MMM-FHEM no Fhem statusdisplay

[Woody]

hi folks,
I’ve tried to install and activate the MMM-FHEM module but with not to much success. There was actually no problem neither with the installation nor the configuration but I can’t get it running. It doesn’t matter if I use Http or Https, I tried also differed Devices and Readings but no luck. This is my config and maybe someone can point me out something wrong or give me any idea in debugging this.

{
    			module: 'MMM-FHEM',
   			 position: 'bottom_bar',
    			config: {
      			host: '192.168.0.50',
      			port: '8083',
      			https: 'true',
      			devices: [
                  			{ deviceName: 'Lichtfenster',
                    			  deviceReadings: [
                                      			{ name: 'state', suffix: 'test1' },
                                 ],
                  },
                ],
    },
  },

any help will be appreciated. Thx in advance… Woody

[Nonamexp]

Hello, you have deactivate The Passwort in fhem?!

[strawberry 3.141]

@Woody I don’t have experience with this specific module, but I can tell you the way you defined the boolean https was always true.

In Javascript a string is always true no matter what the content is "hello" -> true, "true" -> true, "false" -> true.

If you remove the quotes and try again https: false, then you will really use http instead of https.

[Woody]

Thanks Folks,
it seem I was completely stumped. Sometimes I overlook the simplest things.
The password was the problem but, at least I think this is not a good solution to access Fhem without authorization. Anyway, problem solved - thanks a lot.

Rgs. Woody

[dominic]

@Woody said in MMM-FHEM no Fhem statusdisplay:

Thanks Folks,
it seem I was completely stumped. Sometimes I overlook the simplest things.
The password was the problem but, at least I think this is not a good solution to access Fhem without authorization. Anyway, problem solved - thanks a lot.

Rgs. Woody

Hi Woody,
how can i deactivate the passwort? I think my problem is the same.

[Woody]

in fhem you have to disable “basicAuth” in fhem.cfg like this…
#attr allowed_WEB basicAuth shjedIOhbn6BHFJjGH

[dominic]

@Woody said in MMM-FHEM no Fhem statusdisplay:

attr allowed_WEB basicAuth shjedIOhbn6BHFJjGH

Hi Woody, thanky you for your answer. Can you explain it?
I have defined WEB and than ? Sorry i am very new in FHEM what means " shjedIOhbn6BHFJjGH"?

[dominic]

@Woody
So i now there is this entrie in the config.cfg “define allowed_WEB allowed
#attr allowed_WEB basicAuth xxxxxxxxxxxxxxx
#attr allowed_WEB validFor WEB”

and my config.js looks like this

{
    module: 'MMM-FHEM',
    position: 'top_right',
    config: {
      host: 'localhost',
      port: '8083',
      https: false,
	        devices: [
                  { deviceName: 'ESPEasy_ESP_Test_DHT',
                    deviceReadings: [
                                      { name: 'Temperatur', icon: 'wi wi-thermometer', suffix: '°' },
                                      { name: 'Humidity', icon: 'wi wi-humidity', suffix: '%' },
                                    ],
                  },
                  { deviceName: '',
                    deviceReadings: [
                                      { name: 'Temperatur', icon: 'wi wi-thermometer', suffix: '°' },
                                      { name: 'Humidity', icon: 'fa fa-battery-half', suffix: '' },                                      
                                    ],
                  },
                ],
    },
  },

And this is in FHEM…

where is the mistake?

[Woody]

@dominic said in MMM-FHEM no Fhem statusdisplay:
shjedIOhbn6BHFJjGH is your base64 encoded string of user:password in your fhem.cfg.
In your forelast post it seems to be out commented with a # as i recommended in my last post. For me this means that you’ve no authentication in place and your original problem seems not to be an authorization issue.

[dominic]

@Woody Thank you, yes i think my originlproblem is not the authorization.
Do you have any idea., what it could be ?