Same here, still loading…
Read the statement by Michael Teeuw here.
Posts made by JoeFranz
-
RE: MMM-WeatherGraph - new module using OpenWeatherMap
-
RE: PIR sensor problem after restart Raspi
@JoeFranz It is probably because of the current firmware 5.15
Withrpi-update b976c54917e240630c05a9b383010f1492bc61b4
I installed version 5.10. It now works again with the standby on the HDMI connection.
Greetings Joerg
edited due to wrong quotes outside code block -
RE: MMM-PIR-Sensor-Lite does not switch HDMI off
Thanks @sdetweil for the link :-)
It is probably due to the current firmware 5.15
Withrpi-update b976c54917e240630c05a9b383010f1492bc61b4
I installed version 5.10. It now works again with the standby on the HDMI connection.
Greetings Joerg
-
RE: PIR sensor problem after restart Raspi
@sdetweil Nothing happens in the window. :-( PIR sensor broken?
-
RE: PIR sensor problem after restart Raspi
@sdetweil ┌─────┬────────────────┬─────────────┬─────────┬─────────┬──────────┬────────┬──────┬───────────┬──────────┬──────────┬──────────┬──────────┐
│ id │ name │ namespace │ version │ mode │ pid │ uptime │ ↺ │ status │ cpu │ mem │ user │ watching │
├─────┼────────────────┼─────────────┼─────────┼─────────┼──────────┼────────┼──────┼───────────┼──────────┼──────────┼──────────┼──────────┤
│ 0 │ MagicMirror │ default │ 2.20.0 │ fork │ 12738 │ 64s │ 0 │ online │ 0% │ 2.6mb │ pi │ disabled │
└─────┴────────────────┴─────────────┴─────────┴─────────┴──────────┴────────┴──────┴───────────┴──────────┴──────────┴──────────┴──────────┘
pi@raspberrypi:~ $ -
RE: PIR sensor problem after restart Raspi
@sdetweil Ok, that tests the PIR sensor. But since the Raspi doesn’t even let the monitor go into standby, I suspect that it’s due to Raspian. Screen blanking is activated in Raspi-Config, so the monitor should switch off after 10 minutes, right? But that doesn’t work either. Or does that have nothing to do with the PIR function of MM?
-
RE: PIR sensor problem after restart Raspi
@Egnos The sensor is correctly connected
-
RE: PIR sensor problem after restart Raspi
@Egnos I did it according to this guide (in German) have the same pir sensor as in the guide.