MMM-Domiticz

Charley

I have added colour yellow to closed Blinds/shutters.
There is no added colour to lights, outlets because the are not visible when they are inactive.
However if you like to add a colour you can change the code in line 72
make sure you have a space between small and yellow just before the i-element for the icons

Peter

@Charley thanks, it works!
Maybe you can answer another question: when I close or open the screens with domotics, the icons changes ( and the text open- close) in my Magic Mirror screen but when I close or open the screens with the original remote the icon does not change on the MM screen, only on the domoticz screen.
I hope my question is clear enough.

Peter

Charley

Hello Peter,

There are two different things. One is Domoticz and the other is MagicMirror.
The module requests data from Domoticz. It is a reply in json.
This comes from my shutter.

{
         "AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : 0.0,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 255,
         "CustomImage" : 0,
         "Data" : "Open",
         "Description" : "",
         "DimmerType" : "abs",
         "Favorite" : 0,
         "HardwareID" : 7,
         "HardwareName" : "ZwaveUSB",
         "HardwareType" : "OpenZWave USB",
         "HardwareTypeVal" : 21,
         "HaveDimmer" : true,
         "HaveGroupCmd" : true,
         "HaveTimeout" : false,
         "ID" : "00000501",
         "Image" : "Light",
         "IsSubDevice" : false,
         "LastUpdate" : "2018-04-16 08:37:09",
         "Level" : 255,
         "LevelInt" : 255,
         "MaxDimLevel" : 100,
         "Name" : "Rolluik",
         "Notifications" : "false",
         "PlanID" : "7",
         "PlanIDs" : [ 7 ],
         "Protected" : false,
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "Status" : "Open",
         "StrParam1" : "",
         "StrParam2" : "",
         "SubType" : "Switch",
         "SwitchType" : "Blinds Inverted",
         "SwitchTypeVal" : 6,
         "Timers" : "true",
         "Type" : "Light/Switch",
         "TypeImg" : "blinds",
         "Unit" : 1,
         "Used" : 1,
         "UsedByCamera" : false,
         "XOffset" : "698",
         "YOffset" : "1168",
         "idx" : "31"
      },

The Image in this record is not the image in the MagicMirror. The MagicMirror Icons are from Fontawesome version 4.7 there is now a version 5 available but doesn’t like to work along 4.7 in MagicMirror.

The icons you see in my module are based on the type of device retrieved with the json file from Domoticz. See the lines in my code from 55 to line 71

There are no icons for shutters/shades or similar in fontawesome. That is why I use the status text from Domoticz. (In the Netherlands the webinterface is in Dutch but you will see that the status of the blinds are in English)

Hope this clarifies the icon issue.

Charley

Updated today with Humidity and the possibility to not show the subMenus.

I choose not to add the Barometric Pressure and Sound Levels from Netatmo because my screen would be high enough in portrait mode.

jaminben

Hi Charley,

I’m a newbie to MM so excuse me if the answer is obvious… the temperature and humidity work correctly but is there a way to display one after the other for the same sensor… so in my example screenshot you can see it lists all the temperatures first and then the humidity readings.

Anyway, many thanks for creating the module… it’s fantastic :)

0_1524401116389_house Tempretures.jpg

Charley

@jaminben Thanks for the thank you, i am still working on it to make it better.

You can add more in your config.js settings

      showItems: ['temperature','energy','battery','co', 'blinds','humidity','baro'],   // possible items  temperature, energy, battery, co, blinds, humidity,  baro

Could you please reply with your config settings for this module .(delete any personal information ip,username or password)

I think I misread your question, however all sensors data are grouped in the newest version.

jaminben

@Charley said in MMM-Domiticz:

@jaminben Thanks for the thank you, i am still working on it to make it better.

You can add more in your config.js settings
      showItems: ['temperature','energy','battery','co', 'blinds','humidity','baro'],   // possible items  temperature, energy, battery, co, blinds, humidity,  baro
Could you please reply with your config settings for this module .(delete any personal information ip,username or password)

I think I misread your question, however all sensors data are grouped in the newest version.

@Charley

My config.js file…

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: ******,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1", "********"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "en",
	timeFormat: 24,
	units: "metric",

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "*******",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check-o ",
						url: "********"
					}
				]
			}
		},
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "*******",
				locationID: "*****",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "******"
			}
		},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "********",
				locationID: "*******",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "*****"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "BBC News",
						url: "http://feeds.bbci.co.uk/news/uk/rss.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
		{
			module: "MMM-Domoticz",
			position: "top_right",   // see mirror setting for options
			config: {          
				updateInterval: 45, // every 45 seconds
				apiBase: '******',
				apiPort: ****,
				apiUser: "*******",
					apiPw: "********",
				temperatureTitle: "Current House Temperatures",
				moduleTitle: "My smart home by Domoticz",
				energyTitle: "Energy used by",
				batteryTitle: "Battery level",
				coTitle: "CO2 level",
				blindsTitle: "Blinds",
				energyNow: "Currently",
				energyTotal: "Energy used",
				batteryThreshold: 20,
						coThreshold: 650,
				subMenus: true,
				showItems: ['temperature'],   // possible items  temperature, energy
				excludedDevices: ['none','add your own']  // Device that will not be shown
			}
		},
		{
			module: 'MMM-Todoist',
			position: 'top_right',	// This can be any of the regions. Best results in left or right regions.
			header: 'Todoist', // This is optional
			config: { // See 'Configuration options' for more information.
				accessToken: '********',
				maximumEntries: 60,
				updateInterval: 10*60*1000, // Update every 10 minutes
				projects: [ 166564794 ],
				fade: false
		  }
		},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

What I was trying to was something like:

Garden 24.1 (temperature)
55% (humidity)
Lounge 20.2 (temperature)
45% (humidity)
Garage 22.1 (temperature)
48% (humidity)

Rather than:

Garden 24.1 (temperature)
Lounge 20.2 (temperature)
Garage 22.1 (temperature)
Garden 55% (humidity)
Lounge 45% (humidity)
Garage 48% (humidity)

jaminben

@Charley

I just updated to the new version and it only shows the temperature now… not sure if that was intended or not.

Charley

You need to add humidity and baro to the showItems part in config.js
to see all options (someone asked in PM to block humidity)

 showItems: ['temperature','energy','battery','co', 'blinds','humidity','baro']

It will now show the way you like it

0_1524409121269_all together.png

jaminben

@Charley

Very cool… can I make one suggestion? How about if it detects that it already has a name present for the temperature it doesn’t display the name for the humidity and/or baro just the value? That way you don’t get duplicate names for the same sensor.

I can see in yours you have Woonkamer (Living Room) repeated 3 times which I assume is the same sensor?