MMM-Page-Selector: A page switcher that can set positions of modules

Veldrovive

@Brandenborg
This is not a default function of this module. However, if you can edit a small amount of code, it should be easy to implement.
Just copy these lines of code right after line 235 of MMM-Page-Selector.js. This lines should be selectPage(payload);

clearTimeout(self.default_timeout);
if(![0, this.config.defaultPage].includes(payload)){
    self.default_timeout = setTimeout(() => {
        selectPage(this.config.defaultPage);
    }, TIME)
}

Then just replace TIME with the number of milliseconds you want to remain on the page before it automatically switches back to default. You may also have to change the 0 in the if statement if your default page isn’t at the 0th position.

Brandenborg

@Veldrovive thanks a lot. I should manage that.
I recon the 0 position is the first page I define the contents of?

Veldrovive

@Brandenborg
The 0 should be the position of your default page in the page list. The furthest left is 0.

Brandenborg

@Veldrovive
Thanks. And thank you for a really useful module!

Veldrovive

@Brandenborg
The latest version of this module now has this as a (Not very well tested) feature.
You can now specify a restoreDefault prop in the MMM-Page-Selector config with the number of seconds you want before it returns to the default page.

m1scha

Hi first of all thanks for this great module, Works great. I wanto to remotely change the pages which works with this commands:

http://ip:8080/remote?action=NOTIFICATION&notification=PAGE_DOWN
http://ip:8080/remote?action=NOTIFICATION&notification=PAGE_UP

But if I want to go to a specific page it does noct work with this command:

http://ip:8080/remote?action=NOTIFICATION&notification="SELECT_PAGE"&payload="0"

Can somebody tell me whats wrong?

Veldrovive

@m1scha
Hello, glad you’re enjoying the module.

I am assuming that your page has some name that is not "0".

I haven’t extensively tested with magic mirror remote, but I imagine the issue is with setting payload to be a string. When it gets a string, MMM-Page-Selector assumes it is the name of the page, not a page index. If an integer is sent, it assumes it is a page index.

I don’t know how remote works, but you might be able to use
http://ip:8080/remote?action=NOTIFICATION&notification=“SELECT_PAGE”&payload=0

Or you could specify your page name as
http://ip:8080/remote?action=NOTIFICATION&notification=“SELECT_PAGE”&payload=“YOUR_PAGE_NAME”

m1scha

@veldrovive said in MMM-Page-Selector: A page switcher that can set positions of modules:

remote?action=NOTIFICATION&notification=“SELECT_PAGE”&payload=0

Hi, thanks for you reply.
I tested this in several variations, but I get a sucess Message, but change of page.

Veldrovive

@m1scha
I checked out MMM-Remote-Control and it is just a problem with string representations.

remote?action=NOTIFICATION&notification=“SELECT_PAGE”&payload=0 sends the literal notification “SELECT_PAGE” including the quotes. A more correct request would be remote?action=NOTIFICATION&notification=SELECT_PAGE&payload=Main which would switch the the page called main.

However, in order to support other modules, pages are 1 indexed by notification so to switch to the first page, you would send remote?action=NOTIFICATION&notification=SELECT_PAGE&payload=1

Strings that are numbers are handled correctly by MMM-Page-Selector.

innovation

@veldrovive Hello! I want to use this module for

An intro screen - only for 10 secs
Move into screen 2 - stay there

Can I only have one screen to have a time interval and the other doesn’t? If so how?

Riaanh

Good day @Veldrovive thanks for the brilliant work you have done on this, and your comments on this is really helpful.

I have an issue to get this going, and been researching and trying for the past two days with no success. I even tried using some of the users on this thread’s config as posted here, and loaded the modules they refer to, but I always end up with a blank page once I load the portion for MMM-Page-Selector.

As soon as I add this portion below, it only display a blank page, or if I comment it out, then the page will display again.

{
			disabled: false,
		        module: "MMM-Page-Selector",
		        position: "top_bar",
		        config: {
			        defaultPage: "Page1",
		                displayTitle: true,
			        selectPageNotif: ["SELECT_PAGE"],
		                incrementPageNotif: ["PAGE_UP"],
		                decrementPageNotif: ["PAGE_DOWN"],
   			     }
		},

Any advice or even just guidance on where to look further would be greatly appreciated.

sdetweil

@Riaanh said in MMM-Page-Selector: A page switcher that can set positions of modules:

MMM-Page-Selector

can u show the messages from where u start MagicMirror

either npm start
or pm2

if using pm2,. then
pm2 logs --lines=100
will show the messages

blank screen is usually a missing library , see
https://forum.magicmirror.builders/topic/15778/fix-for-black-screen-in-2-16-and-later

Riaanh

@sdetweil said in MMM-Page-Selector: A page switcher that can set positions of modules:

can u show the messages from where u start MagicMirror

0 verbose cli [ '/usr/bin/node', '/usr/bin/npm', 'start' ]
1 info using npm@7.5.2
2 info using node@v12.22.5
3 timing config:load:defaults Completed in 4ms
4 timing config:load:file:/usr/share/nodejs/npm/npmrc Completed in 7ms
5 timing config:load:builtin Completed in 8ms
6 timing config:load:cli Completed in 4ms
7 timing config:load:env Completed in 1ms
8 timing config:load:file:/home/pi/magicmirror/mounts/modules/.npmrc Completed in 1ms
9 timing config:load:project Completed in 3ms
10 timing config:load:file:/home/pi/.npmrc Completed in 0ms
11 timing config:load:user Completed in 0ms
12 timing config:load:file:/etc/npmrc Completed in 0ms
13 timing config:load:global Completed in 0ms
14 timing config:load:cafile Completed in 1ms
15 timing config:load:validate Completed in 1ms
16 timing config:load:setUserAgent Completed in 2ms
17 timing config:load:setEnvs Completed in 2ms
18 timing config:load Completed in 29ms
19 verbose npm-session 72db9025016605ec
20 timing npm:load Completed in 58ms
21 timing command:run-script Completed in 45ms
22 timing command:start Completed in 59ms
23 verbose stack Error: missing script: start
23 verbose stack     at runScript (/usr/share/nodejs/npm/lib/run-script.js:54:11)
24 verbose cwd /home/pi/magicmirror/mounts/modules
25 verbose Linux 5.10.92-v7l+
26 verbose argv "/usr/bin/node" "/usr/bin/npm" "start"
27 verbose node v12.22.5
28 verbose npm  v7.5.2
29 error missing script: start
30 verbose exit 1

Thanks for responding, is this what you are referring to?

sdetweil

@Riaanh how do you start MagicMirror normally?

sdetweil

@Riaanh this looks like being started under docker