Hm, wunderground provides hurricane data. That should not be too complicated on first sight.

That kind of depends what you intend to do. Basically you can use every box (spare laptop, full workstation, small devices like raspberry, …) running Windows, Linux or MacOS.
However the raspberry is strong enough for most users, so I’m curious why you are asking for a stronger alternative.
Don’t be to anxious about Linux, once you setup your magicmirror you don’t have to twiddle around with Linux all day long.

I just completed it

Description:

It monitors a given station in the RNV traffic network and shows the 10 upcoming departures with destination, type and delay. It also shows additional information if provided by the vendor.

Screenshots:

Download:

[card:yawnsde/MMM-RNV]

---

Version 1.0.0

• initial release

Version 1.1.0

• some more error handling
• added some tweaks in case the start time is after midnight, then the parsing failed
• added the alert ticker if some alert is present
• updated the readme
• removed odd default value for stationID from the module

@Guschdl
Hi, glad you like it. Please let me know if anything should be changed.

I updated the module.

• some more error handling
• added some tweaks in case the start time is after midnight, then the parsing failed
• added the alert ticker if some alert is present
• updated the readme
• removed odd default value for stationID from the module

Please run a “git pull” inside the MMM-RNV directory to receive the update. Please update your config file in case you left out the stationID.

Maybe @paviro or another moderator could mark this as resolved?

@Guschdl
All right, I’m almost done. The module will need some tweaking and some cleanup, but you can use it. I will provide some installation and configuration instructions this evening (my wife is working long this evening :D ). Feel free to provide feedback and improvements.

[card:yawnsde/MMM-RNV]

@Steff
No need to apologize, this is just a fun thing, we all have our real live and more important stuff to do.
Did they ship the mirror or did you have to pick it up your self?

Take A look here: https://forum.magicmirror.builders/topic/946/refresh-hello-world-module/3

Right. I have the 4 pin version and this requires a resistor

@psk
That depends on the sensor you buy. If you use a sensor with 4 pins you need the resistor. If you use the sensor with 3 pins mounted to a circuit board you don’t need the resistor.