So ... to update MagicMirror I would ... ??

Charley · Apr 1, 2018, 2:21 PM

Also my MagicMirror is a blank screen. Will not start again

chef · Apr 1, 2018, 2:21 PM

many thanks ;)

Montanaro · Apr 1, 2018, 2:37 PM

Same issue, i´ve updated and got a black screen.

Richard238 · Apr 1, 2018, 2:46 PM

PIR disabled in config (as a precaution, elimination)
Pi shutdown, powered off, and restarted.
MM Still blank on Pi.
MM OK on a LAN PC, via :8080

Logs:

pi@raspberrypi:~ $ pm2 log mm
[TAILING] Tailing last 15 lines for [mm] process (change the value with --lines option)
/home/pi/.pm2/logs/mm-error-0.log last 15 lines:
0|mm       |     at exports._exceptionWithHostPort (util.js:1047:20)
0|mm       |     at Server.setupListenHandle [as _listen2] (net.js:1319:14)
0|mm       |     at listenInCluster (net.js:1367:12)
0|mm       |     at doListen (net.js:1493:7)
0|mm       |     at _combinedTickCallback (internal/process/next_tick.js:141:11)
0|mm       |     at process._tickCallback (internal/process/next_tick.js:180:9)
0|mm       |     at Function.Module.runMain (module.js:607:11)
0|mm       |     at startup (bootstrap_node.js:167:16)
0|mm       |     at bootstrap_node.js:589:3
0|mm       |   code: 'EADDRINUSE',
0|mm       |   errno: 'EADDRINUSE',
0|mm       |   syscall: 'listen',
0|mm       |   address: '0.0.0.0',
0|mm       |   port: 8080 }
0|mm       | [1745:0401/150319.460996:FATAL:bus.cc(1189)] D-Bus connection was disconnected. Aborting.

/home/pi/.pm2/logs/mm-out-0.log last 15 lines:
0|mm       | You're using a full whitelist configuration to allow for all IPs
0|mm       | Server started ...
0|mm       | Connecting socket for: MMM-MyTemps
0|mm       | Starting module helper: MMM-MyTemps
0|mm       | Connecting socket for: updatenotification
0|mm       | Connecting socket for: calendar
0|mm       | Starting node helper for: calendar
0|mm       | Connecting socket for: newsfeed
0|mm       | Starting module: newsfeed
0|mm       | Sockets connected & modules started ...
0|mm       | Launching application.
0|mm       | Create new calendar fetcher for url: https://calendar.google.com/calendar/ical/[###################] Interval: 300000
0|mm       | Create new calendar fetcher for url: https://calendar.google.com/calendar/ical/[##############}/basic.ics - Interval: 300000
0|mm       | Create new news fetcher for url: http://feeds.reuters.com/reuters/UKTopNews - Interval: 120000
0|mm       | Create new news fetcher for url: http://feeds.skynews.com/feeds/rss/world.xml - Interval: 120000

Harry · Apr 1, 2018, 2:49 PM

Yep. I see I’m not the only one with a blank screen…
I did the git pull && npm install. It went through with only two warnings. Then after pm2 restart mm.sh I got the blank screen. I see that there is an npm-debug.log that contains some errors:

14 verbose stack Error: magicmirror@2.3.0 start: sh run-start.sh
14 verbose stack Exit status 1
14 verbose stack at EventEmitter. (/usr/lib/node_modules/npm/lib/utils/lifecycle.js:255:16)
14 verbose stack at emitTwo (events.js:106:13)
14 verbose stack at EventEmitter.emit (events.js:191:7)
14 verbose stack at ChildProcess. (/usr/lib/node_modules/npm/lib/utils/spawn.js:40:14)
14 verbose stack at emitTwo (events.js:106:13)
14 verbose stack at ChildProcess.emit (events.js:191:7)
14 verbose stack at maybeClose (internal/child_process.js:920:16)
14 verbose stack at Process.ChildProcess._handle.onexit (internal/child_process.js:230:5)
15 verbose pkgid magicmirror@2.3.0
16 verbose cwd /home/pi/MagicMirror
17 error Linux 4.4.43-v7+
18 error argv “/usr/bin/node” “/usr/bin/npm” “start”
19 error node v6.12.3
20 error npm v3.10.10
21 error code ELIFECYCLE
22 error magicmirror@2.3.0 start: sh run-start.sh
22 error Exit status 1
23 error Failed at the magicmirror@2.3.0 start script ‘sh run-start.sh’.

Any help would be appreciated.
Harry

Charley · Apr 1, 2018, 2:56 PM

I returned from a copied img from my sd card to an older version and only did

git pull

didn’t do the

npm install

at least now it works again

chef · Apr 1, 2018, 3:28 PM

strange I’m not seeing a black screen.

Perhaps an issue with the auto start script? But I’m unsure.

Electron was updated in this release as well.

MichMich · Apr 1, 2018, 3:34 PM

In most cases it’s because the port is still in use. First thing to try if it fails to start after an update: reboot the pi.

Richard238 · Apr 1, 2018, 3:45 PM

Power off & on restores VNC, and LAN access displaying MM. (Hurrah!).

Pi. Electron window is black, but shows cursor.

Cyberwrights · Apr 1, 2018, 3:48 PM

One more for blank screen, no joy after update per the instructions. Restarted MM using pm2, then rebooted the Pi. Ran the git reset --hard command, still nothing.