Interesting!
Are MM and GA independend or can you influence MM with GA (like showing or hiding modules)?
I think I made my mirror in the same way.
I have the original Google AIY kit in my MM.
They work independend: I can ask Google any kind of questions, set timers and turn on the gardenlights and the fountain in the pond with my voice.
But I cannot hide or show modules with voice.
I am very interested in integrating MM and GA, but I do not know how.
Peter

Thanks; this was what I was looking for!
My first mirror is a kitchen information screen too.
I will try to make this one too (with a personal touch).
Peter

My first MM is running smoothly for a couple of months now (best RPI project I have found on the internet).
Time for a second MM; with a complete different look and feel.
I came across this picture on Pinterest.
Does anybody know who made this miror?
I like it!
Thanks in advance.
Peter

That is exactly what I told you before.
Read the article and you will see how to connect the 3 wires.
And you can change the temperature of the fan to start.
My fan starts at 65 and runs for 30 seconds to cool the cpu.
Peter

https://hackernoon.com/how-to-control-a-fan-to-cool-the-cpu-of-your-raspberrypi-3313b6e7f92c
I use this.
It works fine, even wit a Google AIY Hat on top of the RPI.
I hope it works for you too.
Peter

Same here.
Sometimes it is back for a while.
But most of the time it is gone …
Peter

I have MM and Google assistant running on one rpi.
I used the original Goole AIY kit.
So I do not use MMM-assistant.
I can ask questions and get answers, but it is impossible to hide or show modules.
Peter

Well, I got it working!
MM and Google AIY on one RPI; great!
But I am not a technical person and need help.
Before I placed the AIY Hat, I had a pir connected to GPIO22.
Now the Hat covers all the GPIO pins, I still want to connect the Pir.
Is it possible to connect it to the bottom right connectors (saying GPIO22)?
Thanks for your help!
Peter

Did anyone of you get MM and Google AIY (the original kit) working together?
If so, can you please share your experience?
I have a MM running very smooth now and I own a AIY kit.
It would be nice to combine them!
Peter

Hi, this is the pir I am using:
https://www.tinytronics.nl/shop/nl/sensoren/optisch/ir-pyroelectrische-infrarood-pir-motion-sensor-detector-module-compact
It is more sensitive than I thought.
I removed the plastic dome, drilled a hole in the wooden rim of the mirror and mounted the pir.
Peter