MMM-Loxone

[idoodler]

@bobbythemoh I just pushed some changes, please update. Don’t forget to execute npm install after updating MMM-Loxone.

[bobbythemoh]

David, you are my hero, it works!!!
Energy Consumption of RPI + 24" Monitor Powered ON = 56W; 3.4W if no one is present in the room. AWESOME!
Thank you for the efforts!
May I also ask you for the feature request with displaying variables from the Miniserver? Id like to see things like the PV production or an analog value like the level in a tank.

Thank you so much!

[idoodler]

@bobbythemoh please create a separate Issue in Github for the power consumption thing.

[idoodler]

@bobbythemoh Please check the latest version of MMM-Loxone. It’s not possible to display custom states:)

[bobbythemoh]

Hi @idoodler ,

I have just tried to get the “observingUuids” working.
I dont get anything on the MM. My question: Is there a way to test if I did something wrong with “ALERT” or with “MMM-Loxone”

    modules: [
            {
                    module: "alert",
                    config: {
                            //display_time: "3500",
                            //alert_effect: "jelly",
                            //effect: "slide",
                            //position: "center"
                            }
            },

MMM-Loxone:

            {
                    module: "MMM-Loxone",
                    //position: "top_right", //macht keinen Sinn, ga kein GUI
                    config: {
                            host: "192.168.0.200",
                            user: "XXX",
                            pwd: "XXX",
                            presence: "true",
                            //roomUuid: "0ea3ebd1-00eb-0517-ffff390cde3b9b45", //Arbeitszimmer
                            roomUuid: "0ea3ebd1-00eb-04ef-ffff390cde3b9b45", //Badezimmer
                            showInfoNotifications: "true",
                            showErrorNotifications: "true",
                            showSystemNotifications: "true",
                            observingUuids:[
                                            "103d9aaf-0037-597e-ffff390cde3b9b45",//Bad Luftfeuchte
                                            "11aee03b-01ea-a7bb-ffff390cde3b9b45"
                                            ]
                    }
            },

Furthermore, i found and interesting module called “mmm-openhabfloorplan”. I have seen it is using a HTTP server on the MagicMirror, would it be possible to adapt it for Loxone aswell?

Regading displaying Charts: I found an extension called “MMM-ImagePhotos” Do you have any Idea, how the “Energy-Monitor” data can be exported on regular basis, like every minute? I was thinking of making a python skript that creates a picture every X Minutes and puts it to the display with the MMM-ImagePhotos. Do you have any suggestions?

Thank you in advance.
Robert

[idoodler]

@bobbythemoh If you use the the observingUuids you need to add the module position.
The alert module config looks good, what notifications do you want to display?

The mmm-openhabfloorplan module looks cool. I will definetly look into it :thumbs_up:

You can create a python periodicaly fetches the statistic files from your Miniserver (http://192.168.0.200/stats) and creates an image from it, saves in the directory the MMM-ImagePhotos module listens to.

[Meininger]

Hi idoodler,

i have the same problem with the presence option. when i enable the option the display switches off with the light controller in the room. wenn the light in the room is going on, the display is also going on, but only the cursor in the left top is blinking, no MagicMirror information is shown. Ich have updated the MMM-Loxone Modul und the MMM installation, the command in previus postings don´t bring back the screen…

[teddy]

how can I make the table smaller? can someone help me?

[elmattt]

hi, loxone here too :)
i use mmm-remotecontrol with loxone to switch on and off the mirror, really easy to set-up :)
i give a try to your module and come back :)

[idoodler]

@meininger Hey, I just published an update of MMM-Loxone. Please update your MagicMirror, it fixes some connection issues.