Changing icons of the modules Current Weather and Weather Forecast

[Manu85]

@sdetweil I’ll try

[sdetweil]

@Manu85 here is the module config I used
I took the size from the original web page

{
		module: 'MMM-SmartWebDisplay',
		position: 'middle_center',	// This can be any of the regions.
		config: {
			// See 'Configuration options' for more information.
			logDebug: false, //set to true to get detailed debug logs. To see them : "Ctrl+Shift+i"
			height:"350px", //hauteur du cadre en pixel ou %
			width:"650px", //largeur
               		updateInterval: 0, //in min. Set it to 0 for no refresh (for videos)
                	NextURLInterval: 0.5, //in min, set it to 0 not to have automatic URL change. If only 1 URL given, it will be updated
                	displayLastUpdate: true, //to display the last update of the URL
					displayLastUpdateFormat: 'ddd - HH:mm:ss', //format of the date and time to display
                	url: ["https://isstracker.spaceflight.esa.int/"], //source of the URL to be displayed
					scrolling: "no", // allow scrolling or not. html 4 only
					shutoffDelay: 10000 //delay in miliseconds to video shut-off while using together with MMM-PIR-Sensor
			}
	},

I didn’t change anything other than size and url
there could be other settings needed…

[Manu85]

@sdetweil I did like you I see the image clearly on the MM, but it disappears every 3 seconds then recharges continuously, the green LED of the raspberry is lit very often, as if the module required a lot of resources from the pi

[Manu85]

@sdetweil I found, you have to set this setting to “0”, otherwise it reloads every 30 seconds

NextURLInterval: 0,

[Manu85]

@sdetweil Hello Sam, I still need your help, I saw KristjanESPERANTO’s module: MMM-OneCallWeather which I really like, so I installed this module I copied his example from js.config which I have completed with my elements longitude, latitude apy key, I tested my api key on the internet in version 2.5 and it works, so I changed the version in MMM-OneCallWeather.js, as Kristjan explains in the github, and when I restart the MM it notifies loading and nothing happens, I tried to understand, but I’m stuck, so I call a specialist :-)

[sdetweil]

@Manu85 said in Changing icons of the modules Current Weather and Weather Forecast:

-OneCall

OneCall requires the v3 key and api as I understand it…

[Manu85]

@sdetweil In detail he says this:
(apiVersion The OpenWeatherMap API version to use. Change it to “2.5” if you have an old apikey

Default value: 3.0)
I understood that if we had an old version then we had to change this parameter but I may have misinterpreted

[Manu85]

@sdetweil when I connect to an internet page it gives me this, so I think it’s active, I entered lat, long and api key

[sdetweil]

@Manu85 as far as I can tell, the one call API with keys since mid 2023 is only available via the v3.0 apikey setting

[Manu85]

@sdetweil So it pays?