@PaulB
Are you sure that the Switzerland version is the right to use?

You should go for “Euro Stecker flach” like this:
http://picclick.de/GAO-Euro-Steckdosenleiste-4-fach-flach-15-m-Kabel-181929247191.html

At least, if you are using german connectors.

Maybe this is what you’re looking for?
https://forum.magicmirror.builders/topic/516/display-modules-in-a-carousel

Thx @bhepler
this helped to reduce my temperature from 80 °C to 50-60 °C.
Maybe the 80 °C even caused the wake up problem? :)

Anyway, I think I’ll try the voice activation module tomorrow.
Somehow it’s even very sweet to say “Mirror, Mirror on the wall. Wake up!”.

Haha, looks like my development setup.
But since I got a curved TV you wouldn’t believe that it is for a mirror. (Or you’d take me for an idiot).

Thanks @Beh ! Great module!
Is there a chance to increase the radius of stations?
In my case, I can either check the bus or the underground since they have different IDs.
I would be perfect if I could get all possible departures from within 10 minutes walk.
Is there a chance to add multiple IDs?

cheers
done

@strawberry-3.141 Ok, I’ll give it a try. Tomorrow morning, I will test again. Thx!

Hi @strawberry-3.141
Thanks for your answer
I disabled the screensaver by editing (found here
Is that what you had in mind?

sudo nano /home/pi/.config/lxsession/LXDE-pi/autostart

@lxpanel --profile LXDE-pi
@pcmanfm --desktop --profile LXDE-pi
#@xscreensaver -no-splash

@xset s off
@xset -dpms
@xset s noblank
@unclutter

Strange that my camera driver was not working today.
I had to activate the cam in the pi config again.

In the morning the cam led was on but when I tried to wake up the monitor the led just turned off.

I use a v1.3 cam on a rpi3.

@bhepler Sorry, I haven’t tried yet. :)
I installed the cam and the module yesterday and motion detection worked.
But I experienced the same issue this morning. Wake up problem is not solved.

Hi and thanks to everybody making this module work!

@cpramhofer Did your solution solve the issue that the monitor did not switch on again after a longer period of time?