Read the statement by Michael Teeuw here.
My IKEA Ribba based 50x50 Mirror
-
Hi Guys,
i nearly finished my mirror.
Shopping List:
Frame 10€?
Mirror 100€
RaspberryPi 2
Wireless Stick 5€
Display Controller and powersupply from ebay ~30€
Display 1280x800 from old notebook 0€
Step Down Regulator from ebay 2€
PIR Sensor from ebay 2€
50cm HDMI cable 3€
some little stuff ~5€I build this mirror on a CLAA154WB05AN display out of a Sony VAIO VGN-FZ31J notebook. Unfortunately it’s a glare display, which is not the brightest, but its working so far. For powering the raspberry i used a step down regulator, which is regulating the 12v input power from the display powersupply to 5v for the rasp.
For the controller switches i drilled some holes in to the frame and extended the switches with m4 plastic screws to reach out of the frame.
Some pics:
Regards
Alex -
looks great :) can you please tell me how thick is your mirror ?
And also the frame itself on ikea page i found it’s 4,5cm but after you put there glass how much real space left ? -
Hi,
the glas is 4mm.
Inside of the ribba frame is a kind of a subframe, which you can see on the seconds picture.
I removed the subframe, inserted the glas and readded the subframe. Glas + Subframe then have the same height as the preinstalled metal clips to fix the backpanel.
-
Thank you :) i mean depth of the frame after mirror is installed
I want to know if everything from my setup will have enough space
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login