not working

[branchi]

This post is deleted!

[bhepler]

@branchi - Let’s see if you have pm2 monitoring the mirror.

Start your pi.
SSH into your pi.
Run pm2 status all and see if you get a listing for the Magic Mirror process. If you get an error message, then you likely didn’t install pm2 properly.

Report back and let us know your results.

[branchi]

This post is deleted!

[lavolp3]

@branchi It’s going too far off topic but a hint:
If your Pi is not booting, look at what the LED’s do. They may be blinking at the beginning. That resembles a code which you can look up with google.

However, If it’s not too much work a completely new install is advisable.