MMM-PIR-Sensor tuning

shgmongohh

It done. I can tune my PIR-Sensor.
Here is a usefull Link.

open_book

Hi, I’very been through a lot of the posts on the White Screen issue, and on this thread. I’m close… I can feel it, but I’ve an uncaught exception that I don’t understand.

[TAILING] Tailing last 10 lines for [mm] process (change the value with --lines option)
/home/pi/.pm2/logs/mm-error-0.log last 10 lines:
0|mm | at /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_helper.js:65:18
0|mm | at /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/onoff/onoff.js:27:5
0|mm | at Array.forEach (native)
0|mm | at Gpio.pollerEventHandler (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/onoff/onoff.js:26:13)
0|mm | TypeError: Cannot read property ‘writeSync’ of undefined
0|mm | at Class.activateMonitor (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_helper.js:21:17)
0|mm | at /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_helper.js:59:18
0|mm | at /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/onoff/onoff.js:27:5
0|mm | at Array.forEach (native)
0|mm | at Gpio.pollerEventHandler (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/onoff/onoff.js:26:13)

link to screengrab.

Anyone offer any tips as to what might be causing this?

I’m on a Pi3 Model B v2.
Have only installed the standard mirror module, and the MMM-PIR module. The mirror is working fine and the PIR module is loading, but the screen isn’t switching off.

jc21

@open_book Few things,

What version of Raspbian are you using? The onoffnpm module has issues with some releases.
Hint: cat /etc/os-release
What does your config look like for the pir module, exactly?

open_book

@jc21
1.
PRETTY_NAME=“Raspbian GNU/Linux 8 (jessie)”
NAME=“Raspbian GNU/Linux”
VERSION_ID=“8”
VERSION=“8 (jessie)”
ID=raspbian
ID_LIKE=debian

              {
		module: 'MMM-PIR-Sensor',
		config: {
			sensorPIN: 3,
			powerSaving: true,
			}
		},

jc21

@open_book Very strange, it seems the module is trying to activate/deactive the monitor using the Relay, but you haven’t specified a relay to use.

I have noticed however, that sensorPIN of 3 shouldn’t work. This variable is incorrectly named, it is not actually the pin number of the header, but the GPIO number instead. Refer to this Pi 3 image showing which “pins” correspond to “gpio” numbers. You should be using one of 4, 5, 6, 12, 13, 18, 22, 23, 24, 25, 26 or 27.

For example, a sensorPIN of 4 would require the PIR io cable plugged in to pin header 7.

open_book

@jc21 hi again, thanks for your input so far.

I’ve had the sensorPIN at 22 previously. And tested it using the python script shared on a few other threads:

´´´python
from gpiozero import MotionSensor
import os

pir= MotionSensor(22)
while True:
if pir.wait_for_motion(timeout=10*60):
print(“It lives”)
else:
os.system(“/opt/vc/bin/tvservice -0”)
´´´
The result spammed “It lives”. Which I understand to mean that the sensor is working… If I change the if to “os.system(”/opt/vc/bin/tvservice -p")" the screen shutsdown.

The reason I changed it was based on the results of “gpio readall”. I currently have power in pin 1 (3.3v), ground in pin 6 and data in pin 15

gpio readall tells me that physical 15 = BCM 22 = GPIO 3 so I decided to try sensorPin: 3.

I’ve changed it back to 22 now, but the result is still the same.

Other possible vectors are:

I’m forcing HDMI output because I’m using a HDMI -> DVI converter and so it seemed like a safe choice.

With dev tools open I can see that USER_PRESENCE is not being logged anywhere in the console.

I followed this post and ran:

“Run npm rebuild --runtime=electron --target=1.3.4 --disturl=https://atom.io/download/atom-shell --abi=49”
in the MMM-PIR-Sensor folder,

jc21

Sounds like you’re on top of that then.

Just fyi, the latest code for the original pir sensor module will rebuild the compiled dependencies for you as part of the npm install command in the module. There should be no reason to run npm rebuild manually unless you get those pesky “expected version xx but got xx” errors.

open_book

@jc21 just for closure here I found the issue. After running the python script again I realised that the PIR was always HIGH even with the sensitivty dialled right down.

So I checked the leads going into the pi and found that, despite checking it many times, I’d mixed up GND and VCC :(

The lesson for any other idiots out there when testing is, run this Python script and make sure that the PIR stops broadcasting “Motion Detected!” when you cover it with something:

from gpiozero import MotionSensor
import os

pir= MotionSensor(22) //the gpio pin PIR OUT is connected to
while True:
               if pir.motion_detected:
               print (“Motion Detected!”)

Code from this site

With some further adjustments for sensitivity it’s now working great!

jc21

Great stuff. People shouldn’t discount a faulty PIR either. The one I had on the shelf for ages wasn’t detecting quite right so I ordered another one and the difference in detection is huge. I’m not sure if these have a shelf life or what but yeah, that was my recent experience.

ostfilinchen

Hi all,

i have an issue with the PIR Sensor. I get alltime this error:

1|mm | at bindings (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bindings/bindings.js:76:44)
1|mm | (node:1714) DeprecationWarning: sys is deprecated. Use util instead.
1|mm | WARNING! Could not load config file. Starting with default configuration. Error found: Error: Module version mismatch. Expected 50, got 49.
1|mm | App threw an error during load
1|mm | Error: Module version mismatch. Expected 50, got 49.
1|mm | at Error (native)
1|mm | at process.module.(anonymous function) [as dlopen] (ELECTRON_ASAR.js:173:20)
1|mm | at Object.Module._extensions…node (module.js:583:18)
1|mm | at Object.module.(anonymous function) [as .node] (ELECTRON_ASAR.js:173:20)
1|mm | at Module.load (module.js:473:32)
1|mm | at tryModuleLoad (module.js:432:12)
1|mm | at Function.Module._load (module.js:424:3)
1|mm | at Module.require (module.js:483:17)
1|mm | at require (internal/module.js:20:19)
1|mm | at bindings (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bindings/bindings.js:76:44)
1|mm | Error: Module version mismatch. Expected 50, got 49.
1|mm | at Error (native)
1|mm | at process.module.(anonymous function) [as dlopen] (ELECTRON_ASAR.js:173:20)
1|mm | at Object.Module._extensions…node (module.js:583:18)
1|mm | at Object.module.(anonymous function) [as .node] (ELECTRON_ASAR.js:173:20)
1|mm | at Module.load (module.js:473:32)
1|mm | at tryModuleLoad (module.js:432:12)
1|mm | at Function.Module._load (module.js:424:3)
1|mm | at Module.require (module.js:483:17)
1|mm | at require (internal/module.js:20:19)
1|mm | at bindings (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bindings/bindings.js:76:44)

It’s equal if i have the original from @paviro or the modification.

Can anybody help me?

Regards Daniel