Read the statement by Michael Teeuw here.
No Web UI with MMM-FastNotes
-
@rvnbrg said in No Web UI with MMM-FastNotes:
192.168.178.30
that is an odd home network address…
if you do
ip addrfrom a terminal window, is that the address you get?
-
@sdetweil This is what I get
xavier@raspberrypi:~ $ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether b8:27:eb:69:7b:37 brd ff:ff:ff:ff:ff:ff
inet 192.168.178.30/24 brd 192.168.178.255 scope global noprefixroute wlan0
valid_lft forever preferred_lft forever
inet6 fd48:42be:e531:6cb0:2d2a:6ab4:13e2:1d5a/64 scope global dynamic noprefixroute
valid_lft 1624sec preferred_lft 1624sec
inet6 fe80::56dd:2b5f:e33f:829e/64 scope link noprefixroute
valid_lft forever preferred_lft forever -
@rvnbrg said in No Web UI with MMM-FastNotes:
192.168.178.30
ok, so you should be able to connect to MM using the port from config.js
-
@sdetweil Yes that works to see the MM on my desktop web browser.
Only the FastNotes WebUI does not load -
@rvnbrg ok, looking at the code, it looks like there is a python script that provides that UI
so, in the module folder do
python3 FastNotes.py --host 192.168.178.30 --port 5000 --debug
-
@sdetweil That gives me this:
xavier@raspberrypi:~/MagicMirror/modules/MMM-FastNotes $ python3 FastNotes.py --host 192.168.178.30 --port 5000 --debug
Traceback (most recent call last):
File “/home/xavier/MagicMirror/modules/MMM-FastNotes/FastNotes.py”, line 2, in
from backend.fast_notes import start
File “/home/xavier/MagicMirror/modules/MMM-FastNotes/backend/fast_notes.py”, line 1, in
import flask
File “/usr/local/lib/python3.11/dist-packages/flask/init.py”, line 14, in
from jinja2 import escape
ImportError: cannot import name ‘escape’ from ‘jinja2’ (/usr/lib/python3/dist-packages/jinja2/init.py) -
@rvnbrg said in No Web UI with MMM-FastNotes:
ImportError: cannot import name ‘escape’ from ‘jinja2’ (/usr/lib/python3/dist-packages/jinja2/init.py)
that explains the error
-
@sdetweil how can I resolve that?
-
@rvnbrg that I don’t know
-
@sdetweil Thank you for your help so far
-
@rvnbrg i would ask the author
-
@sdetweil i did so but no response yet
-
@rvnbrg Jinja is a dependency of Flask and Flask V1.X.X uses the escape module from Jinja, however recently support for the escape module was dropped in newer versions of Jinja
To fix this issue, simply update to the newer version of Flask V2.X.X in your requirements.txt where Flask no longer uses the escape module from Jinja.
I see there is a requirements.txt where the version of Flask is specified. Maybe updating that to 2.1.1, which is the recommended version that no longer has a dependency on
escapewould resolve this.This is all just guessing. Was trying to figure out how this module hangs together. 🫣
-
@mumblebaj YES! Got it working! Thank you very very much
-
S sdetweil has marked this topic as solved on
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login