YAPi0 Installer Stretch Lite

bdream

No change to before.
I tried already with double-quotes.

Only thing I changed now is executing

cd ~
export ELECTRON_MIRROR="https://npm.taobao.org/mirrors/electron/"

and afterwards

npm install electron-chromedriver@v1.8.0 --arch=armv71

and the result is

sdetweil

@bdream weird…

works here on three different systems…

can u show me the output of
uname -a
and
lsb_release -a

bdream

uname -a

Linux RasPiZeroWH 4.19.66+ #1253 Thu Aug 15 11:37:30 BST 2019 armv6l GNU/Linux

lsb_release -a

No LSB modules are available.
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 10 (buster)
Release:        10
Codename:       buster

sdetweil

@bdream said in YAPi0 Installer Stretch Lite:

cd ~
export ELECTRON_MIRROR=“https://npm.taobao.org/mirrors/electron/”

u need to be in the MagicMirror folder

cd ~/MagicMirror

I get the same error as you in the home folder

every command MagicMirror related MUST be done from the MagicMirror folder (except the install script from the product or forum links)

sdetweil

@sdetweil looks like once its messed up, its messed up, and u have to start over with

npm install --arch=armv71

(from the magicmirror folder)

at least I had to…

bdream

Hi Sam, that was the first attempt I did anyway, starting in MagicMirror folder.
Only last I missed it :frowning_face:
I tried it again in this folder, but result is bad.

I guess it makes no sense working on this.
You said you have running multiple Pi0… let me try another one.

Not starting with wrong way let me ask if my understanding is right.

It dosn’t matter if I run SSH or direkt with keyboard attached. Also changing for the different steps?
preperation as shown are done

sudo apt-get update 
sudo apt-get upgrade 
sudo apt-get dist-upgrade 
sudo apt-get autoremove && sudo reboot

I will run your updated script

bash -c "$(curl -sL https://www.dropbox.com/s/rlh710ng0zwv3vp/raspberry.sh?dl=0)"

start MM

Is this right?

sdetweil

@bdream my script does all the system updates too…

and it will start MM at the end if u use pm2.

I do all my work on my mirrors over ssh.

bdream

that’s great :grinning_face:

at the beginning it asks that’s not an Raspberry 2 or 3… continue?
So I try with Raspberry Zerro again.

hope it will work now as I will be off next 2-3 weeks.

sdetweil

@bdream correct, just hit enter to continue

bdream

it’s running now.:crossed_fingers_medium-light_skin_tone: