MMM-AssistantMk2

[citizendevpi]

@sean said in MMM-AssistantMk2 & MMM-GAction:

arecord --device plughw:1,0 -d 5 test.wav

[A Former User]

@citizendevpi said in MMM-AssistantMk2 & MMM-GAction:

arecord --device plughw:1,0 -d 5 test.wav

That works? If so, you can set your config record.device: "plughw:1,0",

[citizendevpi]

@citizendevpi pi@raspberrypi:~ $ arecord -d 5 test.wav
Recording WAVE ‘test.wav’ : Unsigned 8 bit, Rate 8000 Hz, Mono
pi@raspberrypi:~ $ arecord -l)
bash: syntax error near unexpected token )' pi@raspberrypi:~ $ arecord -1 arecord: invalid option -- '1' Try arecord --help’ for more information.
pi@raspberrypi:~ $ arecord --device plughw:1,0 -d 5 test.wav
ALSA lib pcm_hw.c:1713:(_snd_pcm_hw_open) Invalid value for card
arecord: main:788: audio open error: No such file or directory

[A Former User]

@citizendevpi
Ok. forget my previous answer.

arecord -l

It’s l (small L), not 1 (one)

[citizendevpi]

@sean **** List of CAPTURE Hardware Devices ****
card 0: sndrpigooglevoi [snd_rpi_googlevoicehat_soundcar], device 0: Google voiceHAT SoundCard HiFi voicehat-hifi-0 []
Subdevices: 0/1
Subdevice #0: subdevice #0

[A Former User]

@citizendevpi
Your recording device is plughw:0,0. or default. Remember it.

Then try this.

arecord -d 10 test.wav  

Say something. It will be record your voice to test.wav on 10 secs.
Works?

If so, then,

aplay test.wav 

It should play previous recording from arecord. Can you hear anything?

[citizendevpi]

@sean yes barley
but yes

[A Former User]

@citizendevpi
Your Mic and Speaker are both the default. So, Now, show your config to me.

[citizendevpi]

This post is deleted!

[A Former User]

UPDATE

[2.1.0] - 2018.11.14

• Customizable command feature is added. Now you can control your device and MM without other module’s help.
  And notification system of transcriptionHook is changed. New configuration is needed.
• Prepared hook commands. Say these (Or customize them in configuration)
  • hide all : modules on screen will be hidden
  • show all : hidden modules will be shown again
  • reboot yourself : reboot device
  • shutdown yourself : shutdown device
  • go to sleep : LCD power off (you might need to modify /scripts/screenoff.sh)
  • wake up : LCD power on (you might need to modify /scripts/screenon.sh)
• onIdle feature be added. After timer without no query after last query, command will be activated. (By default, after 30min All modules will be hidden.)
• And onActivate feature is added. When you activate Assistant, this command will be executed after timer. (By default, modules hidden by onIdle will be shown again)
• For update from 2.0.0

cd ~/MagicMirror/modules/MMM-AssistantMk2
git pull