@jcasman Good question! First, the frame: I’d reinforce the corners rather than running struts across the middle. I thought the struts would be dual-purpose, holding in the display as well as strengthening the frame, but as you can see in the pics the frame is bulging a little on the left side. I think I’d strengthen the corners and then just put a couple of blocks about 40% of the way down to hold the display in place. These would be screwed to the side of the frame rather than running the full width or depth across to the other side.

Second, I’d fully disassemble the display, taking the LCD controller and power circuitboard out of their metal housing, to decrease bulk and weight.

Third: shorter cables. Everything I’ve used for power, usb, etc on the back side is what came with each piece, so a full-length power cord, full-length USB, full-length HDMI… All of that adds bulk. I’d get the shortest versions possible next time.

Fourth: glass mirror. While the glass+mirrored film works, it was a pain to get the film to adhere properly, with bubbles or cat hair in between it and the glass, and took a long time to fully cure. The end result, as i said, works, and the text is quite legible through the film, but the mirror does have a bit of a funhouse effect (note top of door on the left).

All said and done, this gives me a great idea of how a finished version could look and it lets me move it around to try different positions, walls, rooms, etc. Doesn’t feel like I wasted any time and I’m not really out of pocket for any of the parts except the film.

@sonicgoose said in My first Magic Mirror build in an old imac:

I’ve been doing the same thing with a 20" white Intel iMac, but have had one helluva time. None of the display controllers work with the native LG 1600x1050 display Apple put in these things, so I’ve basically gutted the iMac and am putting in a new display, etc.

Not to hijack the thread, but this is how mine turned out.

Hello,

Upgraded to MM v2.7.0 (backed up first!) and npm start dev shows the following error:

Cannot find module '/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/grpc/src/node/extension_binary/electron-v3.0-linux-arm-glibc/grpc_node.node'

I believe this is detailed here at the bottom under the heading “downgrade grpc to v1.13” but I’m not experienced enough to know if this will also work with MM v2.7.0. Anyone tried it yet?

@DarrenHill Are you #&%*ing kidding me?!? An n? That’s what’s been driving me nuts? Aaaaaarrrrrrgggghhhhhhhhh!

It works now.

Thank you all very much for your help. Even when I gave up, you guys didn’t, and I appreciate that.

So here’s my first attempt at a smart mirror using MagicMirror. I’ve had it displayed on a monitor rotated 90º for about a month while I tweaked the modules and researched mirrors. Given that…

• it is my first attempt
• I’m not very handy with tools
• I wanted to get a feel for it quickly
• I wasn’t sure about final placement in my apartment

…I took the cheap route. I had an Ikea picture frame lying around that has a glass insert and used a small monitor that work was throwing away. I bought mirrored film and applied it to the back of the glass as the instructions indicated. This was by far the worst step. The sides of the film kept rolling up on me. It isn’t perfect, but I didn’t expect it to be the first time around (see bullet points above). I’m happy with how it functions, though, so building a better frame and using proper two-way glass next time will be my focus.

Lights off:

Lights on:

I need to get a usb-powered speaker so I can actually hear MMM-AssistantMk2, but the usb microphone plugged into the back of the monitor picks up my voice quite well.

Thoughts?

I’m loving this module. I found, however, that I was getting multiple results for some airports where the METAR had changed more than once in the last hour. That was easily fixed by editing the .js to add ‘&mostRecentForEachStation=true’ to the end of the url. And because I’m not a pilot, I couldn’t remember what the red, blue, green, etc colours meant, so I hardcoded those in as well. Much more useful to me now!

@sonicgoose A complete system reboot seems to have fixed whatever issue existed.