MMM-xiaomi - Temperature and Humidity from your smarthome

mirko3000

Hmm your config seems to be fine, make sure the IDs are ok, else it should work. Be aware that the icon only shows open window/doors, so if the door is closed you won’t see an icon.
I suppose the temperature sensor is working fine?

joseska

@mirko3000 Now Work… I don´t know why…
simply copy again the id (the same) and change showVentilation: false (don´t have outdoor sensor) and work…

sorry and thanks…

Smotx

HI,

Anyone know why MMM Xiaomi need aplay ?

Error: Cannot find module 'node-aplay'
    at Module._resolveFilename (module.js:543:15)
    at Function.Module._resolveFilename (/home/pi/MagicMirror/node_modules/electron/dist/resources/electron.asar/common/reset-search-paths.js:35:12)
    at Function.Module._load (module.js:473:25)
    at Module.require (module.js:586:17)
    at require (internal/module.js:11:18)
    at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-xiaomi/node_helper.js:11:20)
    at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-xiaomi/node_helper.js:140:3)
    at Module._compile (module.js:642:30)
    at Object.Module._extensions..js (module.js:653:10)
    at Module.load (module.js:561:32)
Whoops! There was an uncaught exception...

Thanks

Smotx

@mirko3000 said in MMM-xiaomi - Temperature and Humidity from your smarthome:

I just recieved my order of another 6 window sensors yesterday :) But I really think they will shut this down soon, guess they (gearbest) are not paying any taxes at all…

Working on the new version, this is what I have in mind:

How to have this screen ?

Smotx

This post is deleted!

Smotx

it seems that these window sensors are not compatible.

Xiaomi Aqara Window Door Sensor

I added them to the config module and no return on MM.

When i launch

miio discover

it found

Device ID: 158d0001ab1f9c
Model info: lumi.magnet.aq2

but when i launch npm start, MMM-xiaomi say

Found device with ID 158d0001ab1f9c of type generic

and no

Found device with ID 158d0001ab1f9c of type magnet

Smotx

Thanks to owner of module : @mirko3000 for update to see this sensor !

Now that’s work

VagelisAn

Dear @mirko3000 i have follow your instraction and i install the MMM-Xiaomi, i install and the miio to get the access token but the scan of miio is not find the getaway accesstoken

pi@raspberrypi:~ $ miio discover
 INFO  Discovering devices. Press Ctrl+C to stop.

Device ID: 631XXXXX
Model info: Unknown
Address: XXX.XXX.X.XXX
Token: ???
Support: Unknown

I use the MI application and get the ip and accessToken and the id from temperature sensor.
The name is lumi.158xxxxxxxxxxx
this is the code of config

module: 'MMM-xiaomi',
		position: 'top_right',
		header: 'Temperature / Humidity',  // This is optional
		config: {
			config: {
			gatewayIP: 'IP getaway from MI home',
			gatewayToken: 'accese getaway from MI home',
			showWindow: true,
			showVentilation: true,
			showLights: false,
			audioNotifications: true,
			rooms:  [
				{
					name: 'Bedroom-Mi Temp',
					sortOrder: 10,
					devices : ['lumi.158xxxxxxxxxxx']
				},
					]
					}
		}

I execute and i have this error in terminal andthe xiaomi modules say connecting to xiaommi getaway.

{ Error: Call to device timed out
    at retry (/home/pi/MagicMirror/modules/MMM-xiaomi/node_modules/miio/lib/devi             ce.js:225:18)
    at _ensureToken.catch.err (/home/pi/MagicMirror/modules/MMM-xiaomi/node_modu             les/miio/lib/device.js:238:8)
    at <anonymous> code: 'timeout' }

Sorry if my English is bad

gh057

Has anyone tried to get the module to work with a Gateway AND a Yeelight bed lamp ??

I mean i have the module working with my gateway (manually added the token, and then the sensors appeard in miio discovery) but i havent managed to get it to work with the yeelight lamp (that also acts as a bluetooth gateway for my other sensors).

When i reseted the lamp, and connected to its wifi, i discovered it with miio and extracted the token, but later when i registered the lamp with the mi app, and connected my pi to my wifi, while the lamp is pingable by the pi, now miio doesn’t discover it!!

But, besides that, even if i manage to discover the lamp again with miio, i’m not aware if its even possible to add a second gateway to the module.

Does anyone know??

gauka12345

HI there i have got same problem the gateway was turned off
then i have tried to reconnect all the temperature sensors and tokens shows with ??? question marks… can some one help please!