@djsunrise19 said in Electron CPU usage:
about 50-60%
That is even high, in my opinion, based on my results
@djsunrise19 said in Electron CPU usage:
about 50-60%
That is even high, in my opinion, based on my results
@djsunrise19 said in Electron CPU usage:
Here is a picture from my ATB, that arrives today. Naked installations, standard config / css / modules. 75% peak. Bad.
Oh hell no. This issue gets more mysterious by the day!
@djsunrise19 said in Electron CPU usage:
Both of them are the BCM2835 Hardware-Versions. First BCM2835 has the problem, the other BCM2835 hasn’t. Wow… :-D
Well, there goes my theory, if the installations are exactly alike.
@abergy said in Problem after installing MM on Pi Zero W:
Should I buy a Raspi3 to save my nerves ^^?
There is certainly less trouble with a Pi3. Installation is more direct and you don’t need any work-arounds. Your nerves are another matter. :^)
@TiemenMoesker said in Electron CPU usage:
This is what I found just typing in Rapberry BCM2835.
Not sure if this has anything to do with this problem tho.
I read through both links. I don’t see anything that applies to this problem directly.
You want help as quickly as possible, right?
These suggestions will save you time and frustration.
“I installed a module and it doesn’t work” certainly won’t get you answers very quickly.
Anyone that wants to help you will now have to ask you questions for information before they can.
That’s not what you want. You want answers and you want them now!
Post any error messages that appeared in your terminal or console.
If it’s a config error, post your config.
Don’t wait to be asked for them. That will delay the answers you are seeking.
Basically, you want to give as much specific information as you can.
The more you give, the easier it is for someone to help you.
It is extremely difficult to see code in a picture.
Properly formatted code is easiest to read and diagnose.
Use the </>
selection when posting code.
So make it easier for them to help you as quickly as possible.
Or, you can just go on killing time! :^)
Peace!
@cowboysdude said in stronger Raspberry Pi 3 Alternatives:
Easy to put out of the way … NOW to build a frame for the ‘display’
Great idea! Now hurry the hell up with the frame! :^)
@TiemenMoesker said in Electron CPU usage:
I have installed the MMM-Earth module and the same thing happends.
That makes perfect sense. If your Pi struggles with the simple compliments transition then it would certainly have trouble with MMM-EARTH. I’m even more sympathetic now because that’s my module! :-(
@TiemenMoesker said in Electron CPU usage:
researched the BCM2835 today if there where any known problems with it.
You have a link for that?