Electron CPU usage

MichMich

For anyone running into this issue, run the following command from your MagicMirror folder:

 npm install electron@1.4.15

bhepler

One more data point: The Pi behind my office mirror was doing okay, until I enabled the MMM-Snow module. Short version is that I had to downgrade Electron to 1.4.15 but now it’s running pretty well with 50 snowflakes.

schlachtkreuzer6

@MichMich


> electron@1.4.15 postinstall /home/pi/MagicMirror/node_modules/electron
> node install.js

magicmirror@2.1.3 /home/pi/MagicMirror
├── electron@1.4.15  invalid
└── UNMET PEER DEPENDENCY stylelint@7.13.0 invalid

npm WARN grunt-stylelint@0.9.0 requires a peer of stylelint@^8.0.0 but none was installed.
npm WARN stylelint-config-recommended@1.0.0 requires a peer of stylelint@^8.0.0 but none was installed.
npm WARN stylelint-config-standard@17.0.0 requires a peer of stylelint@^8.0.0 but none was installed.

bhepler

@schlachtkreuzer6 I had the same error when I downgraded. However, it did install and I am able to run the Magic Mirror process. I am getting a temperature warning. I’ll experiment a bit to see if I can narrow that down.

schlachtkreuzer6

@bhepler Yeah funny!
But you´re right. It install electron and the temperature sinks from 82-85°C to 52-55°C and the animations are smooth. Only the error massage is strange!

bhepler

@schlachtkreuzer6 Technically, they’re not error messages. They’re warnings. If they become serious, then they will be promoted to errors.

Tourpe

@MichMich Got a similar issue as reported by @schlachtkreuzer6, unfortunately I now have a black screen when starting. Logs show “WARNING! Could not load config file. Starting with default configuration. Error found: Error: Module version mismatch. Expected 50, got 54”. Any suggest on how to revert?

Update: Managed to successfully revert back but doing a " npm install electron".

Sandy2503

i have a problem at downgrading:

pi@magicmirror:~ $ cd ~/MagicMirror
pi@magicmirror:~/MagicMirror $  npm install electron@1.4.15

> electron@1.4.15 postinstall /home/pi/MagicMirror/node_modules/electron
> node install.js

- @types/node@7.0.43 node_modules/@types/node
magicmirror@2.1.3 /home/pi/MagicMirror
└── electron@1.4.15  invalid

How can i fix that ?

Sandy2503

cruunnerr

Hey guys,

(first, sorry for my english. i hope you understand what i am trying to tell^^)

i have got the same problem as u all.

So i tried to fix it with using MagicMirror 2.1.0 and electron 1.4.15

Unfortunately i am not the best programer, so sometimes i don’t know if i’m doing anything right.

Well, i tried the option as shown in this thread on page 18 (https://forum.magicmirror.builders/post/28875)

That gave me some npm errors when i type “npm start”.
So i tried to use this guide: https://forum.magicmirror.builders/topic/5274/how-to-manually-install-mm-on-your-pi-for-absolute-beginners

But it gave me the same errors.

Step by step i did:

rename the original MM-Folder to “MagicMirror_OLD”
Downloaded this https://github.com/MichMich/MagicMirror/archive/v2.1.0.zip
extract it and rename it to “MagicMirror”
cd in this folder and type “npm install”
after installing was done i typed “npm start” and got this:

pi@MagicMirror:~ $ cd ~/MagicMirror/
pi@MagicMirror:~/MagicMirror $ npm start

> magicmirror@2.1.0 start /home/pi/MagicMirror
> electron js/electron.js


npm ERR! Linux 4.9.59-v7+
npm ERR! argv "/usr/bin/node" "/usr/bin/npm" "start"
npm ERR! node v6.12.2
npm ERR! npm  v3.10.10
npm ERR! code ELIFECYCLE
npm ERR! magicmirror@2.1.0 start: `electron js/electron.js`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the magicmirror@2.1.0 start script 'electron js/electron.js'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the magicmirror package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     electron js/electron.js
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs magicmirror
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls magicmirror
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/MagicMirror/npm-debug.log
pi@MagicMirror:~/MagicMirror $

Another time i tried as shown on page 18. it was showing me, that i was using electron 1.4.15, but when i typed the “npm start” it shows me the same message as above.

i don’t know what to do :( would be quite nice, if u guys could invest some time to solve my problem together. thank you very much :)

edit:

the “npm-debug.log” is here:

``
0 info it worked if it ends with ok
1 verbose cli [ ‘/usr/bin/node’, ‘/usr/bin/npm’, ‘start’ ]
2 info using npm@3.10.10
3 info using node@v6.12.2
4 verbose run-script [ ‘prestart’, ‘start’, ‘poststart’ ]
5 info lifecycle magicmirror@2.1.0~prestart: magicmirror@2.1.0
6 silly lifecycle magicmirror@2.1.0~prestart: no script for prestart, continuing
7 info lifecycle magicmirror@2.1.0~start: magicmirror@2.1.0
8 verbose lifecycle magicmirror@2.1.0~start: unsafe-perm in lifecycle true
9 verbose lifecycle magicmirror@2.1.0~start: PATH: /usr/lib/node_modules/npm/bin/node-gyp-bin:/home/pi/MagicMirror/node_modules/.bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games
10 verbose lifecycle magicmirror@2.1.0~start: CWD: /home/pi/MagicMirror
11 silly lifecycle magicmirror@2.1.0~start: Args: [ ‘-c’, ‘electron js/electron.js’ ]
12 silly lifecycle magicmirror@2.1.0~start: Returned: code: 1 signal: null
13 info lifecycle magicmirror@2.1.0~start: Failed to exec start script
14 verbose stack Error: magicmirror@2.1.0 start: electron js/electron.js
14 verbose stack Exit status 1
14 verbose stack at EventEmitter. (/usr/lib/node_modules/npm/lib/utils/lifecycle.js:255:16)
14 verbose stack at emitTwo (events.js:106:13)
14 verbose stack at EventEmitter.emit (events.js:191:7)
14 verbose stack at ChildProcess. (/usr/lib/node_modules/npm/lib/utils/spawn.js:40:14)
14 verbose stack at emitTwo (events.js:106:13)
14 verbose stack at ChildProcess.emit (events.js:191:7)
14 verbose stack at maybeClose (internal/child_process.js:920:16)
14 verbose stack at Process.ChildProcess._handle.onexit (internal/child_process.js:230:5)
15 verbose pkgid magicmirror@2.1.0
16 verbose cwd /home/pi/MagicMirror
17 error Linux 4.9.59-v7+
18 error argv “/usr/bin/node” “/usr/bin/npm” “start”
19 error node v6.12.2
20 error npm v3.10.10
21 error code ELIFECYCLE
22 error magicmirror@2.1.0 start: electron js/electron.js
22 error Exit status 1
23 error Failed at the magicmirror@2.1.0 start script ‘electron js/electron.js’.
23 error Make sure you have the latest version of node.js and npm installed.
23 error If you do, this is most likely a problem with the magicmirror package,
23 error not with npm itself.
23 error Tell the author that this fails on your system:
23 error electron js/electron.js
23 error You can get information on how to open an issue for this project with:
23 error npm bugs magicmirror
23 error Or if that isn’t available, you can get their info via:
23 error npm owner ls magicmirror
23 error There is likely additional logging output above.
24 verbose exit [ 1, true ]

Sandy2503

@cruunnerr - I `ve done it !
without previous Unistall

i have downgraded with:

sudo npm install -g electron@1.4.15

Sandy2503