MMM-Domiticz

[Charley]

@Peter there are no stupid questions

You should make the changes in the MagicMirror config.js file, if you make them in the MMM-Domoticz.js they will be gone in the next updates.

In the MMM-Domoticz.js that are the default values if you don’t put it in the MM config.js file the value from the module will be used.

Good luck

[Peter]

Sorry, Charley, I deleted Domoticz folder, installed again and now I have a problem:

How can I solve this?
Peter

[Charley]

@peter
I am sorry this happend. i flip the screen if you have the app on the left side. the L should point the otherway as well. I try to fix it on monday or tuesday. However is quick fix is putting the module op the right side in the config

[Peter]

@Charley thanks.
I will wait for the fix!
No hurry.
Peter

[Charley]

@Peter made an update this morning.

The grouping must be set now and is not a default.
If you like the same sensor with different values grouped add

groupSensors: true

To config.js for the module and the sensors will be grouped. However if the module is placed on a left position the hook └─ (right) ─┘(left) sometimes shows unexpected behavior.

[Charley]

To make the Domoticz System better I have made a WiFi Thermometer that is extremely precise. It is based on an infrared Non-touch sensor module. If you want to control devices this may be a good solution.
Available on gitHub WiFi highly precise thermometer

[DavA]

I cant see anything but temperature? No status on switches ON or OFF.
Also is it possible to not show all my temperature-sensors?

Thanks

[Charley]

It shows only devices at are switched on.

[Smotx]

Hi,

Thx for this module.

How to exclude Xiaomi doors sensors ?

Thx for help.

[Charley]

Today added support for p1 Smart meters

first update your module

cd MagicMirror/modules/MMM-Domoticz
git pull
pm2 restart MagicMirror

Add these 2 lines to the config file

smartMeter:  true,
smartMeterOffset: 0  

You may need a commy behind the 0 from smartMeterOffset
The offset you use if the meter wasn’t zero when you moved in or if you want to show total per year of month

[Charley]

@Smotx

excluding can be done by adding the device names in the excludeDevices array in your config.js file

[Awn]

Hi,

First of all, thank you for the hard work on those modules.

I’m nex to the MM world, and in the linux world in global, and it seems that I won’t be able to make it without your help.
The module shows “Loading Domoticz data…” and seems to never get them…

My config.js contains this :

 {
                        module: "MMM-Domoticz",
                        position: "bottom_right", 
                        config:
                                {
                                updateInterval: 20,
                                apiBase: "https://192.168.**.***",
                                apiPort: 443,
                                apiUser: "**********",
                                apiPw: "*********",
                                moduleTitle: "Domoticz",
                                temperatureTitle: "Températures dans la maison",
                                subMenus: true,
                                showItems: ['temperature', 'humidity'],
                                textWhite: false,
                                groupSensors: true,
                                }
                },

Sadly, it seems that the pi running the MM isn’t getting an answer from the pi running Domoticz.

I tried the url access from my browser:
https://192.168..*/json.htm?type=devices&filter=all&used=true&order=Name

I obtain a return with the different systems connected (RFXCom, Zwave, hue…)

Can somebody guide me throught this please?

Thanx !

Regards,
Awn

[Pl4nk]

This post is deleted!

[sdetweil]

@Awn on the magicmirror, using the keyboard, open the developers window, ctrl-shift-i,
select the tab labeled console, on the window that opens, scroll up to see any errors

u may also have to look in the terminal window log for errors from the node_helper

these will be in the pm2 logs if using pm2.

do

pm2 logs --lines=100 

[Jo-Rien]

I am not getting a neat list with this module, all readings from my temperature meters is shown on two lines and it’s kinda messing up the screen. Any idea what the problem is?

[ToniNappi]

Is it possible also exclude sensors from the displayed data? I have about 50 temp sensors and obviously I want only see the most important ones. I tried to put them in exlude list, but it doesn’t seem to work. Nice module still!

Toni

[najtram]

Hi, there.

Great module!
It’s passing the described data perfectly except one of my top desired data.

I’d really love to see “CounterToday” and “Data” from my Enphase Envoy.
Since this is a kWh subtype it looks like I’m really close, but somehow I only see my P1 data.

  {
     "AddjMulti" : 1.0,
     "AddjMulti2" : 1.0,
     "AddjValue" : 0.0,
     "AddjValue2" : 0.0,
     "BatteryLevel" : 255,
     "CounterToday" : "0.117 kWh",
     "CustomImage" : 0,
     "Data" : "486.173 kWh",
     "Description" : "",
     "Favorite" : 0,
     "HardwareID" : 9,
     "HardwareName" : "Enphase Envoy",
     "HardwareType" : "Enphase Envoy with LAN (HTTP) interface",
     "HardwareTypeVal" : 108,
     "HaveTimeout" : false,
     "ID" : "00000901",
     "LastUpdate" : "2020-09-13 08:31:50",
     "Name" : "Enphase kWh Production",
     "Notifications" : "false",
     "Options" : "",
     "PlanID" : "0",
     "PlanIDs" : [ 0 ],
     "Protected" : false,
     "ShowNotifications" : true,
     "SignalLevel" : "-",
     "SubType" : "kWh",
     "SwitchTypeVal" : 0,
     "Timers" : "false",
     "Type" : "General",
     "TypeImg" : "current",
     "Unit" : 1,
     "Usage" : "280 Watt",
     "Used" : 1,
     "XOffset" : "0",
     "YOffset" : "0",
     "idx" : "748"
  },

[Sp0nsje]

Hi thanks for the great work,

Is there a better guide on how to implement certain sensors ?
like an ‘‘IDX xx’’ value or something

{
                        module: "MMM-Domoticz",
                        position: "bottom_right",   // see mirror setting for options
                        config: {
                                updateInterval: 5, // every 45 seconds
                                apiBase: "192.168.178.44",
                                apiPort: 18080,
                                apiUser: "MagicMirror",
                                apiPw: "MagicMirror",
                                moduleTitle: "My smart home by Domoticz",
                                energyTitle: "Energy used by",
                                batteryTitle: "Battery level",
                                coTitle: "CO2 level",
                                blindsTitle: "Blinds",
                                energyNow: "Currently using",
                                energyTotal: "Energy used",
                                energyToday: "Energy used today",
                                batteryThreshold: 20,
                                coThreshold: 650,
                                subMenus: true,
                                smartMeter: false,
                                smartMeterOffset: 0,
                                showItems: ['temperature'], //,'energy','battery','co','blinds','humidity','baro','usage','voltage','alarm','sensor','pulse','meter','rain'],
                                excludeDevices: ['none','include your own'],  // Device that will not be shown
                                onlyShowExcluded: false, // if true only exluded devices are shown
                                textWhite: true,
                                alarmOffLabel: "Disabled",
                                groupSensors: false,
                        }
                },

i can only show the temperatures when i select al the data it wil hang on Loading Domoticz Data…

would appriciate different screenshots of codes / layouts on the MM2

[Mazzokun]

I think there is something broken into code or there is some dependence-package with raspberryOs…
In Domoticz I have 30+ devices and In MM shows only a meter device with 0,0,0 values ( I have 3 meter device, no possible value)…
If I try open the json url into chromium it says error 401 forbidden, but if I try the same url into Mac safari it simple works.
Any Idea?

[MisterT]

Hi @Mazzokun
I had a problem with this module and with the help of @sdetweil a New code is available here. It works with domoticz password

[link text] https://forum.magicmirror.builders/topic/11123/mmm-domoticz-cannot-read-property-0-of-undefined/13?page=2
(link url)

Enjoy