I purchased my glass from @Goldjunge_Chriz for some time a go, and got it to wall just now (couple of years later).
I am happy with how the SW side works and is easy to code, but the mirror is not reflecting very well.

I have couple of pictures above showing the reflection with and without ceiling lights on. The small makeup mirror is below for the reference.
Any ideas what I have done wrong? I have few weeks time to fix it or it will be replaced by Ikea mirror :confounded_face:

I have plywood back ground (against the glass) which I sprayed with mat-black and no light should get behind or sides to the glass.

https://www.dropbox.com/s/evand929hewdqod/20191111_071511_720x1280.jpg?dl=0

https://www.dropbox.com/s/ekf7iqsr0j57pr6/20191111_071940720x1280.jpg?dl=0

@Goldjunge_Chriz
Hi,
I don’t know how to reply properly, so I hope you can edit my info in the table:
8 | jazu | 1 | 0,8 | 0,8 | 0,8 | Oulu, Finland | NO polished edges

Is there any possibility for wider shipment? I would need actually 110cm wide, but you have 1m max for my location, so that is what I input over there. If not possible, I’ll have to manage with this one then…
Thanx!
Jazu