So ... to update MagicMirror I would ... ??

chef

cd into the magicmirror folder and run:

sudo apt-get update

or

sudo apt-get upgrade

do I then have to run npm install???

Thanks for the help

chef

NoNameRo

@chef

If you want to update your MagicMirror² to the latest version, use your terminal to go to your Magic Mirror folder and type the following command:

git pull && npm install

If you changed nothing more than the config or the modules, this should work without any problems. Type git status to see your changes, if there are any, you can reset them with git reset --hard. After that, git pull should be possible.

Richard238

I’ve just applied the latest update and get a blank, black screen.

If I kill electron, I get back to the Pi desktop, until electron auto restarts.

Any advice on how to get MM back again, please?

Thanks!

Charley

Also my MagicMirror is a blank screen. Will not start again

chef

many thanks

Montanaro

Same issue, i´ve updated and got a black screen.

Richard238

PIR disabled in config (as a precaution, elimination)
Pi shutdown, powered off, and restarted.
MM Still blank on Pi.
MM OK on a LAN PC, via :8080

Logs:

pi@raspberrypi:~ $ pm2 log mm
[TAILING] Tailing last 15 lines for [mm] process (change the value with --lines option)
/home/pi/.pm2/logs/mm-error-0.log last 15 lines:
0|mm       |     at exports._exceptionWithHostPort (util.js:1047:20)
0|mm       |     at Server.setupListenHandle [as _listen2] (net.js:1319:14)
0|mm       |     at listenInCluster (net.js:1367:12)
0|mm       |     at doListen (net.js:1493:7)
0|mm       |     at _combinedTickCallback (internal/process/next_tick.js:141:11)
0|mm       |     at process._tickCallback (internal/process/next_tick.js:180:9)
0|mm       |     at Function.Module.runMain (module.js:607:11)
0|mm       |     at startup (bootstrap_node.js:167:16)
0|mm       |     at bootstrap_node.js:589:3
0|mm       |   code: 'EADDRINUSE',
0|mm       |   errno: 'EADDRINUSE',
0|mm       |   syscall: 'listen',
0|mm       |   address: '0.0.0.0',
0|mm       |   port: 8080 }
0|mm       | [1745:0401/150319.460996:FATAL:bus.cc(1189)] D-Bus connection was disconnected. Aborting.

/home/pi/.pm2/logs/mm-out-0.log last 15 lines:
0|mm       | You're using a full whitelist configuration to allow for all IPs
0|mm       | Server started ...
0|mm       | Connecting socket for: MMM-MyTemps
0|mm       | Starting module helper: MMM-MyTemps
0|mm       | Connecting socket for: updatenotification
0|mm       | Connecting socket for: calendar
0|mm       | Starting node helper for: calendar
0|mm       | Connecting socket for: newsfeed
0|mm       | Starting module: newsfeed
0|mm       | Sockets connected & modules started ...
0|mm       | Launching application.
0|mm       | Create new calendar fetcher for url: https://calendar.google.com/calendar/ical/[###################] Interval: 300000
0|mm       | Create new calendar fetcher for url: https://calendar.google.com/calendar/ical/[##############}/basic.ics - Interval: 300000
0|mm       | Create new news fetcher for url: http://feeds.reuters.com/reuters/UKTopNews - Interval: 120000
0|mm       | Create new news fetcher for url: http://feeds.skynews.com/feeds/rss/world.xml - Interval: 120000

Harry

Yep. I see I’m not the only one with a blank screen…
I did the git pull && npm install. It went through with only two warnings. Then after pm2 restart mm.sh I got the blank screen. I see that there is an npm-debug.log that contains some errors:

14 verbose stack Error: magicmirror@2.3.0 start: sh run-start.sh
14 verbose stack Exit status 1
14 verbose stack at EventEmitter. (/usr/lib/node_modules/npm/lib/utils/lifecycle.js:255:16)
14 verbose stack at emitTwo (events.js:106:13)
14 verbose stack at EventEmitter.emit (events.js:191:7)
14 verbose stack at ChildProcess. (/usr/lib/node_modules/npm/lib/utils/spawn.js:40:14)
14 verbose stack at emitTwo (events.js:106:13)
14 verbose stack at ChildProcess.emit (events.js:191:7)
14 verbose stack at maybeClose (internal/child_process.js:920:16)
14 verbose stack at Process.ChildProcess._handle.onexit (internal/child_process.js:230:5)
15 verbose pkgid magicmirror@2.3.0
16 verbose cwd /home/pi/MagicMirror
17 error Linux 4.4.43-v7+
18 error argv “/usr/bin/node” “/usr/bin/npm” “start”
19 error node v6.12.3
20 error npm v3.10.10
21 error code ELIFECYCLE
22 error magicmirror@2.3.0 start: sh run-start.sh
22 error Exit status 1
23 error Failed at the magicmirror@2.3.0 start script ‘sh run-start.sh’.

Any help would be appreciated.
Harry

Charley

I returned from a copied img from my sd card to an older version and only did

git pull

didn’t do the

npm install

at least now it works again

chef

strange I’m not seeing a black screen.

Perhaps an issue with the auto start script? But I’m unsure.

Electron was updated in this release as well.