MMM-CalDAV

sdetweil

@Tiller if you are not using pm2 then the errors would be shown where you do npm start

sdetweil

@Tiller no reinstall

can you show us the new url(#2) in config.js,
assume you are still using the env variables

MMRIZE

@Tiller
CalDAV is different to general ics hosting.

Usually, the URL of Synology CalDAV accessing would be;

https://IP_OR_URL:5001/caldav/
http://IP_OR_URL:5000/caldav/

Anyway, there would be some log to diagnosis. Can you show the frontend and backend logs?

caw

@MMRIZE

Hi,

i´ve got the same problem. I´m completly new to magicmirror but the integration of my Synology CalDAV should be the main part of it.

i´ve tried several combinations and addresses but no one worked for me.

maybe its possible to get a “step - by - step” Tutorial.

hopefully you can help :)

MMRIZE

@caw

https://github.com/MMRIZE/MMM-CalDAV/wiki

Install

cd <Your MagicMirror directory>/modules
git clone https://github.com/MMRIZE/MMM-CalDAV
cd MMM-CalDAV
npm install

There would be .env (It would be hidden, so you should check it with ls -al or equivalent for your environment/OS)

If not there, copy it from env.example

cp env.example .env

Open your Synology Calendar. You can open it from your Synology Package Center Or installed app lists. Usually it will have http(s)://<IP_OR_URL>:<PORT(5000 or 5001)>/?launchApp=SYNO.Cal.Application as URL so you can open it on the browser.

You will see something like this.

Get the CadDAV account. Copy or memo the URL. Usually URL will have http(s)://<IP_OR_URL>:<PORT_5000_OR_5001>/caldav/ format.

Back to the terminal. Open the .env file with your favourite editor. Then, fulfil these lines.
Then configure the MMM-CalDAV module and the calendar module like this.

Carefully See the configuration of the calendar module.

Then run the MagicMirror.
At the very first execution, some time would be needed for CalDAV calendars to be reflected on the screen. So, just stop the MagicMirror.

If CalDAV calendars would be success to be derived, the log will say something like this.

[2024-09-03 22:52:01.461] [LOG]   [CALDAV] File: SYNOLOGY_test.ics is refreshed.

And there be files to be hosted in the service directory like these;

I have two calendars, My Calendar and test, so there would be 2 hidden ics files generated, service/.SYNOLOGY_My_20Calendar.ics and service/.SYNOLOGY_test.ics.

But the real URL consumed by the calendar module would be http://localhost:8080/CALDAV/SYNOLOGY_test.ics, don’t be confused.

Rerun the MM again. Now on the screen, your hosting calendar will be served.

caw

@MMRIZE said in MMM-CalDAV:

Hi thank you very much for the really fast supply.

the strange thing is that i configured it like you said. but if im running it the magicmirror it is showing me that the “Site is not reachable” (The Synology default page)

if im running MM just without the CALDAV Module it´s working.

I´m running the MM in Docker on the Synology.

MMRIZE

@caw could you show me the capture of error message to know what happened?

caw

@MMRIZE if i´m adding the

 {
		module :"MMM-CalDAV",
		config: {
			servers: [
				{
					envPrefix: "SYNOLOGY_",
					serverUrl: "https://myownsynologyadress.de/caldav/",
			],
		},
	},

following error occurs

MMRIZE

@caw said in MMM-CalDAV:

following error occurs

???
I cannot understand the context. What did you do? The image seems like that something on the browser.

Does your MagicMirror is executed on the Synology NAS with Docker?

MMRIZE

@caw said in MMM-CalDAV:

{
module :“MMM-CalDAV”,
config: {
servers: [
{
envPrefix: “SYNOLOGY_”,
serverUrl: “https://myownsynologyadress.de/caldav/”,
],
},
},

And you’ve missed a closing brace in your code.

 {
		module :"MMM-CalDAV",
		config: {
			servers: [
				{
					envPrefix: "SYNOLOGY_",
					serverUrl: "https://myownsynologyadress.de/caldav/",
                                 }, // <-- HERE
			],
		},
	},

caw

@MMRIZE yes the image is a screen from the browser. MM is running till i add the Caldav-Module. So i assume I missconfigured something. The missing bracket did not solve the problem in the log:

2024/09/04 15:33:13 stderr if (key?.startsWith(prefix)) {
2024/09/04 15:33:13 stderr [04.09.2024 15:33.13.728] [ERROR] /opt/magic_mirror/modules/MMM-CalDAV/node_helper.js:14
2024/09/04 15:33:13 stderr [04.09.2024 15:33.13.727] [ERROR] Whoops! There was an uncaught exception…
2024/09/04 15:33:13 stdout [04.09.2024 15:33.13.726] [LOG] No helper found for module: MMM-Carousel.
2024/09/04 15:33:13 stdout [04.09.2024 15:33.13.726] [LOG] No helper found for module: clock.
2024/09/04 15:33:13 stdout [04.09.2024 15:33.13.725] [LOG] Module helper loaded: updatenotification
2024/09/04 15:33:13 stderr at /opt/magic_mirror/js/app.js:166:6
2024/09/04 15:33:13 stderr at loadNextModule (/opt/magic_mirror/js/app.js:164:5)
2024/09/04 15:33:13 stdout [04.09.2024 15:33.13.725] [LOG] Initializing new module helper …
2024/09/04 15:33:13 stderr at loadModule (/opt/magic_mirror/js/app.js:126:19)
2024/09/04 15:33:13 stderr at require (internal/modules/cjs/helpers.js:74:18)
2024/09/04 15:33:13 stderr at Module.require (internal/modules/cjs/loader.js:887:19)
2024/09/04 15:33:13 stdout [04.09.2024 15:33.13.725] [LOG] No helper found for module: alert.
2024/09/04 15:33:13 stderr at Function.Module._load (internal/modules/cjs/loader.js:708:14)
2024/09/04 15:33:13 stderr at Module.load (internal/modules/cjs/loader.js:863:32)
2024/09/04 15:33:13 stdout [04.09.2024 15:33.13.724] [LOG] Loading module helpers …
2024/09/04 15:33:13 stderr at Object.Module._extensions…js (internal/modules/cjs/loader.js:1027:10)
2024/09/04 15:33:13 stderr at Module._compile (internal/modules/cjs/loader.js:963:27)
2024/09/04 15:33:13 stderr at wrapSafe (internal/modules/cjs/loader.js:915:16)
2024/09/04 15:33:13 stderr SyntaxError: Unexpected token ‘.’

sdetweil

@caw because you are running in server mode, the version of nodejs matters.

your version is way down level

the ?. syntax shown on line 14 is from the latest js version

caw

@sdetweil thank you very much for the information - but now i have another problem to get it updated can you help me with this?

sdetweil

@caw what environment are you running?

caw

@sdetweil im running the docker container on a Synology NAS

sdetweil

@caw what docker container?

sdetweil

@caw said in MMM-CalDAV:

"https://myownsynologyadress.de/caldav/

https: means you have a certificate for that address and have configured MMM-Caldav to run in secure mode

is that true?

typically one uses mmm-caldav to read from the foreign calendar, and emit ics data for the local machine

and make it available thru a url request (which causes the MMM-Caldav module to provide the data live)

http://mmIP:mmPort/caldav

or shorthand for this same system is (using the default mm port)

http://localhost:8080/caldav

depending on how MM is configured,
address: and ipWhitelist, by default it rejects ALL requests from OUTSIDE systems
so your loop back at - https://myownsynologyadress.de would be rejected…

I use cloudflare to map outside requests to my systems thr a tunnel, so I have https (cert provided by cloudflare) and have reconfigured my MagicMirror to allow any incoming request

address: "0.0.0.0",
ipWhitelist:[],

caw

@sdetweil im running the “container manager” on the nas and the container by bastilimbach installation guide by https://mariushosting.com/how-to-install-magicmirror-on-your-synology-nas/

caw

@sdetweil i used ipv64 to receive a certificate - but for now i dont want to get any caldav from outside or do i missunderstand something?

sdetweil

@caw said in MMM-CalDAV:

bastilimbach

that image is 4 years old, so not running the latest node or MM…

the install doc https://docs.magicmirror.builders/getting-started/installation.html#alternative-installation-methods
references this docker image
https://gitlab.com/khassel/magicmirror