MMM-ProfileSwitcher, A Profile/User/Layout Switching Module

paul.calladine

My mirror is just about finished, I have the MMM-PIRSensor working and MMM-Buttons working which both allow me to wake/sleep the monitor working fine.

However i’d like to use MMM-Buttons as a toggle switch to enable me to essentially enable or disable the PIR sensor module:

i.e.
Profile 1 - PIRSensor wakes and turns off the monitor as normal
Profile 2 - PIRSensor doesn’t do anything on motion being detected and the screen stays off

I was thinking of modifying the code to do this but does anyone know if this module will allow me to achieve the results? Essentially having two profiles the same but profile 1 includes the PIRSensor module?

jdfraser

Hello and thanks for creating this module! I have experimenting with creating a photo frame and hope that your ProfileSwitcher will get me the rest of the way there.

I am having an issue with MMM-ProfileSwitcher and using it with MMM-RandomBackground or MMM-RandomPhoto. I have tried some simple troubleshooting steps, but am not sure how to proceed further and hope you could help.

I have simplified my config.js to try and eliminate other sources as being the issue. Currently I am experimenting using only the clock module, MMM-RandomBackground and MMM-ProfileSwitcher. I have 3 profiles ‘TestA’, ‘TestB’ and default. I ideally like to be able to show a random photo on my frame and alternate having overlays of weather / time / news / etc. based on the profile.

My idea is to have a class that shows the random photo at a reduced opacity that can have some overlay infomation (clock, weather, news, etc.). And another class that only shows the photo at full opacity.

The problem I have is that if my config.js has more than one entry for MMM-RandomBackground, it ignores more than the one entry. I am sure I have configured it correctly and have included my config.js below, but I only see a background photo for “TestA” Profile.

modules: [
	   {
			module: 'MMM-ProfileSwitcher',
			header: 'Profile',
			config: {
				defaultTime: 10000,
				defaultClass: 'default',
				everyoneClass: 'everyone',
				useLockStrings: true,
				leaveMessages: false,
				enterMessages: false,
				timers: {
					// when TestA is selected swap to the defaultClass after the defaultTime
					"TestA": {},
				    	//
				        // When TestB is selected swap to TestA after 20 seconds
				        "TestB": {
						profile: "TestA",
					    //	time: 20 * 1000
					},
					"default": {
						profile: "TestB"
					}
				}

			}
		},
		{
			module: 'alert',
			displayTime: 10000
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			disabled: false,
			classes: "TestA",
			position: "bottom_left",
			config: {
				timeFormat: 12,
				displaySeconds: false,
				showPeriod: false,
				clockBold: false,
				dateFormat: "MMMM Do"
			}
		},
		{
			module: "clock",
			disabled: false,
			classes: "default",
			position: "top_right",
			config: {
				timeFormat: 12,
				displaySeconds: false,
				showPeriod: false,
				clockBold: false,
				dateFormat: "MMMM Do"
			}
		},
		{
			module: "clock",
			disabled: false,
			classes: "TestB",
			position: "top_left",
			config: {
				timeFormat: 12,
				displaySeconds: false,
				showPeriod: false,
				clockBold: false,
				dateFormat: "MMMM Do"
			}
		},
		{
			module : 'MMM-RandomBackground',
			disabled: false,
			classes: "TestA",
			position : 'fullscreen_below', // Any region but this one makes the most sense
			config : {
				animationSpeed : 2000,
				updateInterval : 50000,
				opacity : 1
			}
		},
			{
			module : 'MMM-RandomBackground',
			disabled: false,
			classes: "TestB",
			position : 'fullscreen_below', // Any region but this one makes the most sense
			config : {
				animationSpeed : 2000,
				updateInterval : 50000,
				opacity : 0.5
			}
		},
		]

};

If you are able to offer any insight as to why this might be happening or further troubleshooting I could do, I would greatly appreciate it.

*** Full disclosure ***
I originally posted this help request under another topic, but thought there would be a better chance that I might get more timely help with my issue in this topic. Sorry for the cross-post. :)

Cyberdyne

Is it possible to include a BT detection to switch profiles? RPi3 has a build BT which is not used (at least in my configuration) by the MagicMirror. It would be great if personal stuff like the calender could be switched depending on the BT device (Smartphone, Smartwatch, Fitnesstracker, …) which is near by.

I was searching for identification via BT on the RPi and this is what I have found so far:

“…present/absent can be done with very little power consumption on rPi and iPhone. Install bluetooth dongle on rPi as: (sudo aptitude install bluetooth bluez-utils bluez-compat). Figure out mac of your phone device by making it searchable and then do (hcitool scan) on rPi. Then connect to your device (make sure its searchable) as: sudo bluez-simple-agent hci0 mac_of_your_device and say yes on both sides. Then sudo bluez-test-device trusted mac_of_your_device. Now they both “know” each other. Then do sudo hcitool name mac_of_your_device in your favourite script to figure out if the iphone is nearby. This will not create a connection - but just say hi to it. If it returns a name, phone is nearby. If it returns nothing - phone is not nearby or bluetooth is switched off. Compared to creating connections or other distance computation methods out there - this method conserves battery on both sides and keeps airwave pollution to a minimum.” (found here)

and this would be even better with distance sensing:
https://www.raspberrypi.org/forums/viewtopic.php?f=37&t=47466

fcornelius

@cyberdyne I had the same idea two days ago and did some research on it. I also asked /r/smartmirrors for some advice on it and got pretty good tips. The bottom line is, if you want to have a solid, non hacky solution supporting both iOS/android go the other way round with the use of beacons.

Thread is here

3squaremirror

having issue showing MMM-Profilepicture using MMM-ModuleScheduler and MMM-ProfileSwitcher.

I’m trying to switch a day and night time image with profilepicture. Using modulescheduler to switch the image based on the time.

As far as I can tell, each module is running correctly, as I’m not seeing any error in the console log.

i think the issue has to do with LockStrings, and i don’t know how to fix it

Will not show MMM-Profilepicture. LockStrings active: module_2_MMM-ProfileSwitcher

my configs

//////////////////// profile ///////////////////////////
//////////////////// profile ///////////////////////////
        {
            module: 'MMM-ProfileSwitcher',
            disabled: false,
            classes: 'default everyone',
            config: {
                // See 'Configuration options' for more information.
                    defaultClass: 'default',
                    everyoneClass: 'everyone',
            }
        },
    
     {
        module: 'MMM-ModuleScheduler',
        disabled: false,
        classes: 'default everyone',
        config: {
            notification_schedule: [
                // SWITCH TO THE DAY PROFILE AT 07:30 EVERY DAY
                {notification: 'CURRENT_PROFILE', schedule: '30 7 * * *', payload: 'day'},
                // SWITCH TO THE NIGHT PROFILE AT 23:30 EVERY DAY
                {notification: 'CURRENT_PROFILE', schedule: '30 18 * * *', payload: 'night'},
            ]
        }
    },
    
        {
            module: "MMM-Profilepicture",
            position: "fullscreen_below",
            classes: "day",
            disabled: false,
            config: {
                url: "https://images.unsplash.com/photo-1623150502742-6a849aa94be4?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1980&q=80",
                opacity: 1,
                maxWidth: "120%",
                maxHeight: "120%",
            }
        },
    
        {
            module: "MMM-Profilepicture",
            position: "fullscreen_below",
            classes: "night",
            disabled: false,
            config: {
                url: "https://images.unsplash.com/photo-1620121692029-d088224ddc74?ixlib=rb-4.0.3&ixid=MnwxMjA3fDB8MHxwaG90by1wYWdlfHx8fGVufDB8fHx8&auto=format&fit=crop&w=1980&q=80",
                opacity: 1,
                maxWidth: "140%",
                maxHeight: "140%",
            }
        },
    ////////////////end profile //////////////////////////

sdetweil

@3squaremirror don’t know, but please don’t double post.

members with reputation below 2 have every post reviewed.

this stops the unrelated spam we get every day (6 this morning).

sdetweil

@3squaremirror yes. profileswitcher says it’s in charge of hiding and showing modules (via lockstring)

so. can u force profile switcher to switch to that users profile?

3squaremirror

@sdetweil my apology about the double posting, it’s noted. i am not clear on how to force profile switcher to switch. can you elaborate that?

sdetweil

@3squaremirror sorry, no idea. was just a thought. know nothing about the module

wishmaster270

@3squaremirror
Do you use any other modules which may hide/show modules?
If i copy your configuration to my test environment and add some notifications (change day/night every minute) everything works as expected.