MMM-AssistantMk2

[Sun]

Install mmm-hotword everything went fine during installation and load magic mirror normally. But no hotword detected.

also show in command promt.

Refreshed access token because it has expired. Expired at: 18:57:26 now is: 18:57:29
Refreshed access token because it has expired. Expired at: 19:57:29 now is: 18:57:29
Refreshed access token because it has expired. Expired at: 19:57:29 now is: 18:57:29
Refreshed access token because it has expired. Expired at: 19:57:29 now is: 18:57:30

and when click the microphone icon. I can only click once after restart and ask question. Hotword didn’t detect smart mirror, snowboy.

in command promt shows
at Speaker._write (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/speaker/index.js:183:23)
at doWrite (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/readable-stream/lib/_stream_writable.js:428:64)
at writeOrBuffer (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/readable-stream/lib/_stream_writable.js:417:5)
at Speaker.Writable.write (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/readable-stream/lib/_stream_writable.js:334:11)
at Conversation.conversation.on (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_helper.js:75:16)
at emitOne (events.js:116:13)
at Conversation.emit (events.js:211:7)
at ClientDuplexStream.Conversation.conversation.on (/home/pi/MagicMirror/modules/MMM-AssistantMk2/node_modules/google-assistant/components/conversation.js:154:12)
at emitOne (events.js:116:13)
Conversation Completed
[HOTWORD] << snowboy >> is detected.
[HOTWORD] stops listening

[A Former User]

@sun
have you removed or refreshed your credentials.json or default.json in MMM-AssistantMk2?

I suggest you remove or disable all other modules (including MMM-AssistantMk2) except MMM-Hotword in config.js and test it.

Definitely success with MMM-Hotword could make things simple and easy.

After removing all modules except MMM-Hotword in config.js, run MM.(npm start)
You can see;
[HOTWORD] begins listening
say smart mirror
You can see;

[HOTWORD] << smart mirror >> is detected.
[HOTWORD] stop listening

You should confirm this before going forward.

[A Former User]

@sun
OK. have you installed “MMM-NotificationTrigger” ?
Or give me a chat in this forum, or telegram me (@eouia)

[Sun]

Not yet install mmm-notificationtrigger.
Do I have to install mmm-notificationtrigger as well?
I manage to get
[HOTWORD] << smart mirror >> is detected.
[HOTWORD] stop listening

but when I say something. it won’t detect what I said. Only detect the hotword.

[Sun]

Got it done. Very nice. However, the sound is so lag. Might be because I run on rp3 and quite many modules in magic mirror.

[A Former User]

@sun
Maybe. I always use BT speaker for my RPI and ATB. I cannot bear the crumpled sounds from analog or USB.

[jomwells]

This is fantastic thank you, I have got everything set up, it hears and responds (on screen) to every request - but unfortunately I get no sound (no speaking feedback), when a youtube video plays, the sound works fine, do I need to change the output device somewhere? I’m struggling to find the config for it.

[A Former User]

@jomwells is there any suspicious errors?

[Sun]

@jomwells Are you using rp3 as magic mirror? I did get sound respond now and it really ugly. I do try both sound on tv via hdmi and from usb sound card. Assume that too much modules from magic mirror load.

[Sun]

@sean I would like to know more about MMM-Gaction regarding the deviceModelId - this should be done since register the device in mmm-assistantmk2. What about deviceInstanceId, where and how to?