Camera module

James

Between the above two error codes, there are several similar code with different “PCM surroundNo.” end (21, 40, 41, 50, 51, 71) like:

ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition 'cards.bcm2835.pcm.surround51.0:CARD=0'
ALSA lib conf.c:4259:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4738:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM surround21

alexyak

@James thank you for reporting the bugs. I will try to fix them soon.

The code doesn’t save the photo into the file. The image data base64 encoded is passed from the camera module to the node_helper. I could add this, but am I afraid of filling up the space on the RPI.

Which provider did you configure the nodemailer with?

James

@alexyak Hotmail. And one thing I need to confirm with you is that “email & password” are filled in between “‘’” or “<>”?

James

@alexyak bug report:

pm2 won’t restart MM after a reboot and press Alt+F4 for the first time. (This occurs randomly, I tested for several times even if not the first time to press Alt+F4 after a reboot)
I need to run “pm2 restart mm” to get MM restart again.
After this sometimes the modules not work. I’m not sure which one is. camera or voicecontrol? Errors ouputs as follows:

Expression 'r' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2097
Expression 'PaAlsaStreamComponent_FinishConfigure( &self->capture, hwParamsCapture, inParams, self->primeBuffers, realSr, inputLatency )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2731
Expression 'PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 2843
Traceback (most recent call last):
  File "./modules/voicecontrol/snowboy/kws-multiple.py", line 34, in <module>
    detector = snowboydecoder.HotwordDetector(models, sensitivity=sensitivity)
  File "/home/pi/MagicMirror/modules/voicecontrol/snowboy/snowboydecoder.py", line 115, in __init__
    stream_callback=audio_callback)
  File "/usr/lib/python2.7/dist-packages/pyaudio.py", line 747, in open
    stream = Stream(self, *args, **kwargs)
  File "/usr/lib/python2.7/dist-packages/pyaudio.py", line 442, in __init__
    self._stream = pa.open(**arguments)
IOError: [Errno Unanticipated host error] -9999

Finally, I received Selfie, that the email & passward need to be filled in without “<>”. You may change the sample config code in the readme.md as well :)

Thanks,

James

cowboysdude

That’s pretty cool! Great job!

jeremytripp

Tested the voice control + camera module today and got both working. Thanks @James for the tip on the missing config curly brackets. Was starting to drive me crazy as no JS Linters were picking it up.

For future reference, the voice control module now comes pre-packaged with the three camera commands by default in the voicecontrol.js file, so in your config.js file, you only need to add:

{
    module: 'voicecontrol',
    position: 'bottom_left'			
},

In fact, if you do add the config: definitions and any keywords to your config.js file, it actually overrides the three default camera commands. With that said, is it best practice to add additional keyword commands to voicecontrol.js OR to remove the defaults from voicecontrol.js and place everything in config.js?

I also get the ALSA lib error messages in Terminal after quitting the mirror, as well as the countdown bug James mentions after taking a picture, but everything seems to work and I DID receive the email no problem (using Gmail, after following @alexyak’s instructions on “Allowing Less Secure Apps” and “Allowing Access To Your Gmail Account”).

All in all, awesome work, Alex! Thrilled to now have 3 of your modules running on my mirror as I’m running motion sensor too!

jeremytripp

Follow up: I tried both configurations and it only works when all voice command keywords are in voicecontrol.js, so that answers my question, I suppose!

thereisnotry87

@jeremytripp First of all thanks to post your experience, it was very self-explanatory. So…did you get these kind of ALSA lib error messages?

*ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave*

*ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side*

*ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi*

*ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline*

*ALSA lib pulse.c:243:(pulse_connect) PulseAudio: Unable to connect: Connection refused*

*ALSA lib pulse.c:243:(pulse_connect) PulseAudio: Unable to connect: Connection refused*

*ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave*

*Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel*

*jack server is not running or cannot be started*

I’ve already seen that @James got similar errors but at least for him it worked (video display top centred and taking pictures). In my case nothing happens when I send the voice command.

Any suggestions? I love the support of this community.

thereisnotry87

Mmm first it would be nice to check if the microphone is recording…anyway can anyone suggest me an IDE at least to make a good code debugging? Because I’m currently working with a text editor on Rasp pi.

vageesh79

@James Hi Can you please tell how you get the ps camera working on your pi. I have been doing that but i cannot get it to work.

daenick

@alexyak same problem here:

initializing nodemailer
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline
ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline
ALSA lib pulse.c:243:(pulse_connect) PulseAudio: Unable to connect: Connection refused

ALSA lib pulse.c:243:(pulse_connect) PulseAudio: Unable to connect: Connection refused

ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
jack server is not running or cannot be started

The system recognizes the words to show and exit. But he does not recognize the word Selfie, or do anything.

sberniz

Hi everyone, i just tried magic mirror on pi zero w, works great, i’m using it with midori browser./ server only. camera module is loaded, but i can’t see it on the screen. does anyone know how to do it? thanks

wireshark

This post is deleted!

VerdianChua

Hi, I have installed the camera on my Magic Mirror without any problem and I am now able to display what is shown on my camera. But the problem that I am facing right now is the voice control module. So according to @alexyak I have to generate the audio from snowboy.kitt.ai

But I am unable to download the file that I wanted, So I was wondering what could gone wrong. And let’s say if I am able to download the file, how do I apply it on my voice control module?

I hope that someone is able to assist me as soon as possible. Thanks in advance

richland007

Does anyone know how to use 2 USB microphones on 1 Raspberry Pi to control 2 separate modules one for AlexaPi outside MagicMirror that i have working right now and works fine and the other for a voice control module for MagicMirror to just turn on and off MM modules.??
Meaning how can you assign a USB id of one mic to one module and the other usb id of the other mic to the other module so they can both be listening at the same time for their own hotwords without having resource conflict??
Thank you

sepal22

This post is deleted!