MMM-PrayerTime

[noorm91]

            {
                    module: 'MMM-PrayerTime',
                    position: 'top_right',
                    config: {
                            apiVersion: '1.0',
                            lat: 55.841727,
                            lon: 13.303381,
                            timezone: 'Europe/Stockholm',
                            method: 3,
                            playAdzan: ['fajr', 'dhuhr', 'asr', 'maghrib', 'isha'],
                            notDisplayed: ['midnight', 'sunset'],
                            useUpdateInterval: true,
                            updateInterval: 86400 * 1000,
                            animationSpeed: 2.5 * 1000,
                            language: config.language,
                            showAdzanAlert: true,
                            alertTimer: 15000
                            }
            },

Salam, changed it but still not working :( lon/lat: is ok? how about language: ?
Actually this is my first module I’m trying to get working, pretty new to MM2 so maybe I need to change somewhere else too.

The module is under here;
pi@raspberrypi:~/MagicMirror/modules $ ls
default MMM-PrayerTime node_modules README.md

pi@raspberrypi:~/MagicMirror/modules/MMM-PrayerTime $ ls
LICENSE MMM-PrayerTime.css MMM-PrayerTime.js node_helper.js README.md res screenshot2.jpg screenshot-alert.png screenshot.png translations

[slametps]

@noorm91 said in MMM-PrayerTime:

            {
                    module: 'MMM-PrayerTime',
                    position: 'top_right',
                    config: {
                            apiVersion: '1.0',
                            lat: 55.841727,
                            lon: 13.303381,
                            timezone: 'Europe/Stockholm',
                            method: 3,
                            playAdzan: ['fajr', 'dhuhr', 'asr', 'maghrib', 'isha'],
                            notDisplayed: ['midnight', 'sunset'],
                            useUpdateInterval: true,
                            updateInterval: 86400 * 1000,
                            animationSpeed: 2.5 * 1000,
                            language: config.language,
                            showAdzanAlert: true,
                            alertTimer: 15000
                            }
            },

Salam, changed it but still not working :( lon/lat: is ok? how about language: ?
Actually this is my first module I’m trying to get working, pretty new to MM2 so maybe I need to change somewhere else too.

The module is under here;
pi@raspberrypi:~/MagicMirror/modules $ ls
default MMM-PrayerTime node_modules README.md

pi@raspberrypi:~/MagicMirror/modules/MMM-PrayerTime $ ls
LICENSE MMM-PrayerTime.css MMM-PrayerTime.js node_helper.js README.md res screenshot2.jpg screenshot-alert.png screenshot.png translations

You may simply remove language: config.language line, and see if this work. It tells MMM-PrayerTime module to use MM global language config. If not work, please use 'en' for language entry.

[noorm91]

Alhamdulillah almost there, the module shows up in top_right with this conf, but it just says " Loading … " any known reason?

            {
                    module: 'MMM-PrayerTime',
                    position: 'top_right',
                    config: {
                            apiVersion: '1.0',
                            lat: 55.841727,
                            lon: 13.303381,
                            timezone: "Europe/Stockholm",
                            method: 3,
                            playAdzan: ['fajr', 'dhuhr', 'asr', 'maghrib', 'isha'],
                            notDisplayed: ['midnight', 'sunset'],
                            useUpdateInterval: true,
                            updateInterval: 86400 * 1000,
                            animationSpeed: 2.5 * 1000,
                            language: 'en',
                            showAdzanAlert: true,
                            alertTimer: 15000
                            }
            },

[slametps]

@noorm91 can you post the pm2/mm log?

[zzaidi148]

@slametps Alhamdulillah I got it work by taking out the language line. It works well now. I was wondering if there was any way I could take out the Imsak times from the module and to have the times be in a 12 hour format. Also, how do I make sure that it plays the athan? Thanks for all the help!

[slametps]

@zzaidi148 said in MMM-PrayerTime:

@slametps Alhamdulillah I got it work by taking out the language line. It works well now. I was wondering if there was any way I could take out the Imsak times from the module and to have the times be in a 12 hour format. Also, how do I make sure that it plays the athan? Thanks for all the help!

You can remove Imsak from the schedule by adding config notDisplayed: ['midnight', 'sunset', 'imsak']. Currently, support 24-hour format only.
Your MM has speaker? If yes, you can check type following command in console:
/usr/bin/omxplayer -o hdmi modules/MMM-PrayerTime/res/adzan.mp3
It will play adzan.mp3.

[noorm91]

I will try get the log when I’m home, just a simple question, does this work with Midori browser, because that is the one I’m using on Rpi 1 model b…I entered my Rpi IP address in chrome from my computer and then I saw the module perfectly.

[slametps]

@noorm91 said in MMM-PrayerTime:

I will try get the log when I’m home, just a simple question, does this work with Midori browser, because that is the one I’m using on Rpi 1 model b…I entered my Rpi IP address in chrome from my computer and then I saw the module perfectly.

Sorry, I haven’t test it on midori browser.

[zzaidi148]

Is it possible to use another api service like islamic finder or salah times api so it would allow for 12-hour format? Thank You

[slametps]

@zzaidi148 said in MMM-PrayerTime:

Is it possible to use another api service like islamic finder or salah times api so it would allow for 12-hour format? Thank You

You should modify the module according to each API provider data. Why should be 12-hour format?