Read the statement by Michael Teeuw here.
Sync private iCloud calendar with MagicMirror
-
A while ago, I posted a thread for syncing an iCloud calendar with MagicMirror. Unfortunately this solution was just a workaround and you needed to use a Mac which is also synced with your calendar. It was far from being a nice solution.
I just found out that the tool I was using (
vdirsyncer) also supports syncing with iCloud. I wrote a detailed walkthrough for this.I’ll re-post this part from the original post:
Why doing it this way?
I don’t want my calendar to be available via a public URL like mentioned in the iCloud calendar thread. Even though the public sharing address is quite long, web crawlers can still find them and your private life is publicly available. I just don’t like that scenario. So I wanted a solution that uses encryption and authentication against all services.
So here’s a really nice solution to sync the mirror with iCloud (privately):
Get app-specific password from iCloud
vdirsyncerneeds an app-specific password to connect to iCloud. You can create one in your AppleID settings like descibed in Apple’s support document for using app-specific passwords: https://support.apple.com/en-us/HT204397Create one and write it down for later.
Install and set up
vdirsyncervdirsyncerneeds to be installed on the machine that hosts your mirror software. On my raspbian system,vdirsyncerwas not available viaapt. So I hat to install it viapip.Installation of
vdirsyncerNow we get
vdirsyncerand it’s dependencies:sudo apt-get install libxml2 libxslt1.1 zlib1g python3 pip3 install --user --ignore-installed vdirsyncer(This is the quick and easy way, it should suffice for most users. For a more clean way to install it, please refer to https://vdirsyncer.pimutils.org/en/stable/installation.html#the-clean-hard-way)
Now, change the first line of your
vdirsyncerexecutable to use onlypython3:nano ~/.local/bin/vdirsyncerAnd change the first line to
#!/usr/bin/python3I needed to create a symlink to the vdirsyncer executable. So we’re doing this:
sudo ln -s /home/pi/.local/bin/vdirsyncer /usr/bin/vdirsyncerNow you should be able to use the
vdirsyncercommand from the command line.Create a folder for the calendar file
As mentioned in this post, we can put the calendar file into the modules folder to access it via the calendar module. So we create a folder for our calendars:
mkdir /home/pi/MagicMirror/modules/calendarsConfigure
vdirsyncerCreate a config file in
~/.vdirsyncer/configand open it withnano:mkdir ~/.vdirsyncer touch ~/.vdirsyncer/config nano ~/.vdirsyncer/configHere’s an example configuration to use with iCloud. Just copy it into your opened file in
nanoand enter your iCloud credentials.# vdirsyncer configuration for MagicMirror. # # Move it to ~/.vdirsyncer/config or ~/.config/vdirsyncer/config and edit it. # Run `vdirsyncer --help` for CLI usage. # # Optional parameters are commented out. # This file doesn't document all available parameters, see # http://vdirsyncer.pimutils.org/ for the rest of them. [general] # A folder where vdirsyncer can store some metadata about each pair. status_path = "~/.vdirsyncer/status/" # CALDAV Sync [pair iCloud_to_MagicMirror] a = "Mirror" b = "iCloud" collections = ["HERE-GOES-THE-UUID-OF-THE-CALENDAR-YOU-WANT-TO-SYNC"] # Calendars also have a color property metadata = ["displayname", "color"] [storage Mirror] # We need a single .ics file for use with the mirror (Attention! This is really slow on big amounts of events.) type = "singlefile" # We'll put the calendar file to a readable location for the calendar module path = "/home/pi/MagicMirror/modules/calendars/%s.ics" [storage iCloud] type = "caldav" url = "https://caldav.icloud.com/" # Authentication credentials username = "YOUR-ICLOUD-EMAIL-ADDRESS" password = "HERE-GOES-YOUR-APP-SPECIFIC-ICLOUD-PASSWORD" # We only want to sync in the direction TO the mirror, so we make iCloud readonly read_only = true # We only want to sync events item_types = ["VEVENT"] # We need to keep the number of events low, so we'll just sync the next month # Adjust this to your needs start_date = "datetime.now() - timedelta(days=1)" end_date = "datetime.now() + timedelta(days=30)"Make sure, you use the
start_dateandend_dateparameters to keep the number of calendar events low. I tried syncing with 700+ events and it is really really sloooooow! Especially when using thesinglefileoption for the mirror.Add your iCloud credentials like shown in the config file.
Running
vdirsynceras a systemd.timer for automatic syncInstall the
vdirsyncer.serviceandvdirsyncer.timerfiles to/etc/systemd/user:curl https://raw.githubusercontent.com/pimutils/vdirsyncer/master/contrib/vdirsyncer.service | sudo tee /etc/systemd/user/vdirsyncer.service curl https://raw.githubusercontent.com/pimutils/vdirsyncer/master/contrib/vdirsyncer.timer | sudo tee /etc/systemd/user/vdirsyncer.timerBy default, the syncer is started every 15 minutes. You can change it by configuring the times in the
vdirsyncer.timerfile:sudo nano /etc/systemd/user/vdirsyncer.timerNow we activate the timer in systemd:
systemctl --user enable vdirsyncer.timerLet
vdirsyncerdiscover the collections and do the inital syncNow, we have to find out, which collection we want to sync. Let
vdirsyncerdiscover everything:vdirsyncer discoverYou should get an output like this (depending on the number of calendars you have in iCloud):
Discovering collections for pair iCloud_to_MagicMirror Mirror: iCloud: - "25CB285C-E163-4E0E-B420-C3FB469B7C00" ("Calendar 1") - "9221FEE8-E8B4-4D07-9402-8638529919EC" ("Calendar 2") - "953A5477-E405-4ED6-A5C3-473444EACC95" ("Calendar 3") warning: No collection "HERE-GOES-THE-UUID-OF-THE-CALENDAR-YOU-WANT-TO-SYNC" found for storage Mirror. Should vdirsyncer attempt to create it? [y/N]:Choose
Nfor now and pressreturn.
Now replace theHERE-GOES-THE-UUID-OF-THE-CALENDAR-YOU-WANT-TO-SYNCin the config with the UUID of the calendar you want to sync.
We assume, we want to sync “Calendar 2”.So line 19 of your config should look like this:
collections = ["9221FEE8-E8B4-4D07-9402-8638529919EC"]Now, we can run the discover again and make the first sync:
vdirsyncer discoverYou should get something loke this:
Discovering collections for pair iCloud_to_MagicMirror Mirror: iCloud: - "25CB285C-E163-4E0E-B420-C3FB469B7C00" ("Calendar 1") - "9221FEE8-E8B4-4D07-9402-8638529919EC" ("Calendar 2") - "953A5477-E405-4ED6-A5C3-473444EACC95" ("Calendar 3") warning: No collection "9221FEE8-E8B4-4D07-9402-8638529919EC" found for storage Mirror. Should vdirsyncer attempt to create it? [y/N]:Choose
yand pressenter. Now we can start the sync with:vdirsyncer syncYou should find a single calendar file in
/home/pi/MagicMirror/modules/calendars/with the UUID of your calendar as filename like221FEE8-E8B4-4D07-9402-8638529919EC.icsin this example.Add the calendar file to the calendar module of the mirror
Now, we just have to add the URL to the calendar file to our calendar module of the mirror like this:
{ module: 'calendar', position: 'top_left', // This can be any of the regions. Best results in left or right regions. config: { maximumNumberOfDays: 10, maximumEntries: 7, calendars: [ { url: 'http://localhost:8080/modules/calendars/221FEE8-E8B4-4D07-9402-8638529919EC.ics', symbol: 'calendar' } ] } },If everything went well, your MagicMirror is now automatically syncing your iCloud calendar with it’s calendar module :)
-
Does this allow the option for different icons for different calenders? I’m just starting to build mine and would like to sync two seperate iCloud calenders and have them display with different icons/colours
-
Yes, this should allow multiple coloured calendars.
You just have to add the UUIDs for each calendar you want to sync to thecollectionsarray in yourvdirsyncerconfig.
This should create multiple.icsfiles. One for each calendar. Then you could add each calendar to your MagicMirror config and use thecoloroption described in the default calendar module for your calendars. Just add thecoloredoption to your “global” module config and add acoloroption to each calendar.A calendar config could look like this then (for “Calendar 1” and “Calendar 2” as described above):
{ module: 'calendar', position: 'top_left', // This can be any of the regions. Best results in left or right regions. config: { colored: true, // Activate coloring maximumNumberOfDays: 10, maximumEntries: 7, calendars: [ // "Calendar 1" { url: 'http://localhost:8080/modules/calendars/25CB285C-E163-4E0E-B420-C3FB469B7C00.ics', symbol: 'calendar' color: '#123456' // Assign color }, // "Calendar 2" { url: 'http://localhost:8080/modules/calendars/221FEE8-E8B4-4D07-9402-8638529919EC.ics', symbol: 'calendar' color: '#ABCDEF1' // Assign color } ] } }, -
hello how do we get the links calendars icloud thank you
-
@Doubleve What do you mean?
-
I will like my 3 calendars icloud but I do not see the links of the style
https://p02calendars.icloud.com/published/2/xxxxxxxxxxxxxxxxxxxxxQhtoAvoFiIwGI1
To have UUID -
@Doubleve You don’t need these links, since
vdircsyncerdiscovers your calendars automatically on iCloud and identifies them by their IDs.It is explained in the “Let
vdirsyncerdiscover the collections and do the inital sync” section of the walkthrough.You mirror accesses the calendar saved to a file on your mirror.
-
@Beh error for discover
Traceback (most recent call last):
File “/usr/bin/vdirsyncer”, line 7, in
from vdirsyncer.cli import main
ImportError: No module named ‘vdirsyncer’ -
@Doubleve Did you change the first line of the file to
#!/usr/bin/python3? -
everything is good
