Need help with internet monitor-module

schlachtkreuzer6

@duedahlb
Please post your config here (don’t forget to delete your APIs, addresses and any other privacy related info) thanks

duedahlb

The script below is the one i want to put in “top_right” corner
modules: [
{
module: ‘internet-monitor’,
position: ‘top_center’,
header: ‘Internet Monitor’,
config:{
type: ‘’,
maxTime: 20000,
updateInterval: 0,
verbose: false,
displayStrength: true,
displaySpeed: true,
strengthIconSize: 80,
maxGaugeScale: 100,
wifiSymbol:{
size: 50,
fullColor: ‘#3afc25’,
almostColor: ‘#ffff0c’,
halfColor: ‘#ff8c00’,
noneColor: ‘#ff1111’
},
},
}
]

/* Magic Mirror Config Sample
*

By Michael Teeuw http://michaelteeuw.nl
MIT Licensed.
For more information how you can configurate this file
See https://github.com/MichMich/MagicMirror#configuration

*/

var config = {
address: “localhost”, // Address to listen on, can be:
// - “localhost”, “127.0.0.1”, “::1” to listen on loopback interface
// - another specific IPv4/6 to listen on a specific interface
// - “”, “0.0.0.0”, “::” to listen on any interface
// Default, when address config is left out, is “localhost”
port: 8080,
ipWhitelist: [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”], // Set [] to allow all IP addresses
// or add a specific IPv4 of 192.168.1.5 :
// [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.1.5”],
// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
// [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.3.0/28”],

language: "en",
timeFormat: 24,
units: "metric",

modules: [
	{
		module: "alert",
	},
	{
		module: "updatenotification",
		position: "top_bar"
	},
	{
		module: "clock",
		position: "top_left"
	},
	{
		module: "calendar",
		header: "US Holidays",
		position: "top_left",
		config: {
			calendars: [
				{
					symbol: "calendar-check-o ",
					url: "webcal://www.calendarlabs.com/templates/ical/US-Holidays.ics"
				}
			]
		}
	},
	{
		module: "compliments",
		position: "lower_third"
	},
	{
		module: "currentweather",
		position: "top_right",
		config: {
			location: "New York",
			locationID: "",  //ID from http://www.openweathermap.org/help/city_list.txt
			appid: "YOUR_OPENWEATHER_API_KEY"
		}
	},
	{
		module: "weatherforecast",
		position: "top_right",
		header: "Weather Forecast",
		config: {
			location: "New York",
			locationID: "5128581",  //ID from http://www.openweathermap.org/help/city_list.txt
			appid: "YOUR_OPENWEATHER_API_KEY"
		}
	},
	{
		module: "newsfeed",
		position: "bottom_bar",
		config: {
			feeds: [
				{
					title: "New York Times",
					url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
				}
			],
			showSourceTitle: true,
			showPublishDate: true
		}
	},
]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== “undefined”) {module.exports = config;}

duedahlb

@schlachtkreuzer6 I uploaded the standard file now… and the script module i want to use too

schlachtkreuzer6

@duedahlb

Check your quotes. Change this: ’ to this: " and apply the missing quotes @

Maxtime
update … Etc.

doubleT

And please check the following link: https://forum.magicmirror.builders/topic/4247/how-to-post-code-on-the-forum-for-absolute-beginners/2

Right now, the config.js you posted is near-unreadable.

yawns

Both schlachtkreuzer6 and doubleT are totally right. I tried to change the post with your config, but akismet.com flags this as spam.
Besides wrong quotes the position of your added module was incorrect.
Please try this config:

/* Magic Mirror Config Sample

By Michael Teeuw http://michaelteeuw.nl
MIT Licensed.
For more information how you can configurate this file
See https://github.com/MichMich/MagicMirror#configuration
*/

var config = {
address: "localhost",
port: 8080,
ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses

language: "en",
timeFormat: 24,
units: "metric",

modules: [
	{
		module: "alert",
	},
	{
		module: "updatenotification",
		position: "top_bar"
	},
	{
		module: "clock",
		position: "top_left"
	},
	{
		module: "calendar",
		header: "US Holidays",
		position: "top_left",
		config: {
			calendars: [
				{
					symbol: "calendar-check-o ",
					url: "webcal://www.calendarlabs.com/templates/ical/US-Holidays.ics"
				}
			]
		}
	},
	{
		module: "compliments",
		position: "lower_third"
	},
	{
		module: "currentweather",
		position: "top_right",
		config: {
			location: "New York",
			locationID: "",  //ID from http://www.openweathermap.org/help/city_list.txt
			appid: "YOUR_OPENWEATHER_API_KEY"
		}
	},
	{
		module: "weatherforecast",
		position: "top_right",
		header: "Weather Forecast",
		config: {
			location: "New York",
			locationID: "5128581",  //ID from http://www.openweathermap.org/help/city_list.txt
			appid: "YOUR_OPENWEATHER_API_KEY"
		}
	},
	{
		module: "newsfeed",
		position: "bottom_bar",
		config: {
			feeds: [
				{
					title: "New York Times",
					url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
				}
			],
			showSourceTitle: true,
			showPublishDate: true
		}
	},
	{
		module: "internet-monitor",
		position: "top_center",
		header: "Internet Monitor",
		config: {
			type: "",
			maxTime: 20000,
			updateInterval: 0,
			verbose: false,
			displayStrength: true,
			displaySpeed: true,
			strengthIconSize: 80,
			maxGaugeScale: 100,
			wifiSymbol: {
				size: 50,
				fullColor: "#3afc25",
				almostColor: "#ffff0c",
				halfColor: "#ff8c00",
				noneColor: "#ff1111"
			},
		},
	},
]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

duedahlb

@yawns wow, thanks!, but now my screen is just black… tried rebooting:/ anu suggestions?

doubleT

Might not be the problem (as modern browser are pretty forgiving about this) but the last property of an object (or array) doesn’t get a trailing comma.

			}
		}
	}
]
};

Other than that I don’t see any obvious problems. A black screen is better than a config error because it might load the basic MM but just not the modules.

Now, what I can suggest and what a developer would do is:

Reduce the config.js to the basics or the originally suggested example.
Add one module after another, always checking if it works or not.
If one doesn’t work or breaks something, note it down, remove it, try the next one. Or figure out directly why it doesn’t work.

But that way you can easily point to where it breaks. Everything else is guesswork.

duedahlb

@yawns it gives me the damn config error… plz help!

schlachtkreuzer6

@duedahlb do you change the quotes and the missing quotes? than upload your config again pls.