
	width: 590,
	height: 332
}


2|mm       | Starting stream stream1 with args: [
2|mm       |     "--avdict",
2|mm       |     "rtsp_transport:tcp",
2|mm       |     "--win",
2|mm       |     "4, 608, 594, 940",
2|mm       |     "--live",
2|mm       |     "--video_queue",
2|mm       |     "4",
2|mm       |     "--fps",
2|mm       |     "30",
2|mm       |     "http://192.168.178.28:8001/1:0:19:2B66:3F3:1:C00000:0:0:0:"
2|mm       | ]
2|mm       | Starting PM2 for omx_stream1
2|mm       | PM2 started for omx_stream1

It is just that the Raspberry Pi 3 Model 3 and omxplayer only can handle 1 TS stream, as it appears to be the case.
Simular like the max. 3 RTSP camera streams.

So, if you do not use omxplayer for something else and you want to use MMM-RTSPStream for streaming just the one TS channel, it can be used.