@mrdenmark Maybe this will help:
https://discourse.pi-hole.net/t/how-to-fully-uninstall-pihole/14133
But otherwise just save the config.js, and the list of modules, and do a clean install and install the modules and apply the config.js
Oh, and the ‘dict’ files as well, if you use MMM-MQTTbridge.
Held og lykke!
Read the statement by Michael Teeuw here.
Posts made by fribse
-
RE: Lost Internet connection
-
RE: http connection denied despite open whiteList
@klinge you are tying it to localhost only? If you do that, you can’t connect to it, it should be 0.0.0.0 or something like that?
-
RE: Home Assistant integration
@egnos I had plans on activating the voice assistant in the mirror directly, but I’ve not found a good setup yet.
-
RE: Home Assistant integration
@daniel_svk I’ve written some guides on the HA forum about the integration, by using the MQTTBridge and Mosquitto on HA. You can find the post here
-
Reinstalled MM, using sdetwell script - no autostart?
Hi All
I used @sdetweil install script to reinstall my magic mirror software, too much experimentation had filled up the microsd card, so I took a bigger one, and reinstalled it to that, but after doing that, the magicmirror doesn’t autostart.
I used the script, and set it to use pm2, but no autostart? -
RE: Two-Way mirror suppliers Ireland
@Dermo134 If you need real glass, I would go with the community order on this site.
-
RE: I can't get mmm-screencast to work
@jste84 As long as the devices are on the same, ie. both on cable, or both on wifi, then you should be good.
One thing I wonder though, the shield, is that on cable? It could be client isolation, if you have that activated on your wifi, then it won’t work. -
RE: I can't get mmm-screencast to work
@jste84 Are the pi on wifi or cable? It could be due to mDNS not propagating across wired/wireless.