MMM-xiaomi - Temperature and Humidity from your smarthome

Smotx

Thanks to owner of module : @mirko3000 for update to see this sensor !

Now that’s work

VagelisAn

Dear @mirko3000 i have follow your instraction and i install the MMM-Xiaomi, i install and the miio to get the access token but the scan of miio is not find the getaway accesstoken

pi@raspberrypi:~ $ miio discover
 INFO  Discovering devices. Press Ctrl+C to stop.

Device ID: 631XXXXX
Model info: Unknown
Address: XXX.XXX.X.XXX
Token: ???
Support: Unknown

I use the MI application and get the ip and accessToken and the id from temperature sensor.
The name is lumi.158xxxxxxxxxxx
this is the code of config

module: 'MMM-xiaomi',
		position: 'top_right',
		header: 'Temperature / Humidity',  // This is optional
		config: {
			config: {
			gatewayIP: 'IP getaway from MI home',
			gatewayToken: 'accese getaway from MI home',
			showWindow: true,
			showVentilation: true,
			showLights: false,
			audioNotifications: true,
			rooms:  [
				{
					name: 'Bedroom-Mi Temp',
					sortOrder: 10,
					devices : ['lumi.158xxxxxxxxxxx']
				},
					]
					}
		}

I execute and i have this error in terminal andthe xiaomi modules say connecting to xiaommi getaway.

{ Error: Call to device timed out
    at retry (/home/pi/MagicMirror/modules/MMM-xiaomi/node_modules/miio/lib/devi             ce.js:225:18)
    at _ensureToken.catch.err (/home/pi/MagicMirror/modules/MMM-xiaomi/node_modu             les/miio/lib/device.js:238:8)
    at <anonymous> code: 'timeout' }

Sorry if my English is bad

gh057

Has anyone tried to get the module to work with a Gateway AND a Yeelight bed lamp ??

I mean i have the module working with my gateway (manually added the token, and then the sensors appeard in miio discovery) but i havent managed to get it to work with the yeelight lamp (that also acts as a bluetooth gateway for my other sensors).

When i reseted the lamp, and connected to its wifi, i discovered it with miio and extracted the token, but later when i registered the lamp with the mi app, and connected my pi to my wifi, while the lamp is pingable by the pi, now miio doesn’t discover it!!

But, besides that, even if i manage to discover the lamp again with miio, i’m not aware if its even possible to add a second gateway to the module.

Does anyone know??

gauka12345

HI there i have got same problem the gateway was turned off
then i have tried to reconnect all the temperature sensors and tokens shows with ??? question marks… can some one help please!

gauka12345

pi@raspberrypi:~/miio $ miio discover
INFO Discovering devices. Press Ctrl+C to stop.

Device ID: 72558327
Model info: lumi.gateway.v3
Address: 192.168.0.9
Token: ???
Support: At least generic

Smotx

hi,

Same problem here too

I have changed my router, so i have change wifi of Xiaomi hub

On magicmirror config i have set new ip 192.168.2.xxx (before 192.168.1.xxx).

But always nothing on MagicMirror after reboot.

perhaps token has changed with new router… So, on the rasp i launch command ```
miio discover


` $ sudo miio discover
 INFO  Discovering devices. Press Ctrl+C to stop.

Device ID: 567xxxx54
Model info: Unknown
Address: 192.168.2.xxx
Token: ???
Support: Unknown
`

Anybody know why ? :(.

gauka12345

Hi
You can get token by installing older version of mi home app on you mobile
https://www.apkmirror.com/apk/xiaomi-inc/mihome/mihome-5-0-19-release/mihome-5-0-19-android-apk-download/
Then you will need to follow this tutorial to obtain the token
https://www.youtube.com/watch?v=Q4QV8tMI8H4
however so far i have swap the tokens but with no luck. i think the device need to be discovered by MIiio.

Smotx

@gauka12345

I gave found new token on Mi home app android, it worked a few days, and then again it does not work anymore, it tells me ‘time out’ and in mioo discover there is nothing at all

{ Error: Call to device timed out
at retry (/home/pi/MagicMirror/modules/MMM-xiaomi/node_modules/miio/lib/device.js:225:18)
at _ensureToken.catch.err (/home/pi/MagicMirror/modules/MMM-xiaomi/node_modules/miio/lib/device.js:238:8)
at code: ‘timeout’

garbleflux

@smotx said in MMM-xiaomi - Temperature and Humidity from your smarthome:

hi,

Same problem here too

I have changed my router, so i have change wifi of Xiaomi hub

On magicmirror config i have set new ip 192.168.2.xxx (before 192.168.1.xxx).

But always nothing on MagicMirror after reboot.

perhaps token has changed with new router… So, on the rasp i launch command ```
miio discover
` $ sudo miio discover
 INFO  Discovering devices. Press Ctrl+C to stop.

Device ID: 567xxxx54
Model info: Unknown
Address: 192.168.2.xxx
Token: ???
Support: Unknown
`

Anybody know why ? :(.

I had the same problem. Meanwhile, I have found the solution. An update from Xiaomi changed the token in the gateway. This must now be read out via the smartphone. In my case the miio discovery command did not work any more. I followed this instruktion to get the new token

https://forum.smartapfel.de/forum/thread/1219-xiaomi-mi-gateway-homebridge-mi-aqara/?postID=31779#post31779

… and now all works fine again - I have all my sensors back on the mirror.

regards
Mike

Smotx

after this command :

miio tokens update 567xxxxx --token 6xxxxxxxxxxxxxxxxxxxxxxxxxxx

mine to work again a few days, and now is KO again… for the third time… :face_with_steam_from_nose: Token has not changed, ip has not changed…