Read the statement by Michael Teeuw here.
Nothing showing but app is running
-
@dikkedimi said in Nothing showing but app is running:
updated today and now I have a similar issue. App is running but the screen is black. Ran apt-get update & apt-get upgrade in the hopes it would fix itself, but nope :)
pi@jarvis:~ $ pm2 log [TAILING] Tailing last 15 lines for [all] processes (change the value with --lines option) /home/pi/.pm2/pm2.log last 15 lines: PM2 | 2017-04-02 18:19:27: PM2 PID file : /home/pi/.pm2/pm2.pid PM2 | 2017-04-02 18:19:27: RPC socket file : /home/pi/.pm2/rpc.sock PM2 | 2017-04-02 18:19:27: BUS socket file : /home/pi/.pm2/pub.sock PM2 | 2017-04-02 18:19:27: Application log path : /home/pi/.pm2/logs PM2 | 2017-04-02 18:19:27: Process dump file : /home/pi/.pm2/dump.pm2 PM2 | 2017-04-02 18:19:27: Concurrent actions : 2 PM2 | 2017-04-02 18:19:27: SIGTERM timeout : 1600 PM2 | 2017-04-02 18:19:27: =============================================================================== PM2 | 2017-04-02 18:19:27: Starting execution sequence in -fork mode- for app name:mm id:0 PM2 | 2017-04-02 18:19:27: App name:mm id:0 online PM2 | 2017-04-02 18:21:20: Stopping app:mm id:0 PM2 | 2017-04-02 18:21:20: App [mm] with id [0] and pid [1474], exited with code [0] via signal [SIGINT] PM2 | 2017-04-02 18:21:20: pid=1474 msg=process killed PM2 | 2017-04-02 18:26:49: Starting execution sequence in -fork mode- for app name:mm id:0 PM2 | 2017-04-02 18:26:49: App name:mm id:0 online /home/pi/.pm2/logs/mm-error-0.log last 15 lines: 0|mm | 0|mm | 0|mm | error: cannot open .git/FETCH_HEAD: Permission denied 0|mm | 0|mm | 0|mm | [29012:0402/175739.310033:FATAL:bus.cc(1197)] D-Bus connection was disconnected. Aborting. 0|mm | #0 0x0000011cf88c 0|mm | #1 0x0000011bbc1a 0|mm | #2 0x000001e9a6b6 0|mm | 0|mm | [1665:0402/181857.627309:FATAL:bus.cc(1197)] D-Bus connection was disconnected. Aborting. 0|mm | #0 0x0000011cf88c 0|mm | #1 0x0000011bbc1a 0|mm | #2 0x000001e9a6b6 0|mm | /home/pi/.pm2/logs/mm-out-0.log last 15 lines: 0|mm | Initializing new module helper ... 0|mm | Module helper loaded: calendar 0|mm | No helper found for module: currentweather. 0|mm | No helper found for module: airquality. 0|mm | No helper found for module: weatherforecast. 0|mm | No helper found for module: MMM-Hue. 0|mm | All module helpers loaded. 0|mm | Starting server on port 8666 ... 0|mm | Starting server op port 8666 ... 0|mm | Server started ... 0|mm | Connecting socket for: updatenotification 0|mm | Connecting socket for: calendar 0|mm | Starting node helper for: calendar 0|mm | Sockets connected & modules started ... 0|mm | Launching application. [STREAMING] Now streaming realtime logs for [all] processes pi@jarvis:~ $ tail -f /home/pi/.pm2/logs/mm-error-0.log [29012:0402/175739.310033:FATAL:bus.cc(1197)] D-Bus connection was disconnected. Aborting. #0 0x0000011cf88c #1 0x0000011bbc1a #2 0x000001e9a6b6 [1665:0402/181857.627309:FATAL:bus.cc(1197)] D-Bus connection was disconnected. Aborting. #0 0x0000011cf88c #1 0x0000011bbc1a #2 0x000001e9a6b6I have the same problem as you. I run the server on a pi zero and the the display is on a pi3 on the same network. It loads fine without any erros on the pi zero but when I go to the website I only get a black screen.
-
-
@Fix-Not-Found I’ve got everything on a pi3 now not sure how I fixed this back then.
-
@Fix-Not-Found said in Nothing showing but app is running:
having this issue for a school project right now. Did you two ever have any sucess fixing it?
Are there any errors being reported in your terminal or dev console? If so, post them here
-
@Fix-Not-Found I did not. But after formating and reinstalling it worked just fine. No idea what the problem was!
-
All’s well that ends well.
-
@fiskaren I’m going to attempt the above comment next class, but in the meantime, how would I go about that?
-
@Fix-Not-Found said in Nothing showing but app is running:
how would I go about that?
I don’t know that formatting is necessary. However, you could try this and know if you were successful in less than an hour.
