Bugsounet and MMM-Pir

[myfingersarecold]

@sdetweil

added to the 3rd party module wiki list under the other PIR modules. github page linked as well.

https://github.com/ryanjblajda/MMM-SimplePIR

[sdetweil]

@bitass i didnt say disable the modules. i said disable the notifications

from the updateNotifications module doc
https://docs.magicmirror.builders/modules/updatenotification.html#configuration-options

[sdetweil]

@bitass and he has blocked all his modules

[MMaik100]

so now the EXT-YouTube wont work either?

[sdetweil]

@MMaik100 yes, sadly all his modules will fail eventually, depending on how tight he coupled them

[coernel]

I also just looked for the module as I wanted to contribute some troubleshooting guide and didn’t find it.

As I have installed the module, what do you think about re-publishing it so that it doesn’t get lost?
It is MIT-license so no problem about that!

[coernel]

I have re-published it already: https://github.com/Coernel82/MMM-Pir

[sdetweil]

@coernel please add it to the third party list

[lif]

Hi,

Is this the correct place to ask questions about the module?

If so, is there any way to test that it is actually running?

I have installed the module for using a PIR module but nothing appears in the screen in the place I requested it.

Thanks

[sdetweil]

@lif have you verified that the PIR is working outside of MagicMirror??

[lif]

@sdetweil said in Bugsounet and MMM-Pir:

@lif have you verified that the PIR is working outside of MagicMirror??

Yes,

[sdetweil]

@lif and you are using the correct pin definition

    Pir: {
      mode: 0,
      gpio: 21
    },

[lif]

@sdetweil said in Bugsounet and MMM-Pir:

@lif and you are using the correct pin definition

    Pir: {
      mode: 0,
      gpio: 21
    },

Yes, the working script is:
from gpiozero import MotionSensor
from datetime import datetime
import os, time
import RPi.GPIO as GPIO

pir = MotionSensor(21)
while True:

    pir.wait_for_motion()
    now = datetime.now()
    current_time = now.strftime("%H:%M:%S")
    print("Movement detected at", current_time)
    pir.wait_for_no_motion()

[sdetweil]

@lif I meant MMM-PIR config setup

there are different numbering schemes for GPIO pins and different ways to access

the doc (readme) describes the different choices.

[lif]

@sdetweil said in Bugsounet and MMM-Pir:

@lif and you are using the correct pin definition

    Pir: {
      mode: 0,
      gpio: 21
    },

Yes, I think so, the pir is connected to pin 40 on the Raspberry pi 3b which I’m sure is GPIO 21

[sdetweil]

@lif and if you change to mode 1?? which matches your python lib test?

[lif]

@sdetweil said in Bugsounet and MMM-Pir:

@lif and if you change to mode 1?? which matches your python lib test?

No difference.

I have added a header: “PIR”, line before the config and that is not showing either.

[sdetweil]

@lif are there any errors listed in the MM startup messages??

if using pm2 to auto start

pm2 logs --lines =xxx

xxx is number of most recent lines to display, default 15,
usually need 100 or more for full message list

[lif]

@sdetweil said in Bugsounet and MMM-Pir:

@lif are there any errors listed in the MM startup messages??

if using pm2 to auto start

pm2 logs --lines =xxx

xxx is number of most recent lines to display, default 15,
usually need 100 or more for full message list

Thanks for all your help
I think this line might be relevant
0|mm | [2025-03-24 16:54:30.994] [WARN] No /home/pi/MagicMirror/js/…/modules/MMM-Pir/MMM-Pir.js found for module: MMM-Pir.

It’s correct, there isn’t a MMM-Pir.js file in the MMM-Pir directory.

[sdetweil]

@lif module rules

module name (exact case) = folder name in modules folder
MUST contain at minimum a file name that matches(exact case) of the modulename.js

AND inside that file it MUST contain a module.register(name…)
where name MUST match (exact case) the module name