Read the statement by Michael Teeuw here.
Can't rotate touchinterface to portrait mode HELP!!!
-
Anyone know if its possible to get the screen (42") to run in portrait mode “with” touch (USB) functionality? The display and touch work great in landscape mode, but I cannot get it to work in portrait.
Adding the following in the config.txt seem to have no effect on touch:
display_rotate=3
or
lcd_rotate=3
However, lcd_rotate=3 does rotate screen but no luck on touch interface
I’m running the latest MM2 v2.3.1 config, on a Raspberry Pi 3.
Please help!!
-
For Real??
Nobody can help me?
-
@M1K3rSz give xinput_calibrator a try : https://www.raspberrypi.org/forums/viewtopic.php?t=78805
Other than that I can not help you.
-
I want to re-up this case as in my opinion this was never solved. I am using the new GL driver and now facing the same issue as the initial poster.
How do you rotate the touch interface. Its a iyama screen with build in touch
-
@gverbist Try rotating the content of the webpage instead of rotating the entire screen.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login