Time and Date Do not Update
I’m building my first mirror, and I’m having trouble with the time and date. I followed the installation instructions very closely, and everything was working at first. However, I realized that when I shut everything down and turned it on a few days earlier, the system date and time started from right where they left off (right now I’m about 6 days behind). I’ve read through a few forums and haven’t gotten it to work. I realize this is not a Magic Mirror question, but more of a RPi system question.
-I definitely have the correct time zone, region, etc. This does not correct anything if I’m off.
-The time updates when I do this: "sudo date -s “Thu Aug 9 21:31:26 UTC 2012"” but then does not update if the pi is turned off and on again.
-I’m connected through my wifi- not an ethernet cable.
-I’ve also tried this since it’s been suggested:
//sudo /etc/init.d/ntp stop //sudo /etc/init.d/ntp start
This is probably a rather simple fix, but I’m new to this. Any help is appreciated.
Does anyone have any advice?
Does anyone have any advice?
Since you’ve been waiting for 17 days for help, then perhaps you’ll spend the time to start from scratch. Wipe your SD card, get a new raspbian image and install that. You shouldn’t have to run any commands for your time and date to work properly, other than setting it initially.
Just my 2 cents
@hall1458 Wow. Dude, I’m sorry that nobody has stepped in to help you out. I’m not much of a *nix guy, but I’ve been dealing with this at work for various reasons. I’ll do what I can.
The NTP service should synchronize your Pi’s clock with one of many time servers out on the internet. If you get a terminal onto your Pi and type
ps ax | grep ntpdyou should see this line in return:
602 ? Ss 0:04 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 106:111. Some parts will be different. This is good. If all you see is
grep --color=auto ntpthen the NTP service isn’t running. Post back here and we’ll get that fixed.
Assuming that NTP is running on your pi, you will want to check the configuration of your NTP server. Type
nano /etc/ntp.conf. If you see a blank screen/file, then you have a problem. Assuming you do see a file, you want to look for the following lines:
# pool: server 0.debian.pool.ntp.org iburst server 1.debian.pool.ntp.org iburst server 2.debian.pool.ntp.org iburst server 3.debian.pool.ntp.org iburst
These are the servers that your Pi will be checking for a valid time. You can manually check them as well. Exit the
/etc/ntp.conffile and type
ntpq -pnand wait. You should see something like this:
remote refid st t when poll reach delay offset jitter ============================================================================== +184.108.40.206 .PPS. 1 u 856 1024 377 18.624 -1.660 5.766 +220.127.116.11 18.104.22.168 2 u 468 1024 377 27.636 0.276 6.356 *22.214.171.124 .GPS. 1 u 839 1024 377 37.422 0.189 4.440 +126.96.36.199 188.8.131.52 2 u 713 1024 377 48.940 -1.173 2.743
At least one of those lines should have an asterisk at the beginning. Give it a go and report back.