@CFenner Good afternoon! I am still waiting for the decision to recalculate in mm Hg.
And tell me how to fix the wrong display of the wind direction?

@sil3ntstorm

@CFenner
I noticed that the module displays the wrong wind values ​ ​ from the wind sensor on the mirror. The display of speed, wind gust and wind direction is not correct… ((The display of data on the mirror from the wind sensor does not match the data in the Netatmo application and in the Netatmo personal account.

I noticed that the module displays the wrong wind values ​ ​ from the wind sensor on the mirror. The display of speed, wind gust and wind direction is not correct… ((The display of data on the mirror from the wind sensor does not match the data in the Netatmo application and in the Netatmo personal account.

@CFenner Unfortunately, I now work remotely through VNC with a mirror, the resolution is not very high and all small details are not always clear. I will check the translation in April, as I will be in that city.
Thank you, I am waiting for a recount to other pressure units.!)

I have reinstalled the entire module. And everything finally worked!) Thanks to the author of the module. I really like this module.
A huge only request to the author - add a pressure recalculation in mm Hg…!!!)))

@CFenner
Have you updated your module? Does it need to be reinstated or how to update it?

@sdetweil
Thank you ))
When I sent the message, I already understood))
But you can only delete it when it is published… (

@Mitch_66
Unfortunately, I did not understand your answer… (
What does “autocorrection” mean…?

@Mitch_66 said in MMM-Netatmo updated:

@Laz

Couldn‘t make the Renner module work again. Good luck!

And what is this “Rener module”?

Does anyone have this module running now?

@Mitch_66
Good afternoon!
Do you use what module of Netatmo of the author?
I use the module from CFenner
In July the module ceased to become authorized. In August the author finished it, but after completion (some files were replaced), at restart of a mirror all modules ceased to be started. If to rename the folder of the module of Netatmo, then other modules are started.

I tried to return the kept folder of the module of their archive, with the old version of this module all other modules are started. Except the module of Netatmo. I tried also your config (with my data), but all the same the module isn’t started… (((

@Mitch_66
Thank you!
I’ll try to check. Unfortunately, I have already left the city where my MM is standing. I will try through VNC access.

I understand the stupid question…)
I have remote access to the mirror via VNC on raspberries.
I need to look at and save errors for the module developer in the browser console.
How to do this?
I go to the mirror through VNC, open the browser on raspberries with the mirror running, open the console there, but it’s empty there.
I try to enter the IP address in the browser on my PC, but this address does not open.

@Mitch_66
Good afternoon!
Please show your config in this module. I also prescribed this parameter, but my Netatmo module does not appear… (((

@Tribun

@Tribun
Thank you
Did you create an app on the https://dev.netatmo.com/apps/ website?

I tried to put the RaymondMolenaar module once.

Here above (September 27, 2022) I wrote about my problem…

How did you get token ?

On the Netatmo application page, it is not clear which token should be used… ((

@Tribun
Are you using a module from CFenner?
There is no accessToken input in this module. Only clientId and clientSecret are entered.
Have you made regenerate your client id and client secret in your application on the Netatmo website?
And entered new data into the module settings and everything worked?

(In addition to the problem with authorization in the Netatmo module in the Magic mirror, I have the same problem with authorization in the RainMachine auto-watering device. There, too, the login\password and client id and client secret are entered. Creating a new application on the Netatmo website and entering new data in the RainMachine settings did not help with authorization…)

@meikelrix Tell me, do you have a module working now? Netatmo did something again with authorization… ((

@Laz The module CFenner stopped working, apparently the problem is authorization (Netatmo developers have changed the method of authorization). How to log in now?