A New Chapter for MagicMirror: The Community Takes the Lead
Read the statement by Michael Teeuw here.
Read the statement by Michael Teeuw here.
MMM-FroniusSolar family modules
-
Hi,
Thanks for your response - I am attempting to install Fronius Solar 2 and have commented out the line in node-helper.js as advised in a previous post ( //const fetch = require(“node-fetch”);) and ran MM.It all loaded OK with no errors but it doesn’t show up on the dashboard, doesn’t even say loading. IP address is correct.
Wayne
-
@waynerob11 Hello,
I’ve created a version with console.logs inside. Go to the MMM-FroniusSolar2 module folder and replace the files with this content:MMM-FroniusSolar2.js:
Module.register("MMM-FroniusSolar2", { defaults: { InverterIP: "192.168.178.134", updateInterval: 60000, // Update every 60 seconds icons: { P_Akku: "mdi:car-battery", P_Grid: "mdi:transmission-tower", P_Load: "mdi:home-lightbulb", P_PV: "mdi:solar-panel-large", }, Radius: 80, // Radius for the SVG gauges MaxPower: 1000, // Maximum power for grid, house, and battery MaxPowerPV: 10400, // Maximum power for solar PV ShowText: true, TextMessge: [ { about: "600", Text: "Leicht erhöhter Netzbezug.", color: "#999" }, { about: "1000", Text: "Über 1 KW Netzbezug!", color: "#ffffff" }, { about: "1500", Text: "Über 1,5KW Netzbezug.", color: "#eea205" }, { about: "2500", Text: "Über 2,5KW aus dem Netz!", color: "#ec7c25" }, { about: "5000", Text: "Auto lädt, richtig? Nächstes Mal auf Sonne warten.", color: "#cc0605" }, { less: "-500", Text: "Sonne scheint! Mehr als 500W frei.", color: "#f8f32b" }, { less: "-2000", Text: "Wäsche waschen! Über 2KW freie Energie!", color: "#00bb2d" }, { less: "-4000", Text: "Auto laden! Über 4KW freie Energie!", color: "#f80000" }, ], debug: true, // Set to true to enable debug logging }, start: function () { if (this.config.debug) { console.log("[MMM-FroniusSolar2] Starting module with config:", this.config); } this.solarData = null; this.solarSOC = null; // Added for SOC console.log("[MMM-FroniusSolar2] Sending configuration to node_helper..."); this.sendSocketNotification("SET_CONFIG", this.config); // Send configuration to node_helper this.scheduleUpdate(); // Schedule periodic updates }, getStyles: function () { return ["MMM-FroniusSolar2.css", "https://code.iconify.design/2/2.2.1/iconify.min.js"]; }, scheduleUpdate: function () { if (this.config.debug) { console.log("[MMM-FroniusSolar2] Scheduling updates every", this.config.updateInterval, "ms"); } const self = this; setInterval(function () { if (self.config.debug) { console.log("[MMM-FroniusSolar2] Requesting data update from node_helper..."); } self.sendSocketNotification("GET_FRONIUS_DATA"); }, this.config.updateInterval); }, socketNotificationReceived: function (notification, payload) { if (notification === "FRONIUS_DATA") { if (this.config.debug) { console.log("[MMM-FroniusSolar2] Received FRONIUS_DATA:", payload); } this.solarData = { P_Akku: Math.round(payload.P_Akku || 0), P_Grid: Math.round(payload.P_Grid || 0), P_Load: Math.round(payload.P_Load || 0), P_PV: Math.round(payload.P_PV || 0), }; this.solarSOC = payload.Inverters && payload.Inverters["1"] && payload.Inverters["1"].SOC ? Math.round(payload.Inverters["1"].SOC) : 0; // Fallback to 0 if SOC is undefined if (this.config.debug) { console.log("[MMM-FroniusSolar2] Processed solarData:", this.solarData, "SOC:", this.solarSOC); } this.updateDom(); } }, getDom: function () { if (this.config.debug) { console.log("[MMM-FroniusSolar2] Rendering DOM"); } const wrapper = document.createElement("div"); wrapper.className = "solar2-wrapper"; if (!this.solarData) { wrapper.innerHTML = "Loading..."; return wrapper; } const radius = this.config.Radius || 80; const strokeWidth = 12; const svgSize = 350; // Adjusted SVG height for labels and padding // Recalculate house consumption const outerPower = this.solarData.P_Grid + this.solarData.P_Akku + this.solarData.P_PV; // Fixed positions for the gauges in dice layout const positions = { PV: { x: 75, y: 75 }, Grid: { x: 225, y: 75 }, Akku: { x: 75, y: 225 }, House: { x: 225, y: 225 } }; // Define colors for gauges const gridColor = this.solarData.P_Grid >= 0 ? "#808080" : "#add8e6"; // Gray for positive, light blue for negative const akkuColor = "#00ff00"; // Always green const pvColor = "#ffff00"; // Always yellow // House Gauge: Logic for color determination let houseColor; if (this.solarData.P_Akku - 100 > Math.abs(this.solarData.P_Grid)) { houseColor = "#a3c49f"; // Light green for high battery activity } else if (this.solarData.P_Grid > 150) { houseColor = "#808080"; // Gray for high grid consumption } else if (outerPower > 0) { houseColor = "#00ff00"; // Green for positive power flow } else { houseColor = "#1f84ff"; // Light blue } if (this.config.debug) { console.log("[MMM-FroniusSolar2] Gauge colors determined:", { pvColor, gridColor, akkuColor, houseColor }); } // Create unified SVG const svg = document.createElementNS("http://www.w3.org/2000/svg", "svg"); svg.setAttribute("width", svgSize); svg.setAttribute("height", svgSize); svg.setAttribute("viewBox", "0 -20 300 350"); // Adjusted viewBox to fix label cutoff svg.style.margin = "auto"; // Center the SVG // Define glow effect const defs = document.createElementNS("http://www.w3.org/2000/svg", "defs"); defs.innerHTML = ` <filter id="glow"> <feGaussianBlur in="SourceGraphic" stdDeviation="4" result="blurred" /> <feMerge> <feMergeNode in="blurred" /> <feMergeNode in="SourceGraphic" /> </feMerge> </filter> `; svg.appendChild(defs); // Function to create a line const createLine = (x1, y1, x2, y2, color) => { if (this.config.debug) { console.log("[MMM-FroniusSolar2] Creating line:", { x1, y1, x2, y2, color }); } const line = document.createElementNS("http://www.w3.org/2000/svg", "line"); line.setAttribute("x1", x1); line.setAttribute("y1", y1); line.setAttribute("x2", x2); line.setAttribute("y2", y2); line.setAttribute("stroke", color); line.setAttribute("stroke-width", "4"); line.setAttribute("class", "flow-lines"); return line; }; // Add flow lines based on power conditions if (this.solarData.P_Akku < -10 && this.solarData.P_PV > 0 ) { svg.appendChild(createLine(positions.PV.x, positions.PV.y + radius, positions.Akku.x, positions.Akku.y - radius, "#ffff00")); } if (this.solarData.P_PV > 10) { svg.appendChild(createLine(positions.PV.x + (radius * 0.7071), positions.PV.y + (radius * 0.7071), positions.House.x - (radius * 0.7071), positions.House.y - (radius * 0.7071), "#ffff00")); } if (this.solarData.P_Grid > 10) { svg.appendChild(createLine(positions.Grid.x, positions.Grid.y + radius, positions.House.x, positions.House.y - radius, "#808080")); } if (this.solarData.P_Akku > 10) { svg.appendChild(createLine(positions.Akku.x + radius, positions.Akku.y, positions.House.x - radius, positions.House.y, "#00ff00")); } if (this.solarData.P_Grid < -10 && this.solarData.P_PV > Math.abs(this.solarData.P_Grid)) { svg.appendChild(createLine(positions.PV.x + radius, positions.PV.y, positions.Grid.x - radius, positions.Grid.y, "#add8e6")); } if (this.solarData.P_Grid < -10 && this.solarData.P_PV <= 0) { svg.appendChild(createLine(positions.Akku.x + (radius * 0.7071), positions.Akku.y - (radius * 0.7071), positions.Grid.x - (radius * 0.7071), positions.Grid.y + (radius * 0.7071), "#00ff00")); } if (this.solarData.P_PV <= 0 && this.solarData.P_Akku < -10) { svg.appendChild(createLine(positions.Grid.x - (radius * 0.7071), positions.Grid.y + (radius * 0.7071), positions.Akku.x + (radius * 0.7071), positions.Akku.y - (radius * 0.7071), "#808080")); } // Function to create a gauge const createGauge = (x, y, mainValue, subValue, percentage, color, label, icon, labelPosition) => { if (this.config.debug) { console.log("[MMM-FroniusSolar2] Creating gauge:", { label, mainValue, subValue, percentage, color }); } const group = document.createElementNS("http://www.w3.org/2000/svg", "g"); group.setAttribute("transform", `translate(${x},${y})`); // Circle Background const bgCircle = document.createElementNS("http://www.w3.org/2000/svg", "circle"); bgCircle.setAttribute("cx", 0); bgCircle.setAttribute("cy", 0); bgCircle.setAttribute("r", radius); bgCircle.setAttribute("stroke", "#e0e0e0"); bgCircle.setAttribute("opacity", "1"); bgCircle.setAttribute("stroke-width", strokeWidth); bgCircle.setAttribute("fill", "none"); group.appendChild(bgCircle); // Circle Progress with glow const progressCircle = document.createElementNS("http://www.w3.org/2000/svg", "circle"); progressCircle.setAttribute("cx", 0); progressCircle.setAttribute("cy", 0); progressCircle.setAttribute("r", radius); progressCircle.setAttribute("stroke", color); progressCircle.setAttribute("stroke-width", strokeWidth); progressCircle.setAttribute("fill", "none"); progressCircle.setAttribute("stroke-dasharray", `${percentage * 2 * Math.PI * radius} ${2 * Math.PI * radius}`); progressCircle.setAttribute("transform", "rotate(-90 0 0)"); progressCircle.setAttribute("filter", "url(#glow)"); // Apply glow filter group.appendChild(progressCircle); // Main Text const mainText = document.createElementNS("http://www.w3.org/2000/svg", "text"); mainText.setAttribute("x", 0); mainText.setAttribute("y", 6); // Adjusted y position for main text mainText.setAttribute("text-anchor", "middle"); mainText.setAttribute("font-size", "22px"); mainText.setAttribute("fill", "#ffffff"); mainText.textContent = mainValue; group.appendChild(mainText); // Sub Text if (subValue) { const subText = document.createElementNS("http://www.w3.org/2000/svg", "text"); subText.setAttribute("x", 0); subText.setAttribute("y", 25); // Adjusted y position for sub text subText.setAttribute("text-anchor", "middle"); subText.setAttribute("font-size", "16px"); subText.setAttribute("fill", "#ffffff"); subText.textContent = subValue; group.appendChild(subText); } // Label with foreignObject for icon const labelY = labelPosition === "top" ? -(radius + 45) : radius + 15; // Increased offset for top labels const labelContainer = document.createElementNS("http://www.w3.org/2000/svg", "foreignObject"); labelContainer.setAttribute("x", -radius - 20); labelContainer.setAttribute("y", labelY); labelContainer.setAttribute("text-anchor", "middle"); labelContainer.setAttribute("width", radius * 2); labelContainer.setAttribute("height", labelPosition === "top" ? 60 : 40); // Adjusted label height labelContainer.innerHTML = ` <div xmlns="http://www.w3.org/1999/xhtml" style="display: flex; align-items: center; justify-content: center; text-align: center; font-size: 20px; color: white;"> <span class="iconify" data-icon="${icon}" style="margin-right: 5px;"></span> ${label} </div> `; group.appendChild(labelContainer); return group; }; // Add gauges to SVG svg.appendChild(createGauge( positions.PV.x, positions.PV.y, `${this.solarData.P_PV || 0} W`, null, Math.min((this.solarData.P_PV || 0) / this.config.MaxPowerPV, 1), pvColor, "PV", this.config.icons.P_PV, "top" )); svg.appendChild(createGauge( positions.Grid.x, positions.Grid.y, `${this.solarData.P_Grid || 0} W`, null, Math.min(Math.abs(this.solarData.P_Grid || 0) / this.config.MaxPower, 1), gridColor, "Grid", this.config.icons.P_Grid, "top" )); svg.appendChild(createGauge( positions.Akku.x, positions.Akku.y, `${this.solarSOC || 0}%`, `${this.solarData.P_Akku || 0} W`, Math.min(this.solarSOC / 100, 1), akkuColor, "Akku", this.config.icons.P_Akku, "bottom" )); svg.appendChild(createGauge( positions.House.x, positions.House.y, `${outerPower || 0} W`, null, Math.min(Math.abs(outerPower || 0) / this.config.MaxPower, 1), houseColor, "House", this.config.icons.P_Load, "bottom" )); wrapper.appendChild(svg); // Add dynamic text message below the gauge if (this.config.ShowText) { const textMessageDiv = document.createElement("div"); textMessageDiv.className = "text-message2"; const messageConfig = this.config.TextMessge || []; let selectedMessage = null; for (const message of messageConfig) { if ( (message.about && this.solarData.P_Grid > parseInt(message.about)) || (message.less && this.solarData.P_Grid < parseInt(message.less)) ) { // If no message is selected yet, or the new match is more specific if ( !selectedMessage || (message.about && parseInt(message.about) > parseInt(selectedMessage.about || -Infinity)) || (message.less && parseInt(message.less) < parseInt(selectedMessage.less || Infinity)) ) { selectedMessage = message; } } } if (selectedMessage) { if (this.config.debug) { console.log("[MMM-FroniusSolar2] Selected text message:", selectedMessage); } textMessageDiv.innerHTML = ` <span style="color: ${selectedMessage.color}; font-size: 18px;"> ${selectedMessage.Text} </span> `; } else { textMessageDiv.innerHTML = ` <span style="color: #999; font-size: 16px;"> PV Anlage läuft... </span> `; } wrapper.appendChild(textMessageDiv); } return wrapper; } });node_helper.js::
const NodeHelper = require("node_helper"); module.exports = NodeHelper.create({ config: null, // Initially, no config is set start: function () { console.log("[MMM-FroniusSolar2] Node helper started"); }, socketNotificationReceived: function (notification, payload) { console.log("[MMM-FroniusSolar2] Received socket notification:", notification, payload); if (notification === "SET_CONFIG") { this.config = payload; if (this.config.debug) { console.log("[MMM-FroniusSolar2] Configuration received:", this.config); } this.startFetchingData(); } else if (notification === "GET_FRONIUS_DATA") { if (!this.config) return; if (this.config.debug) { console.log("[MMM-FroniusSolar2] GET_FRONIUS_DATA triggered"); } this.getFroniusData(); } }, startFetchingData: function () { if (this.config && this.config.InverterIP) { if (this.config.debug) { console.log("[MMM-FroniusSolar2] Starting data fetch interval for IP", this.config.InverterIP); } this.fetchInterval = setInterval(() => { this.getFroniusData(); }, 60000); // Fetch data every 60 seconds } }, getFroniusData: function () { if (!this.config || !this.config.InverterIP) return; const url = `http://${this.config.InverterIP}/solar_api/v1/GetPowerFlowRealtimeData.fcgi`; if (this.config.debug) { console.log("[MMM-FroniusSolar2] Fetching data from URL:", url); } fetch(url) .then(response => { if (this.config.debug) { console.log("[MMM-FroniusSolar2] Response received:", response); } if (!response.ok) { throw new Error(`HTTP error!`); } return response.json(); }) .then(data => { if (this.config.debug) { console.log("[MMM-FroniusSolar2] JSON data received:", data); } const siteData = data.Body.Data.Site; const inverterData = data.Body.Data.Inverters ? data.Body.Data.Inverters["1"] : {}; const result = { P_Akku: siteData.P_Akku || 0, P_Grid: siteData.P_Grid || 0, P_Load: siteData.P_Load || 0, P_PV: siteData.P_PV || 0, Inverters: { "1": { SOC: inverterData.SOC || 0 } }, }; if (this.config.debug) { console.log("[MMM-FroniusSolar2] Parsed result:", result); } this.sendSocketNotification("FRONIUS_DATA", result); }) .catch(error => { console.error("[MMM-FroniusSolar2] Error fetching data:", error); }); }, });This will create a lot of log entry. So only use this temporary. If you see any errors you can’t solve, please send me the logs.
Later use
pm2 flushto clear the logs. The log-file size will increase with this version quite fast. -
@waynerob11
Hi,
is this issue solved now? -
Hi, does meanwhil one of your fronius modules work whithout Problems? Tried the second one but no display at all. What changes in the config etc. are still necessary?
Regards Walter -
@TomOMaley
All modules work without any problems on my mirror. No errors, nothing in the logs and it gets data every 2 seconds.To go to the chat and post a mimimi only is not that helpful to find the error. Use the log-version above then you‘ll find your error.
Read the doc, install the latest module, enter a correct ip and activate the api in your inverter. I cannot see any more I can do here. At least post an error log or somerhing helpful.
-
@chrisfr1976 Dear Chris, I apologize for my unqualified question. Regards
-
Hi Chris,
Don’t know what I did but it’s all working now - only problem is all the circles are bunched up.
Also, how can I enlarge and bold the fonts -
@waynerob11
Hi,
please send a screenshot to understand clearly what you like to do. -
-
@waynerob11 Hi,
please check in your
config.jsthe radius value. It should beRadius: 50,. In the beginning when I released the module there was a copy+paste error. The radius was 80.
If you want to enlarge everything as I see the gauge radius on your mirror you need do go deeper into the
MMM-FroniusSolar2.jsfile:- Adjust text size in
// Main Text | // Sub Textarea. - Modify gauge coordinates here:
const positions = { PV: { x: 75, y: 75 }, Grid: { x: 225, y: 75 }, Akku: { x: 75, y: 225 }, House: { x: 225, y: 225 } };- If everything is bigger modify also the view box:
svg.setAttribute("viewBox", "0 -20 300 350"); // Adjusted viewBox to fix label cutoffThe view box part is really annoying. It does not what you expect (The gauges do not have 50px. In fact everything is scaled in the viewbox). If you have a working status which might be useful for others, please share. I cannot support here since it is really tricky.
- Adjust text size in
