Read the statement by Michael Teeuw here.
MMM-CalDAV
-
@caw this is really a docker on synology implementation issue. you created files needed by the docker container using an outside the container userid.
many modules use their folder as a cache storage location
-
I apologize but I am very very new to all of this and I was looking for a little guidance on syncing with my Apple Calendar using MMM-CalDAV. The issue I am running into is that in the [LOG] it is showing [CALDAV] /MagicMirror/modules/MMM-CalDAV/service/.ICLOUD_family.ics is not found. This is cascading into a lot of issues which results in the fetch of the family calendar isn’t happening. I am sure I am missing something simple but I can’t for the life of me find it out. Would it be possible to get some help and which direction could I investigate? Thank you all in advance.
-
@jal201 can u tell us more about your runtime environment?
are you using a NAS device, synology? or is this on a pi, without docker?
-
Thank you for your time. I believe am using a pi without a docker.
-
@jal201 said in MMM-CalDAV:
/MagicMirror/modules/MMM-CalDAV/service/.ICLOUD_family.ics
this seems to imply the config for calendar doesn’t match the config for MMM-Caldav
caldav reads the real calendar and puts the data in the configured folder
and then the MM calendar loads it from the configured folder…I am not the module author.
-
@sdetweil thank you for the information. I was curious about the *.ICLOUD file location. Do you see that in your application? Is that folder used?
-
Hello again,
sorry I had a lot of work at my job, but now I’m trying again to get this MM working.
The sync to my Synology-Calendar still isn’t working.Here are my logs:
pi@raspy:~ $ pm2 logs mm [TAILING] Tailing last 15 lines for [mm] process (change the value with --lines option) /home/pi/.pm2/logs/mm-error.log last 15 lines: 0|mm | at process.processTicksAndRejections (node:internal/process/task_queues:95:5) 0|mm | at async davRequest (/home/pi/MagicMirror/modules/MMM-CalDAV/node_modules/tsdav/dist/tsdav.cjs.js:158:25) 0|mm | at async fetchPrincipalUrl (/home/pi/MagicMirror/modules/MMM-CalDAV/node_modules/tsdav/dist/tsdav.cjs.js:1254:24) 0|mm | at async createAccount (/home/pi/MagicMirror/modules/MMM-CalDAV/node_modules/tsdav/dist/tsdav.cjs.js:1307:31) 0|mm | at async DAVClient.login (/home/pi/MagicMirror/modules/MMM-CalDAV/node_modules/tsdav/dist/tsdav.cjs.js:1659:15) 0|mm | at async Fetcher.work (/home/pi/MagicMirror/modules/MMM-CalDAV/node_helper.js:89:7) { 0|mm | [cause]: Error: getaddrinfo ENOTFOUND invalidcaldavserver.com 0|mm | at GetAddrInfoReqWrap.onlookupall [as oncomplete] (node:dns:120:26) { 0|mm | errno: -3008, 0|mm | code: 'ENOTFOUND', 0|mm | syscall: 'getaddrinfo', 0|mm | hostname: 'invalidcaldavserver.com' 0|mm | } 0|mm | }Probably some auth. problem?
Maybe you got another idea.
I’m running the MM on an Raspberry Pi Zero.Best
Till -
@Tiller
invalidcaldavserver.com???
Usually your error message is showing that URL may be wrong. -
@MMRIZE
Yes, that’s what I thought too.
But I checked it again, and it’s the same URL my Synology ist showing for the calendar.
“Http://localip:5000/caldav/”Maybe some settings on my synology are the problem?! I already checked the port, it’s open.
Best
Tillmann -
@Tiller what is localip?
-
@sdetweil
The local IP of my synology.
Something like 192.168.0.x -
@Tiller ok… just checking…
just fyi IP addresses 192.168.x.y NEVER cross the internet… they are ‘unroutable’ on purpose
172. and 10. are also like thatif you share that I cannot reach it…
mine network is 192.168.2.x
-
Hello and a happy new year to you all.
I checked the URL, tried different versions. Used the tried the same URL I use on my smartphone (the url is working), but always get the same error.
I don’t know what to do or try.
I checked the firewall and port settings on my synology, but still the same error.Do you have any other ideas?
Best
Tillmann -
@Tiller can you post your config… xx out the personal part of your source calendar
use the code block wrapper on the config post here
-
Hi Sam,
here is my config.
Thx
/* Config Sample * * For more information on how you can configure this file * see https://docs.magicmirror.builders/configuration/introduction.html * and https://docs.magicmirror.builders/modules/configuration.html * * You can use environment variables using a `config.js.template` file instead of `config.js` * which will be converted to `config.js` while starting. For more information * see https://docs.magicmirror.builders/configuration/introduction.html#enviromnent-variables */ let config = { address: "0.0.0.0", // Address to listen on, can be: // - "localhost", "127.0.0.1", "::1" to listen on loopback interface // - another specific IPv4/6 to listen on a specific interface // - "0.0.0.0", "::" to listen on any interface // Default, when address config is left out or empty, is "localhost" port: 8080, basePath: "/", // The URL path where MagicMirror² is hosted. If you are using a Reverse proxy // you must set the sub path here. basePath must end with a / ipWhitelist: [], // Set [] to allow all IP addresses // or add a specific IPv4 of 192.168.1.5 : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"], // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"], useHttps: false, // Support HTTPS or not, default "false" will use HTTP httpsPrivateKey: "", // HTTPS private key path, only require when useHttps is true httpsCertificate: "", // HTTPS Certificate path, only require when useHttps is true language: "en", locale: "en-US", logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging timeFormat: 24, units: "metric", modules: [ { module: "MMM-CalDAV", config: { servers: [ { accountType: "caldav", envPrefix: "SYNOLOGY_", serverURL: "http://synology-ip/CalDav/", }, ], }, }, { module: "alert", }, { module: "updatenotification", position: "top_bar" }, { module: "clock", position: "top_left" }, { module: "calendar", header: "US Holidays", position: "top_left", config: { calendars: [ { url: "http://localhost:8080/CALDAV/SYNOLOGY_Calendar.ics", name: "Calendar", auth: { user: 'username1', pass: 'password1', method: 'basic' }, }, ], }, }, { module: "compliments", position: "lower_third" }, { module: "weather", position: "top_right", config: { weatherProvider: "openmeteo", type: "current", lat: 51.31, lon: 7.28 } }, { module: "weather", position: "top_right", header: "Weather Forecast", config: { weatherProvider: "openmeteo", type: "forecast", lat: 51.31, lon: 7.28 } }, { module: "newsfeed", position: "bottom_bar", config: { feeds: [ { title: "New York Times", url: "https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml" } ], showSourceTitle: true, showPublishDate: true, broadcastNewsFeeds: true, broadcastNewsUpdates: true } }, ] }; /*************** DO NOT EDIT THE LINE BELOW ***************/ if (typeof module !== "undefined") { module.exports = config; } -
@Tiller thanks… just needed caldav and calendar
-
-
No, it still doesn’t work. I checked the path of the .ics, which should be stored in /MagicMirror/MMM-CalDav/service/
as a hidden file, but I can only find the placeholder.txtTillmann
-
@Tiller i do not know… sounds like the MMM-CalDav module didn’t mnake the conversion for some reason
-
Hello,
it’s working now, but without the MMM-CalDAV module.
I checked the url I’m using on my phone and just added it to the standard calendar module and added a “.ics” at the end of the url. Now it’s working. I tried this before and it wasn’t working.
Now it is.
Thanks for your help and support.Best
Tillmann
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login