MMM-xiaomi - Temperature and Humidity from your smarthome

trividar · Nov 15, 2017, 7:26 PM

could someone help me? I installed it how described but it didn’t show any informations on the MM just temperature/humidity. At the beginning i see connecting to xiaomi getway and after that nothing. In the MM out i get this:

Found device with ID 158.... of type sensor

but no errors.

Once I saw this, but just once (but nothing on the mirror):

mirko3000 · Nov 15, 2017, 8:11 PM

So technically your gateway and sensors seem to be working properly. What exactly is the problem? Did you configure your rooms and devices as described? Do you see anything on the MM? “just temperature/humidity” - that is actually the main feature :)

trividar · Nov 15, 2017, 8:23 PM

Hi mirko,
the problem is, that i did’t see any values on the MM:

and also something strange, if i start this module my WunderGround module change the top of it:

if I disable this module it looks like usual, i changed in other positions but the same things.

Why is this happen?
What you mean with: “Did you configure your rooms and devices as described?” I did exactly what was on github.

THX a lot for your help

mirko3000 · Nov 15, 2017, 8:24 PM

Can you post the configuration for the Xiaomi module? You need to provide a list of rooms, each of one with the assigned device IDs:

	            rooms:  [
	            	{
		            	name: 'Room 1',
		            	sortOrder: 40,
		            	devices : ['158d010171840d', '158d00016cddae']
	            	},
	            	{
		            	name: 'Room2',
		            	sortOrder: 70,
		            	devices : ['158d0001735ac2']
	            	}]

Also please check that you use the latest version.

About that WunderGround module: I need to test that myself, not sure why there are such kind of interferences.

trividar · Nov 15, 2017, 8:26 PM

I have the latest version and thats my config:

{
		module: 'MMM-xiaomi',
		position: 'bottom_left',
		header: 'Temperature / Humidity',  // This is optional
		config: {
			interval: 30,
			gatewayIP: '192.168.1.128',
			gatewayToken: '65764848557cccc2170d1fd8c06b32cb',
			devices: [{ 
			id: '158d0001dfdb14', 
			name: 'Schlafzimmer temp' 
			}]
			// See 'Configuration options' for more information.
		}
	},

mirko3000 · Nov 15, 2017, 8:29 PM

That is the config for the old version. Please check the README carefully:
https://github.com/mirko3000/MMM-xiaomi#configuration-options

{
		module: 'MMM-xiaomi',
		position: 'bottom_left',
		header: 'Temperature / Humidity',  // This is optional
		config: {
			interval: 30,
			gatewayIP: '192.168.1.128',
			gatewayToken: '65764848557cccc2170d1fd8c06b32cb',
			rooms: [{ 
			       name: 'Schlafzimmer temp' ,
                               devices:[ '158d0001dfdb14'],
                               sortOrder: 1
			}]
		}
	},

trividar · Nov 15, 2017, 8:32 PM

oooo shit…my mistake! It works now… thank’s a lot for your help…your a hero.
please chack this with WunderGround it would be really nice…

THANKS A LOT!

Albert2002 · Nov 18, 2017, 9:21 AM

I’ve pulled the latest update today. Since this i don’t see the temperature / humidity any more. I don’t have any errors in my logs depending MMM-xiaomi. The config.js is the same as well. Browser debug without errors. The only error which is new in my log is about the module nerwork scanner.

By the way: Do I add the window sensors the same way as the Temperature sensor? Which lights are supported?

mm error:

TypeError: Cannot read property 'network' of undefined
    at Class.scanNetworkMAC (/home/pi/MagicMirror/modules/MMM-NetworkScanner/node_helper.js:42:36)
    at Class.socketNotificationReceived (/home/pi/MagicMirror/modules/MMM-NetworkScanner/node_helper.js:30:18)
    at Socket. (/home/pi/MagicMirror/modules/node_modules/node_helper/index.js:103:11)
    at emitTwo (events.js:106:13)
    at Socket.emit (events.js:194:7)
    at /home/pi/MagicMirror/node_modules/socket.io/lib/socket.js:514:12
    at _combinedTickCallback (internal/process/next_tick.js:73:7)
    at process._tickCallback (internal/process/next_tick.js:104:9)

mm out:


> magicmirror@2.1.3 start /home/pi/MagicMirror
> sh run-start.sh

Starting MagicMirror: v2.1.3
Loading config ...
Loading module helpers ...
No helper found for module: alert.
No helper found for module: clock.
Initializing new module helper ...
Module helper loaded: calendar
No helper found for module: currentweather.
No helper found for module: weatherforecast.
Initializing new module helper ...
Module helper loaded: MMM-Remote-Control
Initializing new module helper ...
Module helper loaded: MMM-DWD-WarnWeather
Initializing new module helper ...
Module helper loaded: MMM-PNews
Initializing new module helper ...
Module helper loaded: newsfeed
Initializing new module helper ...
Module helper loaded: internet-monitor
Initializing new module helper ...
Module helper loaded: MMM-MovieListings
Initializing new module helper ...
Module helper loaded: MMM-Fuel
Initializing new module helper ...
Module helper loaded: MMM-NetworkScanner
Initializing new module helper ...
Module helper loaded: MMM-nasaastropic
Initializing new module helper ...
Module helper loaded: MMM-SystemStats
No helper found for module: MMM-Carousel.
Initializing new module helper ...
Module helper loaded: MMM-Events
Initializing new module helper ...
Module helper loaded: MMM-xiaomi
All module helpers loaded.
Starting server on port 8080 ... 
You're using a full whitelist configuration to allow for all IPs
Server started ...
Connecting socket for: calendar
Starting node helper for: calendar
Connecting socket for: MMM-Remote-Control
Starting node helper for: MMM-Remote-Control
Connecting socket for: MMM-DWD-WarnWeather
MMM-DWD-WarnWeather helper started...
Connecting socket for: MMM-PNews
Starting module: MMM-PNews
Connecting socket for: newsfeed
Starting module: newsfeed
Connecting socket for: internet-monitor
internet-monitor helper started ...
Connecting socket for: MMM-MovieListings
MMM-MovieListing helper started...
Connecting socket for: MMM-Fuel
Starting module helper: MMM-Fuel
Connecting socket for: MMM-NetworkScanner
Starting module: MMM-NetworkScanner
Connecting socket for: MMM-nasaastropic
Starting node helper: MMM-nasaastropic
Connecting socket for: MMM-SystemStats
Connecting socket for: MMM-Events
Starting node_helper for: MMM-Events
Connecting socket for: MMM-xiaomi
Starting xiaomi helper
Sockets connected & modules started ...
Launching application.
MMM-NetworkScanner received SCAN_NETWORK
MMM-NetworkScanner is performing arp-scan
Whoops! There was an uncaught exception...
MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
Create new calendar fetcher for url: https://calendar.google.com/calendar/ical/basic.ics - Interval: 300000
Create new news fetcher for url: http://www.haz.de/rss/feed/haz_schlagzeilen - Interval: 300000
Create new news fetcher for url: http://www.spiegel.de/schlagzeilen/index.rss - Interval: 300000
starting internet monitor node helper
MMM-NetworkScanner received CONFIG
astro helper: config received
retrieveAndUpdate()
Sat Nov 18 2017 10:10:53 GMT+0100 (CET): Triggering Xiaomi Gateway connect
NASA Astro Pic of the Day URL: https://apod.nasa.gov/apod/image/1711/20171117dawnTezel1200c.jpg
Found device with ID 158d000119fcb2 of type magnet
Found device with ID 158d00015aa973 of type controller
Found device with ID 158d00015736a8 of type sensor

mirko3000 · Nov 18, 2017, 10:53 AM

Can you post your configuration for the module? You now need to define your rooms, it looks like the module simply does not find any room to show.
And yes, you add all devices to your room configuration, the module can identify the type and handle it correspondingly.

BTW: suggest tracking issues on the github issue tracker: https://github.com/mirko3000/MMM-xiaomi/issues

Albert2002 · Nov 18, 2017, 1:01 PM

Am sorry, it was my mistake. I did not checked my config.js. Out of nowhere there was again

devices:

instead of

rooms:

Thank you for your help!

I’ve tried to get the icon for the open state of the window sensors working this way:
The first ID is the temperature sensor, the second one the window sensors:

{
		module: 'MMM-xiaomi',
		position: 'bottom_left',
		header: 'Temperatur / Feuchtigkeit',  // This is optional
		config: {
			gatewayIP: '192.168.2.160',
			gatewayToken: '6ebf9b84e5c615c09268166a99b95f0a',
			showWindow: true,
			rooms: [
			{ name: 'Wohnzimmer', sortOrder: 30, devices : ['158d00015736a8', '158d000119fcb2'] },
					]
				}
		},

and this way:

{
		module: 'MMM-xiaomi',
		position: 'bottom_left',
		header: 'Temperatur / Feuchtigkeit',  // This is optional
		config: {
			gatewayIP: '192.168.2.160',
			gatewayToken: '6ebf9b84e5c615c09268166a99b95f0a',
			rooms: [
			{ name: 'Wohnzimmer', sortOrder: 30, showWindow: true, devices : ['158d00015736a8', '158d000119fcb2'] },
					]
				}
		},

Both times MM did not started because of errors in the config. How is the right way to get this solved?