Read the statement by Michael Teeuw here.
MMM-voice setup but MagicMirror wont display
-
@cyberphox wow that was a fast response! thank you
ok, removed the … MM now works but shows a microphone and says error.
What have I done wrong? -
I have my mic plugged into a USB sound card on my pi. Is that ok, or should I plug it directly into the audio of the pi? My mic is not a USB connection.
-
Run this from terminal
cat /proc/asound/cards
and see if your microphone is listed as : 1
-
@cyberphox said in MMM-voice setup but MagicMirror wont display:
cat /proc/asound/cards
this is the response:
pi@raspberrypi:~ $ cat /proc/asound/cards
0 [ALSA ]: bcm2835_alsa - bcm2835 ALSA
bcm2835 ALSA
pi@raspberrypi:~ $ -
@cyberphox said in MMM-voice setup but MagicMirror wont display:
cat /proc/asound/cards
the one above I took the USB sound card out and plugged the mic directly to the pi.
this one I did your command again with the sound card in the USB slot and mic connected to USB sound card:
pi@raspberrypi:~ $ cat /proc/asound/cards
0 [ALSA ]: bcm2835_alsa - bcm2835 ALSA
bcm2835 ALSA
1 [Device ]: USB-Audio - USB Audio Device
GeneralPlus USB Audio Device at usb-3f980000.usb-1.3, full speed -
I have gone onto the pi itself and chossen the usb as an audio device with clicking microphone and microphone capture… but still shows the “error” in MM display.
-
and you ran the dependencies script from the installers folder?
-
mine was error cause i accidentally cloned into MMM-Voice…capital V and it didnt create the dic file…
maybe try running npm start dev and see what errors you have in the console -
@cyberphox yes, that I def did -was super careful with that.
-
@cyberphox heres what I get with the npm start dev…not sure I am doing this in the right dir. I checked the Capital V or v, and mine is def lowercase v
pi@raspberrypi:~/MagicMirror/modules/MMM-voice $ npm start dev
npm ERR! missing script: startnpm ERR! A complete log of this run can be found in:
npm ERR! /home/pi/.npm/_logs/2018-04-07T15_24_32_070Z-debug.log
