https://imgur.com/a/AzUgA7E

Made my first Magic Mirror using an old Samsung LED 24" monitor, some 3mm Silver See-Thru Mirror Acrylic and of course a Raspberry Pi 3 Model B, finished with a DIY frame which didn’t turn out too badly…

It’s pretty slimline at around 1.5" thick! Cant really wall mount it because of the monitor used but I’m happy to just rest it.

The acrylic mirror is pretty decent but it is a bit distorted - I think that’s because it’s a bit of a tight fit in the frame and the frame isn’t 100% true.

I’ve set it up more since so I’ll post a newer photo tomorrow which shows the current setup.

Thanks!

@Mykle1 said in First mirror built! DIY frame :P:

@spooke said in First mirror built! DIY frame :P:

Cant really wall mount it

Sure you can. Give it some thought. :-)

I like the natural grain of the wood, too. :-)

Thanks, I’ll figure something out, need some 90 degree connectors first though :P

@idoodler said in First mirror built! DIY frame :P:

Looks nice! You could use a VESA mount, I am sure your monitor is VESA compatible.

Thank you, but it’s not VESA mount :(

https://imgur.com/a/AzUgA7E

Made my first Magic Mirror using an old Samsung LED 24" monitor, some 3mm Silver See-Thru Mirror Acrylic and of course a Raspberry Pi 3 Model B, finished with a DIY frame which didn’t turn out too badly…

It’s pretty slimline at around 1.5" thick! Cant really wall mount it because of the monitor used but I’m happy to just rest it.

The acrylic mirror is pretty decent but it is a bit distorted - I think that’s because it’s a bit of a tight fit in the frame and the frame isn’t 100% true.

I’ve set it up more since so I’ll post a newer photo tomorrow which shows the current setup.

Thanks!